60 likes | 137 Views
Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [ TG 3c Channel Model Status Report ] Date Submitted: [ 16 Jan , 200 7 ] Source: [Su-Khiong Yong] Company [Samsung Advanced Institute of Technology (SAIT)]
E N D
Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [TG 3c Channel Model Status Report] Date Submitted: [16Jan, 2007] Source: [Su-Khiong Yong] Company [Samsung Advanced Institute of Technology (SAIT)] Address [P. O. Box 111, Suwon 440-600, Korea] Voice:[+82-31-280-9581], FAX: [+82-31-280-9555],E-Mail: [su.khiong.yong@samsung.com] Re : [Progress Report for TG3c Channel Model] Abstract: [] Purpose:[This document discusses the propagation issues and parameters for IEEE 802.15.3c] Notice :This document has been prepared to assist the IEEE P802.15. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release:The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P802.15. Su-Khiong Yong, Samsung-SAIT
TG3c Channel Model Status Report • Channel model document 06/195r5 has was approved in Dallas meeting (Nov 06) • A comment was received to include a antenna pattern of the reference antenna used in CMD. • 06/195r6 will be uploaded and will need to approve it. Su-Khiong Yong, Samsung-SAIT
TG3c CM Matlab Code Status Report • Latest CM release is 1.0 (06/527) was on the server • Merger of TSV engine and SV engine into a single package. • No specific comments/bugs have been reported so far for version 1.0 • 07/533r0 will discuss the latest CM release 1.0 Su-Khiong Yong, Samsung-SAIT
Open issue in Jan. 16 2007 and comments • CM1.5 is missing in the MATLAB code • The version 1.1 code includes the missing CM in the flow of TSV model. • How beam-width of RX antenna changes? • You can input the beam-width from Menu.m in Ver 1.1 code • Does the code do any limitation if power of ray before the multiplication by antenna gain is higher than free space loss + 6dB ? • No, the code does not use any limitation. • When changed beam-width of TX antenna, why the number of rays did not decrease ? • This is a channel model issue not MATLAB code issue • For CM2 and CM4, how to steer the direction of antenna • The direction to antenna is that to get maximum total power. Version 1.1 does not include the model. Next version will include it. The modified code will be released by Jan. 31 (in TSV flow) • In the version 1.1, the two antennas are faced to each other. • When Version 1.1 is released? • On Jan.16 the code will be released Su-Khiong Yong, Samsung-SAIT
Motion • Motion by S. K. Yong to approve the updated channel model document 06/195r6 subject to the condition that the HPBW of the antenna pattern is less than 80 degrees. Seconded by I. Lakkis. • Yes - 17 • No - 0 • Abstain – 8 • Motion passed Su-Khiong Yong, Samsung-SAIT
Motion • Motion by S. Kato to approve the Matlab Code Release 1.1 (07/566r0). Seconded by S. K. Yong. • Motion by J. Barr to postpone the motion until Thursday AM2. Seconded by E. Grass • Yes - • No - • Abstain - Su-Khiong Yong, Samsung-SAIT