1 / 15

Hoop House Construction

Hoop House Construction. Parts of the hoop house. Frame Hoops Braces Plastic cover. Materials and Tools. 2”x4”x8’ (2) 2”x4”x4’ (2) 1”x2”x8’ (3) Nails (16d) Screws (1”) 2” Corner braces (4) ½” Sch 40 PVC Pipe, 10’ (4) ¾” Pipe straps (8) 10’x20’ Clear plastic sheeting Staples

trory
Download Presentation

Hoop House Construction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Hoop House Construction

  2. Parts of the hoop house • Frame • Hoops • Braces • Plastic cover

  3. Materialsand Tools • 2”x4”x8’ (2) • 2”x4”x4’ (2) • 1”x2”x8’ (3) • Nails (16d) • Screws (1”) • 2” Corner braces (4) • ½” Sch 40 PVC Pipe, 10’ (4) • ¾” Pipe straps (8) • 10’x20’ Clear plastic sheeting • Staples • Wrench ¼” bolts. 2½” long (12) ¼” nuts (12) Washers (12) Tape measure ¼” drill bit Hammer Drill Utility knife Staple gun Duct tape, clear

  4. The 2x4 Frame Build on flat, level ground. Line up 2x4’s so they are square

  5. Corner braces and screws on inside corners 2x4 Frame Nails first on outside corners

  6. Hoops • Screw 4 pipe straps on inside of each long 2x4 • One at each end and at 32” and 64” • Loop the PVC pipes between opposite straps

  7. Hoops

  8. Braces

  9. Braces • Measure the distance between outside ends of the PVC hoops • Cut the 1x2’s to this length. It will be a few inches less than 8’. • Drill ¼” holes to line up with 4 hoops

  10. Braces • Drill holes in PVC to line up with braces • A brace across the top • A brace on each side 32” up • Connect with bolts, nuts, and washers

  11. Braces

  12. Plastic Cover

  13. Plastic Cover

  14. Plastic Cover Staple to frame and braces Cover staples with duct tape

  15. Seal one end, maybe both

More Related