1 / 13

RODRILL IMPACT MAST

RODRILL IMPACT MAST. MODEL ROIM-45. INTRODUCTION.

tom
Download Presentation

RODRILL IMPACT MAST

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RODRILL IMPACT MAST MODEL ROIM-45

  2. INTRODUCTION RODRILL Impact Mast is made in America. Masts range from 40’ to 70’ in overall length depending on your order. The mast consists of 4 main parts, the Mast structure, the Sled, the Boom Tip Connector, Vibratory Hammer, Hopper and Mandrel. The Impact Mast is typically installed on an excavator such as John Deere / Hitachi 450 / Caterpillar 345 or larger excavator. Application on smaller machines such as Cat 330 may be possible depending on mast length and vibratory hammer selection. The Impact vibro mast is sold with, and designed to operate with, proprietary vibratory hammers. These hammers are manufactured by American Pile Driving Equipment (APE) located in Kent, WA. These APE Vibratory Hammers are modified specifically for Geopier application. Available hammers range from 500 to 2500 inch pounds of Eccentric moment. The Vibro Hammer is fixed moment, variable amplitude, however variable moment hammers are available on special order basis. We have found that with the crowding ability of the Impact Mast, the fixed moment hammers perform well without the added complexity of the variable moment option. Vibro Hammers are available with Dynamic force ranging from 40 to 150 tons.

  3. TECHNICAL DETAILS • IMPACT MAST WITH 45’ CAPACITY, 59’ (17m) OAL • Standard Mast: • Includes the Holmes/Peterson Hopper and Mandrel setup. • Is 40’ container able. • Includes 3 parts Hoist System with max pull of 18- 22 tonnes and 2 part crowd of 15 tonnes. • Pressure gauge at cab to read hydraulic pressure for correlation to crowd pressure (customer to perform calibration in field). • In cab foot switch for set up functions. • Side tilt = 3 degrees. • Boom tip connector to fit your 450 class Excavator. • Wiring, vibro hosing, and fittings to attach the “Impact Mast” to your excavator. • Vibro sled + safety limit cables from vibro sled to hopper inc pad eyes

  4. IMPACT MAST MODEL UPPER SHEAVES • 60’ MAST / 48’ MANDREL TRAVEL • 45,000 LB HOIST / 30,000 LB CROWD CAPACITY • FORE / AFT LEVELING • SIDE/ SIDE LEVELING • NO CHANGE TO EXCAVATOR HYD SYSTEM • PRESSURE CONTROL & VALVES ON MAST • LOCKING VALVES • SELF ERECTING GP 13.2 VIBRO AUTO LOADING BUCKET HOPPER AUX. WINCH MANDREL CROWD & HOIST WINCHES BOOM TIP CONNECTOR LOWER SHEAVE REMOVABLE FOOT

  5. RODRILL IMPACT MAST MAINTENANCE REQUIREMENTS • DAILY INSPECTIONS • 1. Inspect wire rope for kinks, broken wires or other damage. • 2. Check shackles for proper fit and security. • 3. Inspect all hoses for kinks, and fitting for leaks. • 4. Inspect bolts for obvious signs of looseness, including, but not necessary limited to the following areas: • A. Mast connector bolts. • B. Winch & motor mounts. • 5. Inspect pins and retainers for wear and looseness, including, but not necessarily limited to the following areas: • A. Tilt Cylinders. • B. Boom Pivot Pin. • C. Stick Pin. • D. Tilt Pin. • E. Top and Bottom Sheaves. • F. Upper Sheave Pins and Thrust Washers. • G. Lower Sheave Pin and Thrust Washers. • 6. Check slide poly material for proper operation and wear. • 7. Refer to upper winch service manuals for winch maintenance. • 8. Provide grease to lubrication points daily.

  6. RODRILL IMPACT MAST MAINTENANCE REQUIREMENTS WEEKLY INSPECTIONS 1. Perform all daily inspections items. 2. Provide grease and lubrication at points required. 3. Perform maintenance per winch service manuals. PRESSURE GAUGE PORTS GREASE POINTS CROWD/HOIST BRAKE ADJ.

  7. Hydraulic Connections AUX. WINCH HOIST WINCH CROWD WINCH

  8. Hydraulic Connections WINCH BRAKE ADJ. VALVES VIBRO / STICK CYLINDER SELECTOR

  9. Hydraulic Connections SELD MANIFOLD / VIBRO CONNECTIONS TILT CYLINDER / WINCH SELECTOR WINCH MANIFOLD

  10. Hydraulic Connections MANUAL WINCH BRAKE RELEASES VIBRO AND WINCH FLOW CONTROL (Consult Mfg. Prior to Adjustment)

  11. ADVANTAGES OF THIS SETUP • The cost is lower than that offered by competitors. • Low cost transportation. All components can be loaded into standard 40’ shipping containers. • Mast can be torn down or assembled on site in 2-3 days. • Low maintenance. • Very few spare parts needed.

  12. Recommended spare parts list • Upper sheaves, pins and washers. 1 • Sled sheaves, pins and washers. 1 • Crowd cable ¾’’ x 135 ft. 1 • Hoist cable ¾’’ x 225 ft. 1 • Auto dump bucket cable ½’’ x 175 ft. 1 • Auto dump bucket sheave pulleys, pins and washers. 1 • Spare crowd/hoist winch. 1 • Spare self loader winch. 1

  13. THE RODRILL COMPANY We thank you for your interest on our Impact Mast. Frank Rodriguez frank@rodrill.com Nathan Massey nathan@rodrill.com Randy Settlage randys@foundationequipment.biz RODRILL INC 11670 IH 10 East, Converse, TX 78109 Phone. (210) 667. 2130 Fax. (210) 667 . 9755 Web Page: www.rodrill.com American Pile Driving Equipment (APE) Kent, Washington Phone. (206) 369 . 2999 Website. www.apevibro.com

More Related