1 / 19

Lenel Onguard on Crystal

Lenel Onguard on Crystal. Overview. Plugin Installation Metadata Source Configuration Bridge Configuration Metadata Channel Configuration Filter Import Remote Onguard Configuration requirement. Plugin Installation. Step : 1.Make sure Crystal server and Metadata Server is working.

vapplewhite
Download Presentation

Lenel Onguard on Crystal

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lenel Onguard on Crystal

  2. Overview • Plugin Installation • Metadata Source Configuration • Bridge Configuration • Metadata Channel Configuration • Filter Import • Remote Onguard Configuration requirement

  3. Plugin Installation • Step : • 1.Make sure Crystal server and Metadata Server is working. • 2. Download “NUUO _AC_Lenel OnGuard_Plugin .zip” from NUUO Website • 3.Go to Metadata Server > Plugin Overview (Configuration page ) • Upload “ACLenel_Crystal2.2_2.0.0.1_1850.nmp” to Metadata server

  4. Plugin Installation

  5. Plugin Installation • Notice : If there is the old version , please remove it before install the Plugin

  6. Plugin Installation • Notice : If there is the old version , please remove it before install the Plugin

  7. Metadata Source Configuration • Each Metadata source is corresponding to 1 Bridge , 1 Lenel OnGuard System 。 • PressMetadata Server，並點左下角的「+」按鈕，加入一個Lenel OnGuard 的 Metadata Source。

  8. Metadata Source Configuration • 進入此 Metadata Source 的 Properties 頁面，設定其欲開啟的 Port 號 (不可與他人衝突)

  9. Metadata Source Configuration • 點左上角的 Commit Config 圖示，令設定生效。

  10. Bridge Configuration • Step : • 1. 確認 Lenel OnGuard System 已正確運作。 • 2. 啟動 Bridge 程式。 • 3. 若為首次啟動，設定頁面應自動跳出；否則點 Settings 按鈕進入設定頁面。 • 4. 填妥 Lenel OnGuard System 的設定。 • 4-1. 若 Bridge 與 OnGurad 置於同一台電腦，點選 Local。 • 4-2. 若否，點選 Remote，並填入 OnGuard 所在主機的 IP，與該權限 Windows 使用者帳號名稱與密碼。

  11. Bridge Configuration • 注意！下列項目須先設定妥當：允許 WMI 通過 Windows 防火牆。 • Step : • 5. 填妥 NUUO Metadata Server 的 IP 與 Port 號。(該 Port 號即為先前於 Metadata Source 所設定者。) • 6. 按下 Apply 令設定生效，進入主畫面。 • 7. 檢查 Connection Status，Bridge 應已能正常運作。

  12. Metadata Channel Configuration • Metadata Channel 對應Lenel OnGuard System 的一個Device，舉例：Reader、Door、等。 • Step : • 1. 於 Bridge 主畫面，應能查詢到各 Device 之 Panel ID 與 Device ID。若無，可嘗試按「Refresh」更新清單。

  13. Metadata Channel Configuration • 2. 回到 Metadata Source，點左下角的「+」按鈕，加入一個 Metadata Channel。 • 3. 進入 Metadata Channel 的 Properties 頁面，填入感興趣的 Device 之 Panel ID 與 Device ID。

  14. Metadata Channel Configuration • 4. 重覆步驟 2 至 3，直到完成所有需要的 Device 的設定。 • 5. 點左上角的 Commit Config 圖示，令設定生效。

  15. Filter • Step: • 1. Download the “LenelDefaultFilter.ini “ from NUUO website and Upload manually (optional)

  16. Filter

  17. FAQ

  18. Remote Onguard Configuration requirement • 1) 允許 WMI 通過 Windows 防火牆 • 直接關閉防火牆， • 或參見以下連結「In Windows Firewall, ...」段落： • http://www.sitepoint.com/php-wmi-dig-deep-windows-php/ • 2) Query Device 成功，但 OnGuard 卻無法連上之排解 • 參見以下連結「To grant DCOM remote access permissions」部份： • http://msdn.microsoft.com/en-us/library/aa393266

  19. Thank you!

More Related