Measure temperature in your rotomolding process and: Optimise heating & cooling cycles

1. Measure temperature in your rotomolding process and: Optimise heating & cooling cycles Reduce number of reject parts (cost savings) Increase productivity Reduce Set-up times Affordable temperature measurement Coolant packs prevent overheating of electronics Can be used as portable diagnostic or R&D equipment Real time data recording and display software

2. R E A L T I M E W I R E L E S S K-PAQ 365 transmitter computer K-PAQ 365 receiver machine arm Temperature data at your fingertips… K-PAQ 365 K-PAQ 365 is a portable device that conveniently attaches to a rotational mold, measuring mold temperature via k-type thermocouples. It does this in real time, allowing the molder to identify faults immediately and observe the response of the mold to changes in processing variables. K-PAQ 365 is also ideal for use during process set-up, whenever changes occur (new molds or change of material) as well as simple routine monitoring during run cycles. Diagnostics, quality control … K-PAQ 365 can be used as a diagnostic and quality control tool to ensure that the mold wall and also the internal mold air temperature is following the correct profile throughout the process. Data provided by the associated software is in continuous easy to read format for the operator. Simple and quick… K-PAQ 365 is attached to the mold framework or the platform using a the specially designed bracket that can come as standard on your molds. Prevent over heating of transmitter electronics… As an added safety feature K-PAQ 365comes with coolant packs to ensure that it does not overheat in the oven. K-PAQ 365 is able to withstand oven temperatures up to 350C (662°F) and is sealed to IP65 so that it can be used even if the moldings are cooled with heavy water spray. 493K Limited 23 Watch Hill Road, Ballyclare, County Antrim, BT39 9QW E:solutions@493k.com W:www.493k.com T:+44(0)2893 359922