1 / 40

Measurements of CsI(Tl) Crystals with PMT and APD Jean Peyré Milano - Oct 2006

Measurements of CsI(Tl) Crystals with PMT and APD Jean Peyré Milano - Oct 2006. 1.Characteristics of CsI( Tl ), PMT and APD 2.Measurements on CsI( Tl ). CsI (Tl) /Teflon + XP5300B 137 Cs CsI (Tl) /VM2000 + XP5300B 137 Cs CsI ( Tl ) + XP1912 137 Cs CsI ( Tl ) + APD S8664-1010 137 Cs

urban
Download Presentation

Measurements of CsI(Tl) Crystals with PMT and APD Jean Peyré Milano - Oct 2006

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Measurements of CsI(Tl) Crystals with PMT and APDJean PeyréMilano - Oct 2006 IPNO-RDD-Jean Peyré

  2. 1.Characteristics of CsI(Tl), PMT and APD2.Measurements on CsI(Tl) • CsI(Tl) /Teflon + XP5300B 137Cs • CsI(Tl) /VM2000 + XP5300B 137Cs • CsI(Tl)+ XP1912 137Cs • CsI(Tl)+ APD S8664-1010 137Cs • CsI(Tl)+ APD S8664-1010 137Cs+56Co+60Co • CsI(Tl)+ XP1912 137Cs+56Co+60Co 3.Conclusions IPNO-RDD-Jean Peyré

  3. 1.Characteristics of CsI(Tl), PMT and APD2.Measurements on CsI(Tl) • CsI(Tl) /Teflon + XP5300B 137Cs • CsI(Tl) /VM2000 + XP5300B 137Cs • CsI(Tl) + XP1912 137Cs • CsI(Tl) + APD S8664-1010 137Cs • CsI(Tl) + APD S8664-1010 137Cs+56Co+60Co • CsI(Tl) + XP1912 137Cs+56Co+60Co 3.Conclusions IPNO-RDD-Jean Peyré

  4. What we have got • 4 CsI(Tl) crystals from Saint-Gobain • PM tubes from Photonis (XP1912 and XP5300B) • APD from Panda APD S8664-1010 (Hamamatsu) PMT CsI(Tl) Crystals APD S8664-1010 IPNO-RDD-Jean Peyré

  5. CsI(Tl) Crystals • 4 Sizes: 22x22x22 mm3, 22x22x220 mm3, 44x22x200 mm3, 66x22x200 mm3, wrapped with Teflon polished only on exit face, rough on others. 44x22x200mm3 22x22x220mm3 66x22x200mm3 22x22x22mm3 CsI(Tl) Crystals IPNO-RDD-Jean Peyré

  6. Typical emission spectra of CsI(Tl) • Light yield (54 000 photons / MeV) Max emission = 550nm IPNO-RDD-Jean Peyré

  7. Photonis PMT PMT: • XP1912  Ø 19 mm (Active area 176mm2), bialkaly • XP5300B  Ø 76 mm, green extended bialkaly • Quantum efficiency • XP1912 28% at 420nm, 14% at 550nm • XP5300B 34% at 420nm, 24% at 550nm XP1912 XP5300B IPNO-RDD-Jean Peyré

  8. Typical Spectral Characteristics of PMT PMT: XP5300B ~x2 Arbitrary vertical value for CsI(Tl) CsI(Tl) XP1912 IPNO-RDD-Jean Peyré

  9. Typical Spectral Characteristics of Hamamatsu Panda APD APD: • APD from Panda APD S8664-1010 (Hamamatsu) • Active area 100mm2 Quantum efficiency 70% at 420nm, 85% at 550nm CsI(Tl) Arbitrary vertical value for CsI(Tl) APD S8664-1010 IPNO-RDD-Jean Peyré

  10. Resolution you can obtain with CsI(Tl) With PMT: R: global resolution RS: scintillator resolution (~4%)* RM: Photomultiplier resolution** *Ref: [1], [3], [4], [5], **Ref: [1], [2], [3] v(M): variance of the PMT gain (~0,1) N: Number of photoelectrons IPNO-RDD-Jean Peyré

  11. Resolution you can obtain with CsI(Tl) With APD: R: global resolution* ΔN/Ne-h: statistical fluctuation of the APD gain Δnoise/Ne-h : Noise contribution (dark noise) *Ref: [4] F: excess noise factor Ne-h: Number of primary electron-hole pairs IPNO-RDD-Jean Peyré

  12. Resolution you can obtain with CsI(Tl) With APD: For F=2 and noise 40 e-RMS (shaping time 3uS): IPNO-RDD-Jean Peyré

  13. 1.Characteristics of CsI(Tl), PMT and APD2.Measurements on CsI(Tl) Characterisation of CsI(Tl) • CsI(Tl) /Teflon + XP5300B 137Cs • CsI(Tl) /VM2000 + XP5300B 137Cs • CsI(Tl) + XP1912 137Cs • CsI(Tl) + APD S8664-1010 137Cs • CsI(Tl) + APD S8664-1010 137Cs+56Co+60Co • CsI(Tl) + XP1912 137Cs+56Co+60Co 3.Conclusions IPNO-RDD-Jean Peyré

  14. Experimental setup Source Wooden black box Lead collimator Photomultiplier XP5300B Crystal Translation of source Source Lead collimator IPNO-RDD-Jean Peyré

  15. Experimental setup Crystal wrapped with Teflon Photomultiplier XP5300B IPNO-RDD-Jean Peyré

  16. Experimental setup PMT XP5300B has 8 stages. Charge preamplifier connected to 5th stage Cf= 24 pF, Shaping time 3 μs Cf XP5300B Light emission Charge preamplifier + Shaper + ADC + Data Acquisition on PC γ rays IPNO-RDD-Jean Peyré

  17. 137Cs peak at 662 keV 0,662 MeV 137Cs peak Compton Edge IPNO-RDD-Jean Peyré

  18. Results CsI(Tl)+Teflon+XP5300B+137Cs Resolution FWHM Collected light for 137Cs peak VS position of impact • RS=5,5%±0,2 except for crystal 22x22x220: RS~7% • Global Resolution is quite constant along the Crystal • Variation from 14% to 38% of collected light along the Crystal IPNO-RDD-Jean Peyré

  19. 1.Characteristics of CsI(Tl), PMT and APD2.Measurements on CsI(Tl) Characterisation of CsI(Tl) • CsI(Tl) /Teflon + XP5300B 137Cs • CsI(Tl) /VM2000 + XP5300B 137Cs • CsI(Tl) + XP1912 137Cs • CsI(Tl) + APD S8664-1010 137Cs • CsI(Tl) + APD S8664-1010 137Cs+56Co+60Co • CsI(Tl) + XP1912 137Cs+56Co+60Co 3.Conclusions IPNO-RDD-Jean Peyré

  20. Experimental setup Crystal wrapped with VM2000 IPNO-RDD-Jean Peyré

  21. Results CsI(Tl)+VM2000+XP5300B+137Cs Collected light for 137Cs peak VS position of impact Resolution FWHM • RS=4,7%±0,1 for cube and 44x22x200, RS=5,6%±0,1for 22x22x220 & 66x22x200 • Global Resolution is quite constant along the Crystal • Variation from 7% to 20% of collected light along the Crystal IPNO-RDD-Jean Peyré

  22. Results CsI(Tl)+XP5300B+137Cs Collected light for 137Cs peak VS position of impact • VM2000 chosen for all next tests • Problem with 22x22x22O CsI(Tl) crystal IPNO-RDD-Jean Peyré

  23. 1.Characteristics of CsI(Tl), PMT and APD2.Measurements on CsI(Tl) • CsI(Tl) /Teflon + XP5300B 137Cs • CsI(Tl) /VM2000 + XP5300B 137Cs • CsI(Tl) + XP1912 137Cs • CsI(Tl) + APD S8664-1010 137Cs • CsI(Tl) + APD S8664-1010 137Cs+56Co+60Co • CsI(Tl) + XP1912 137Cs+56Co+60Co Tests with small light detectors 3.Conclusions IPNO-RDD-Jean Peyré

  24. Experimental setup Output face closed and adapted to XP1912 Crystal wrapped with VM2000 IPNO-RDD-Jean Peyré

  25. Results CsI(Tl)+VM2000+XP1912+137Cs Resolution FWHM Collected light for 137Cs peak VS position of impact • RS=5%±0,1 for cube • Variation from 7% to 14% of collected light along the Crystal • Resolution is quite constant along the Crystal IPNO-RDD-Jean Peyré

  26. Results for PMT/VM2000+137Cs Collected light for 137Cs peak VS position of impact IPNO-RDD-Jean Peyré

  27. 1.Characteristics of CsI(Tl), PMT and APD2.Measurements on CsI(Tl) • CsI(Tl) /Teflon + XP5300B 137Cs • CsI(Tl) /VM2000 + XP5300B 137Cs • CsI(Tl) + XP1912 137Cs • CsI(Tl) + APD S8664-1010 137Cs • CsI(Tl) + APD S8664-1010 137Cs+56Co+60Co • CsI(Tl) + XP1912 137Cs+56Co+60Co Tests with small light detectors 3.Conclusions IPNO-RDD-Jean Peyré

  28. Experimental setup APD used at Gain 50 and 380V. Cf= 0,5 pF, Shaping time 3 μs Cf Light emission Charge preamplifier + Shaper + ADC + Data Acquisition on PC γ rays IPNO-RDD-Jean Peyré

  29. Results CsI(Tl)+VM2000+APD+137Cs Resolution FWHM Collected light for 137Cs peak VS position of impact • RS=4,5%±0,1 • Global Resolution is quite constant along the Crystal except close to the APD IPNO-RDD-Jean Peyré

  30. 22x22x22 22x22x220 44x22x200 66x22x200 XP5300B 5,74% 6,70% 5,86% 6,57% APD S8664-1010 8,23% 9,39% XP1912 8,05% 9,40% 10,33% 12,28% Resolutions CsI(Tl)+VM2000+APD/PMT+137Cs IPNO-RDD-Jean Peyré

  31. 1.Characteristics of CsI(Tl), PMT and APD2.Measurements on CsI(Tl) • CsI(Tl) /Teflon + XP5300B 137Cs • CsI(Tl) /VM2000 + XP5300B 137Cs • CsI(Tl) + XP1912 137Cs • CsI(Tl) + APD S8664-1010 137Cs • CsI(Tl) + XP1912 137Cs+56Co+60Co • CsI(Tl) + APD S8664-1010 137Cs+56Co+60Co Tests with small light detectors 3.Conclusions IPNO-RDD-Jean Peyré

  32. 60Co peaks 1.17 MeV 1.33 MeV 60Co peaks IPNO-RDD-Jean Peyré

  33. 0,85 MeV 56Co peaks 1.24 MeV 2,59 MeV 3,25 MeV 56Co peaks IPNO-RDD-Jean Peyré

  34. Resolutions CsI(Tl)+VM2000+XP1912+137Cs+60Co+56Co Collected light for 137Cs,60Co, 56Copeaks VS position of impact calculated (5,35%) measured Resolution FWHM (6,71%) (9,29%) Rscint =4% IPNO-RDD-Jean Peyré

  35. Results CsI(Tl)+VM2000+APD+137Cs+60Co+56Co Collected light for 137Cs,60Co, 56Copeaks VS position of impact (5,13%) (6,82%) (9,00%) Rscint =4% IPNO-RDD-Jean Peyré

  36. 1.Characteristics of CsI(Tl), PMT and APD2.Measurements on CsI(Tl) • CsI(Tl) /Teflon + XP5300B 137Cs • CsI(Tl) /VM2000 + XP5300B 137Cs • CsI(Tl) + XP1912 137Cs • CsI(Tl) + APD S8664-1010 137Cs • CsI(Tl) + XP1912 137Cs+56Co+60Co • CsI(Tl) + APD S8664-1010 137Cs+56Co+60Co 3.Conclusions IPNO-RDD-Jean Peyré

  37. Use of XP1452 foreseen • XP1452  38 mm (Active area 4x272mm2), green extended bialkaly • Quantum efficiency 34% at 420nm, 24% at 550nm • Size from 35mm to 50mm Next tests with XP1452 XP1452 IPNO-RDD-Jean Peyré

  38. Conclusions Calculated Resolutions Xtal 22x22x220 @550nm IPNO-RDD-Jean Peyré

  39. Conclusions • Collected light through long crystals is not constant. Tests with non collimated 137Cs source give resolutions greater that 15%. • The choice of VM2000 seems obvious • With XP1912, it seems difficult to have a resolution better than 9%-10% at 662keV on long crystals because: • Area covered by PMT is only 36% with 22x22 output face • Intrinsic resolution of crystal is quite high (~4/5%) • Photocathode is not green extended bialkaly • Resolution obtained with PMT XP1912 and APD are quite comparable until 3.25MeV • No work has been done on surface quality (polished/rough) • Use of XP1452 seems promising • Tests on LaCl3 crystal IPNO-RDD-Jean Peyré

  40. Many Thanks to all participants IPNO-RDD-Jean Peyré

More Related