1 / 10

LS-DYNA geometry for the DRDC experiment.

LS-DYNA geometry for the DRDC experiment. 10 metric ton ring to simulate vehicle mass. Steel Support Frame. SPH C4 Charge 5 cm DOB 8 cm thick 12.5 cm radius 6.2 kg. Al 5083 plate 3.175 cm thick. *Test performed by Defence R&D Canada, Williams et. Al. SPH simulation of DRDC experiment.

vanna-clayton
Download Presentation

LS-DYNA geometry for the DRDC experiment.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LS-DYNA geometry for the DRDC experiment. 10 metric ton ring to simulate vehicle mass Steel Support Frame SPH C4 Charge5 cm DOB8 cm thick12.5 cm radius6.2 kg Al 5083 plate3.175 cm thick *Test performed by Defence R&D Canada, Williams et. Al.

  2. SPH simulation of DRDC experiment. Measured displacements: 30.0 cm center, -5.0 cm at edge.

  3. ALE simulation of DRDC experiment. Soil Contours

  4. DRDC plate deformation calculated from the LS-DYNA SPH simulation. Measured displacements: 30.0 cm center, -5.0 cm at edge.

  5. DRDC plate deformation calculated from the LS-DYNA ALE simulation. ~25 ± 2cm, depending on soil compaction compared to 30 cm measured.

  6. Model geometry for the dynamic shell buckling airblast analysis. Planar pressureload ALE air Steel plugs(constrained translation) Aluminum shell(tied to plugs)

  7. Air Blast Analysis Results Test* Calculation • *Photo from Lindberg and Florence, “Dynamic Pulse Buckling,” 1987

  8. Model geometry for vehicle blast simulation.

  9. Contours of pressure during blast-vehicle interaction. (a) t = 0.1 ms (b) t = 1.1 ms (c) t = 4.4 ms

  10. Damage to vehicle at 13.0 ms. Vehicle Damage

More Related