1 / 14

Extrusion Plant Safety

Extrusion Plant Safety. A Brief Review. Unsafe Acts. Safety experts say the vast majority of accidents are caused by UNSAFE ACTS. Unsafe Acts. Unsafe Acts. Keep workers alert Job training Safety training. Accident Reporting & Follow-Up.

trilby
Download Presentation

Extrusion Plant Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Extrusion Plant Safety A Brief Review

  2. Unsafe Acts • Safety experts say the vast majority of accidents are caused by UNSAFE ACTS

  3. Unsafe Acts

  4. Unsafe Acts • Keep workers alert • Job training • Safety training

  5. Accident Reporting & Follow-Up • Report every accident – even minor injuries and near misses • Investigate every one and take action to prevent recurrence • Serious accidents can’t be eliminated without eliminating the small ones

  6. Common Extrusion Hazards Tooling • Never extrude using cold or room temperature tools. • Never look into the exit end of a die when applying extrusion load. • Never use improperly supported dies, backers, and bolsters. • Always use safety devices and shields. • Caution - Many extrusion dies and support tools are subjected to stresses at or near the yield strength of the steel, allowing for little or no safety factor. Always adhere to rigid safety practices. • Never use a bad eye bolt for lifting a die, and always make sure the eye bolt is screwed in at least 4 or 5 full turns. • Beware of fire when applying lubricants (wax or grease) to hot dies and tooling.

  7. Common Extrusion Hazards Heat • The temperatures at which aluminum is extruded are very hazardous to human contact, but the outward appearance of the metal gives no warning when it is hot. • Certain steel parts of the press and tooling also present similar high temperature hazards, particularly tooling just removed from the press. • Any exposed personnel, especially visitors to the press area, must be properly instructed in avoiding hot materials; and procedures should be instituted to help avoid accidental contact.

  8. Common Extrusion Hazards Fire • The potential for fire around extrusion presses exists since most presses use mineral oil hydraulic systems at relatively high pressures. • These hydraulic fluids are extremely flammable if atomized by a leak in a pipe, hose or fitting. • Since the extrusion process is a thermal process, there are many sources of ignition. • Several deaths have been associated with fires on extrusion presses.

  9. Common Extrusion Hazards Lifting • Before lifting, make sure your path is dry and clear of objects that could cause a fall. • Bend your knees and keep your back straight. (Lift with your legs, not your back.) • Bring the load close to your body. • Lift in a slow, even motion. • Don't twist your body. If you must turn, move your feet. • Keep your back straight when putting down the load.

  10. Common Extrusion Hazards Material Handling • Cranes & forklifts Extrusion Equipment • Guarding & safety switches & light curtains Lockout/Tagout Procedures

  11. Personal Protective Equipment • Eye protection • Hearing protection • Steel toe shoes • Hard hats • Safety vest • Metatarsal shoes • Gloves (special applications) • Back support belt (some lifting jobs)

More Related