1 / 12

LiDAR on the CDA Reservation Overview

LiDAR on the CDA Reservation Overview. James Twoteeth GIS Analyst. -Light Detection and Ranging. CDA Tribe Lidar Acquisition. Horizons Inc. out of South Dakota flew our lidar acquisition in February of 2005. Raw Lidar data 537 sq. miles 2.5 x 2.5 km tiles (257 tiles)

vasanti
Download Presentation

LiDAR on the CDA Reservation Overview

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. LiDAR on the CDA Reservation Overview James Twoteeth GIS Analyst

  2. -Light Detection and Ranging

  3. CDA Tribe Lidar Acquisition Horizons Inc. out of South Dakota flew our lidar acquisition in February of 2005. Raw Lidar data 537 sq. miles 2.5 x 2.5 km tiles (257 tiles) 8-10 million points per tile We are currently processing the raw Lidar data in house using tools that were developed by the Rocky Mountain Service Station in Moscow, Idaho which helped us to reduce the cost by about 50 %. Roughly $ 74,900 for raw lidar data for the CDA Tribe Reservation

  4. 2004 Color Ortho-Photo Hillshade created from DTM made from Lidar, Including vegetation. Hillshade created from DTM made from Lidar, excluding vegetation.(Bare earth hillshade)

  5. Lidar intensity values (measure of return signal strength) Hillshade overlaid with vegetation heights Hillshade created from Digital Terrain Model made from Lidar, overlaid with Color Ortho Photo

  6. Three-Dimensional view of project area using LiDAR as elevational model and then overlaid tat with color digital orthophoto using ArcGlobe.

  7. Next Steps for CDA Tribe Lidar • Get initial lidar processed to produce a bare earth, • DTM, Heights, and Intensity layers for reservation. • Connect with technical people (Eric, Jennifer) to • further research how to derive forest characteristics • from lidar to tie back to plot information like CFI, Firemon.

  8. Any Questions ????

More Related