1 / 9

Autonomous On-Wafer Sensor Arrays

Autonomous On-Wafer Sensor Arrays. SFR Workshop November 8, 1999 Mason Freed, Kameshwar Poolla, and Costas Spanos Berkeley, CA.

trinh
Download Presentation

Autonomous On-Wafer Sensor Arrays

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Autonomous On-Wafer Sensor Arrays SFR Workshop November 8, 1999 Mason Freed, Kameshwar Poolla, and Costas Spanos Berkeley, CA This project involves the incorporation of sensors, a communication system, and a power supply onto a standard silicon wafer, for the purpose of supplying wafer-state information during a process step.

  2. Overview • Motivation • Certain wafer-state variables are difficult or destructive to measure, and many are impossible to measure in real-time • Add-on in-situ measurement devices are costly and cumbersome • Proposal: distributed sensor array on a wafer

  3. I I Poly-Si V Test-Case: Etch Rate • Polysilicon etch rate sensors based on van der Pauw probe electrical film-thickness measurement: • Use wired connections for power and communications • Initial testing in XeF2, an isotropic, gaseous etchant • No problem making connections to wafer • No electrical or physical isolation necessary

  4. Design #1 • Connections made using “edge-board” connector: Sensors Edge-board connector

  5. Results (Design #1) • Eleven etch cycles performed, interferometric thickness measurements made between each cycle. • Repeatability:  12.89 Å • Accuracy:  45.9 Å • Stability: 3.2 Å drift in 15 minutes.

  6. Design #2 Temperature-referenced Sensors Surface mount multiplexers Edge-board pads

  7. Results (Design #2) • Preliminary test of a single sensor only, during etch

  8. Progress vs Milestones Year 1 • Demonstrate tethered, real-time etch-rate measurements in chemical, non-plasma etch. (Done) Year 2 • Demonstrate un-tethered real-time measurements with integrated power and data processing. (Work in progress)

  9. Future Work Next Year • Conduct testing of new sensor design. • Research isolation schemes to allow operation in plasma conditions. • Work on integrating power and communications modules onto sensor wafer, for wireless operation. 2000-2002 • Develop additional integrated sensors for plasma. • Develop sensors for other processes (DUV resist processing, Rapid Thermal Processing steps.)

More Related