1 / 57

Geodesy, Map Projections and Coordinate Systems

Geodesy, Map Projections and Coordinate Systems. Geodesy - the shape of the earth and definition of earth datums Map Projection - the transformation of a curved earth to a flat map Coordinate systems - (x,y,z) coordinate systems for map data.

uyen
Download Presentation

Geodesy, Map Projections and Coordinate Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Geodesy, Map Projections and Coordinate Systems • Geodesy - the shape of the earth and definition of earth datums • Map Projection - the transformation of a curved earth to a flat map • Coordinate systems - (x,y,z) coordinate systems for map data

  2. Learning Objectives:By the end of this class you should know: • the role of geodesy as a basis for earth datums • how to calculate distances on a spherical earth • the basic types of map projection • the properties of common map projections • the terminology of common coordinate systems • how to use ArcGIS to convert between coordinate systems

  3. Spatial Reference = Datum + Projection + Coordinate system • For consistent analysis the spatial reference of data sets should be the same. • ArcGIS does projection on the fly so can display data with different spatial references properly if they are properly specified. • ArcGIS terminology • Define projection. Specify the projection for some data without changing the data. • Project. Change the data from one projection to another.

  4. Types of Coordinate Systems • (1) Global Cartesian coordinates (x,y,z) for the whole earth • (2) Geographic coordinates (f, l, z) • (3) Projected coordinates (x, y, z) on a local area of the earth’s surface • The z-coordinate in (1) and (3) is defined geometrically; in (2) the z-coordinate is defined gravitationally

  5. Z Greenwich Meridian O • Y X Equator Global Cartesian Coordinates (x,y,z)

  6. Global Positioning System (GPS) • 24 satellites in orbit around the earth • Each satellite is continuously radiating a signal at speed of light, c • GPS receiver measures time lapse, Dt, since signal left the satellite, Dr = cDt • Position obtained by intersection of radial distances, Dr, from each satellite • Differential correction improves accuracy

  7. Global Positioning using Satellites Dr2 Dr3 Number of Satellites 1 2 3 4 Object Defined Sphere Circle Two Points Single Point Dr4 Dr1

  8. Geographic Coordinates (f, l, z) • Latitude (f) and Longitude (l) defined using an ellipsoid, an ellipse rotated about an axis • Elevation (z) defined using geoid, a surface of constant gravitational potential • Earth datums define standard values of the ellipsoid and geoid

  9. Shape of the Earth It is actually a spheroid, slightly larger in radius at the equator than at the poles We think of the earth as a sphere

  10. Ellipse An ellipse is defined by: Focal length =  Distance (F1, P, F2) is constant for all points on ellipse When  = 0, ellipse = circle Z b O a X   F1 F2 For the earth: Major axis, a = 6378 km Minor axis, b = 6357 km Flattening ratio, f = (a-b)/a ~ 1/300 P

  11. Ellipsoid or SpheroidRotate an ellipse around an axis Z b a O Y a X Rotational axis

  12. Standard Ellipsoids Ref: Snyder, Map Projections, A working manual, USGS Professional Paper 1395, p.12

  13. Horizontal Earth Datums • An earth datum is defined by an ellipse and an axis of rotation • NAD27 (North American Datum of 1927) uses the Clarke (1866) ellipsoid on a non geocentric axis of rotation • NAD83 (NAD,1983) uses the GRS80 ellipsoid on a geocentric axis of rotation • WGS84 (World Geodetic System of 1984) uses GRS80, almost the same as NAD83

  14. Definition of Latitude, f m p S n O f q r (1) Take a point S on the surface of the ellipsoid and define there the tangent plane, mn (2) Define the line pq through S and normal to the tangent plane (3) Angle pqr which this line makes with the equatorial plane is the latitude f, of point S

  15. P Prime Meridian Equator Meridian plane Cutting Plane of a Meridian

  16. Definition of Longitude, l l = the angle between a cutting plane on the prime meridian and the cutting plane on the meridian through the point, P 180°E, W -150° 150° -120° 120° 90°W (-90 °) 90°E (+90 °) P -60° l -60° -30° 30° 0°E, W

  17. =0-180°W =0-90°S Latitude and Longitude on a Sphere Meridian of longitude Z Greenwich meridian N Parallel of latitude =0° P • =0-90°N  - Geographic longitude  - Geographic latitude  E W O • Y R  R - Mean earth radius • =0° Equator  • O - Geocenter =0-180°E X

  18. Length on Meridians and Parallels (Lat, Long) = (f, l) Length on a Meridian: AB = ReDf (same for all latitudes) R Dl D R 30 N C B Re Df 0 N Re Length on a Parallel: CD = R Dl = ReDl Cos f (varies with latitude) A

  19. Example: What is the length of a 1º increment along • on a meridian and on a parallel at 30N, 90W? • Radius of the earth = 6370 km. • Solution: • A 1º angle has first to be converted to radians • p radians = 180 º, so 1º = p/180 = 3.1416/180 = 0.0175 radians • For the meridian, DL = ReDf = 6370 * 0.0175 = 111 km • For the parallel, DL = ReDl Cos f • = 6370 * 0.0175 * Cos 30 • = 96.5 km • Parallels converge as poles are approached

  20. Z B A  • Y X Curved Earth Distance(from A to B) Shortest distance is along a “Great Circle” A “Great Circle” is the intersection of a sphere with a plane going through its center. 1. Spherical coordinates converted to Cartesian coordinates. 2. Vector dot product used to calculate angle  from latitude and longitude 3. Great circle distance is R, where R=6370 km2 Longley et al. (2001)

  21. Sea surface Ellipsoid Earth surface Geoid Representations of the Earth Mean Sea Level is a surface of constant gravitational potential called the Geoid

  22. Geoid and Ellipsoid Earth surface Ellipsoid Ocean Geoid Gravity Anomaly Gravity anomaly is the elevation difference between a standard shape of the earth (ellipsoid) and a surface of constant gravitational potential (geoid)

  23. Definition of Elevation Elevation Z P z = zp • Land Surface z = 0 Mean Sea level = Geoid Elevation is measured from the Geoid

  24. http://www.csr.utexas.edu/ocean/mss.html

  25. Vertical Earth Datums • A vertical datum defines elevation, z • NGVD29 (National Geodetic Vertical Datum of 1929) • NAVD88 (North American Vertical Datum of 1988) • takes into account a map of gravity anomalies between the ellipsoid and the geoid

  26. Converting Vertical Datums • Corps program Corpscon (not in ArcInfo) • http://crunch.tec.army.mil/software/corpscon/corpscon.html Point file attributed with the elevation difference between NGVD 29 and NAVD 88 NGVD 29 terrain + adjustment = NAVD 88 terrain elevation

  27. Geodesy and Map Projections • Geodesy - the shape of the earth and definition of earth datums • Map Projection - the transformation of a curved earth to a flat map • Coordinate systems - (x,y) coordinate systems for map data

  28. Representative Fraction Globe distanceEarth distance = Earth to Globe to Map Map Projection: Map Scale: Scale Factor Map distanceGlobe distance = (e.g. 0.9996) (e.g. 1:24,000)

  29. Geographic and Projected Coordinates (f, l) (x, y) Map Projection

  30. Types of Projections • Conic (Albers Equal Area, Lambert Conformal Conic) - good for East-West land areas • Cylindrical (Transverse Mercator) - good for North-South land areas • Azimuthal (Lambert Azimuthal Equal Area) - good for global views

  31. Conic Projections(Albers, Lambert)

  32. Cylindrical Projections(Mercator) Transverse Oblique

  33. Azimuthal (Lambert)

  34. Albers Equal Area Conic Projection

  35. Lambert Conformal Conic Projection

  36. Universal Transverse Mercator Projection

  37. Lambert Azimuthal Equal Area Projection

  38. Projections Preserve Some Earth Properties • Area - correct earth surface area (Albers Equal Area) important for mass balances • Shape - local angles are shown correctly (Lambert Conformal Conic) • Direction - all directions are shown correctly relative to the center (Lambert Azimuthal Equal Area) • Distance - preserved along particular lines • Some projections preserve two properties

  39. Projection and Datum Two datasets can differ in both the projection and the datum, so it is important to know both for every dataset.

  40. Geodesy and Map Projections • Geodesy - the shape of the earth and definition of earth datums • Map Projection - the transformation of a curved earth to a flat map • Coordinate systems - (x,y) coordinate systems for map data

  41. Coordinate Systems • Universal Transverse Mercator (UTM) - a global system developed by the US Military Services • State Plane Coordinate System - civilian system for defining legal boundaries • Texas Centric Mapping System - a statewide coordinate system for Texas

  42. Coordinate System A planar coordinate system is defined by a pair of orthogonal (x,y) axes drawn through an origin Y X Origin (xo,yo) (fo,lo)

  43. Universal Transverse Mercator • Uses the Transverse Mercator projection • Each zone has a Central Meridian(lo), zones are 6° wide, and go from pole to pole • 60 zones cover the earth from East to West • Reference Latitude (fo), is the equator • (Xshift, Yshift) = (xo,yo) = (500000, 0) in the Northern Hemisphere, units are meters

  44. UTM Zone 14 -99° -102° -96° 6° Origin Equator -90 ° -120° -60 °

  45. State Plane Coordinate System • Defined for each State in the United States • East-West States (e.g. Texas) use Lambert Conformal Conic, North-South States (e.g. California) use Transverse Mercator • Texas has five zones (North, North Central, Central, South Central, South) to give accurate representation • Greatest accuracy for local measurements

  46. Texas Centric Mapping System • Designed to give State-wide coverage of Texas without gaps • Lambert Conformal Conic projection with standard parallels 1/6 from the top and 1/6 from bottom of the State • Adapted to Albers equal area projection for working in hydrology

  47. Defined for a feature dataset in ArcCatalog XY Coordinate System Projected Geographic Z Coordinate system Tolerance Resolution M Domain ArcGIS Reference Frames

  48. Geographic coordinates (decimal degrees) Projected coordinates (length units, ft or meters) Horizontal Coordinate Systems

  49. None for 2D data Necessary for 3D data Vertical Coordinate Systems

  50. The default XY tolerance is the equivalent of 1mm (0.001 meters) in the linear unit of the data's XY (horizontal) coordinate system on the earth surface at the center of the coordinate system. For example, if your coordinate system is recorded in feet, the default value is 0.003281 feet (0.03937 inches). If coordinates are in latitude-longitude, the default XY tolerance is 0.0000000556 degrees. Tolerance

More Related