1 / 28

Harman Handgrip on Digger Lever

Harman Handgrip on Digger Lever. Tracks and Chain painted. The right side as completed. She finally has a new seat. Hear she is and she is looking good.

urban
Download Presentation

Harman Handgrip on Digger Lever

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Harman Handgrip on Digger Lever

  2. Tracks and Chain painted

  3. The right side as completed

  4. She finally has a new seat

  5. Hear she is and she is looking good

  6. The new muffler constructionI Went to Harvey Briggs Welding & Radiator shop located in Charlestown/ Ranson, West Virginia and bought some pieces of metal and I cut out the pieces with the plasma cutter

  7. I first cut a square piece of metal and welded it into the center of the 5 inch pipe

  8. I next took a slug (END PIECE) and fitted it inside

  9. I next tacked the coupling to the end plate and left a good inch inside between the end of the coupling and the baffle plate

  10. I screwed in the piece pf pipe to keep welding slag off the inside threads of the coupling

  11. I next welded the inlet end in real good

  12. Here I have welded the outlet pipe to the end plate and chucked it into the lathe so as to hit it with a hammer and get it somewhat inline (TRUED it UP)

  13. I have it trued up and welded but good now to spin her around and make a final good looking heavy duty muffler

  14. You would be surprised what a good ole country boy can do with a little time on his hands

  15. Another look at a 3 hour muffler

  16. I am not going to screw it on yetI am going over to Briggs’ and see if it passes his ok( Come on Harvey give it the once over)

  17. Here she is painted and with NEW DECALS

  18. Grilles were a real piece of workHarvey Briggs helped once again as he supplied the metal to make the bending jig to form the bends on the grilles

  19. Panel has a new volt meter now as of Saturday the 21st. Of March

  20. Hood hammered out somewhatGrilles missing

  21. Seat metal was straightened and primed

  22. This thing was a sick puppy when I Found her

  23. Rear was smashed into the gearbox used skid loader, chain and torch to get back loose from gearbox

  24. Replaced 3 drive belts and the alternator belt

  25. There is the Wisconsin motorIt had a stuck exaust valve so the motor was repaired first

  26. Digging chain is in poor shape and I am looking for a used one

  27. This is the endhit your back button to get back to the website

More Related