1 / 10

RF Reconfiguration and Testing

RF Reconfiguration and Testing. Rashad Ramzan and Jerzy Dabrowski Linköping University Dept. of Electrical Engineering SE-581 83 Linköping, Sweden. Outline. Testable LNA RF-DC Detector Offset-Loopback Summary, Future Planes. Recent Chip: RF Sampling Frontend.

troy-hays
Download Presentation

RF Reconfiguration and Testing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RF Reconfiguration and Testing Rashad Ramzan and Jerzy Dabrowski Linköping University Dept. of Electrical Engineering SE-581 83 Linköping, Sweden

  2. Outline • Testable LNA • RF-DC Detector • Offset-Loopback • Summary, Future Planes

  3. Recent Chip: RF Sampling Frontend • A 1.4V, 25mW Wideband Testable LNA in 0.13m CMOS

  4. Recent Chip: RF Sampling Frontend

  5. Resent Chip: RF Sampling Frontend • Due to “PCB” we are not able to measure NF at high frequencies? • Traces are not even. • FR4 not good for >1GHz • Connector Pad parasitics & impedance discontinuities • Remedy: We are working on it …….. • New PCB with Rogers not FR4 or Thin Film Technology • TRL calibration

  6. RF Testing- RF to DC Detector • Idea! Only from DC measurements. • All catastrophic faults can be detected. • Some of parametric faults. • Performance parameter like Gain, 1dB CP • And may be NF & IP3 • Calibration of Detectors with DC/Low voltage signals only

  7. R e c e i v e r (zero-IF) Base Band Processor LPF ADC LNA TA Test xtest Q I I Q I Q LO DAC 900 LPF IQ offset mixer Amp T r a n s m i t t e r IQ test signal QPSK is the simplest implementation but others can be used as well RF Testing- Offset Loopback • Test setup using IQ offset mixer for shared LO Tx band Rx band f fTx fRx f

  8.  =160 RF Testing- Offset Loopback • Test setup using IQ offset mixer for shared LO Tx I Rx I Tx Q  =160  =50 (skew) Rx Q

  9. Future Planes • New board for complete Chip measurements. • Test for Transceivers with polar modulator (shared LO) multistandard Transceivers. (with Phillips) • On-Chip phase noise measurements

More Related