Littleford Day Inc. Where Processing Ideas become Reality.

1. Littleford Day Inc. Where Processing Ideas become Reality.

2. Littleford Day Roll Mills 5” X 12” Model10” x 22” & 14 x 30” Models SPECIFICATIONS 5”x12” 10”x22” 14”x30” Roll Diameter 5” 10” 14” Roll Working Length 12” 22” 30” Speed-Apron Roll 158 RPM 300 RPM 300 RPM Speed-Middle Roll 81 RPM 150 RPM 142 RPM Speed-Feet Roll 32 RPM 59 RPM 57 RPM A - Overall Width 36” 60” 75” B - Overall Depth 27” 53” 70” C . Overall Height 45” 46” 57” D - Height to top of Rolls 41” 37” 49” E - Floor (or can rest)-Apron 14” 22” 30” F - Floor to can rest 19” --- --- Net Weight in Pounds 850 4,200 8,500 Domestic Shipping Weight 1,000 4,600 9,100 Drive Motor. HP 2 15 25/30/40 Drive Motor, RPM 230 900 900 Capacities * Lbs/Hr 50 350 700 A A F C D D E E B B Littleford Day Three Roll Mills Engineered for fine dispersions of all types of Printing Inks, Paints, Enamels, Lacquers, Colors in Varnish, Precipitates, Soaps, Ointments, Cho- colate, Plastic Colors and other Heavy Pastes. The Littleford Day Three Roll Dispersion Mill will help you produce a better product faster and at less cost. To insure dispersion of the highest quality, every component is des- igned for precise accuracy, maximum rigidity & ultra-smooth operation. To meet today´s high-speed production require- ments, all elements of the mill frame and drive are specially constructed to transmit the maximum amount of power with the least amount of vibration. * BASED ON HEAVY PASTE MIX (Aprox. 14 Lbs/Gal) USING AN AVERAGE DISPERSION FILM THICKNESS OF .0005”.

3. Littleford Day Roll Mills End Guides rest on Bevel Cooling Liquid Movable Roll FIXED Roll Movable Roll Movable Roll Movable Roll FIXED Roll Adjustable, Re- pleacable Bevel Scrappers Littleford Day Roll Mills Combined Rugged Strength & Precision Design For Ultra-Smooth Operation DIAL-A-GRIND Automatic roll setting with an easy & fast method of pressure selection, make our mills prod- uctive. Our “Dial-A-Grind” sys- tem assures accuracy, with a better grind & dispersion than with a hand-set mill. It is simple to operate- to set up & reset. It permits an operator to set his mill from a single location, assu- red that roll pull-up will be even & smooth. Instant release & reset is accomplished with a single switch. Apron pressure is contro- led from the same panel. HYDRAULIC ROLL SET A simple adjustment controls both roll position & pressure, hydraulically. The most advanced roll setting device on the market, it maintains continuously accurate roll settings, pro- viding finer dispersions & assuring extra production through reduced operarator adjustment time. Hydraulic pressure is used to actuate pistons, which in turn , control roll position and pressure. A diaphragm, located between the fluid & pis- ton prevents leakage of fluid thus assuring absolute const- ant roll pressure, uniformly high product quality. Intercon- nected cylinders at each end of the roll equalizes and bala- nced forces across the roll. All back roll cylinders have sa- fety rupture discs. Hydraulic roll setting is available as op- tional equipment on new mills, or as a field conversion kit for existing type B mills. HIGHEST QUALITY CHILLED ROLLS Cast from special electric furnace steel and chilled to provide hard, accurate surfaces. Our rolls give the highest grinding efficien- cy and long life. Chamber boring and thin walls insure uniform cooling over the entire roll surface and eliminate uneven expansion. Beveled design of roll end provides more usable roll area, hence more grinding area. Cooling is beyond the surface area. EFFICIENT END GUIDES Which confine product to the wor- king surfaces of the rolls. Made of bronze, the guides & replacement tips are precision bored & scrap- ed to perfectly fit the radius of the rolls. The hopper is formed by two steel plates between the end gui- des which lift out for easy clean- ing. Optional Lift-Type guides lift out vertically for quick clean up, and have an automatic reset feature which allows return to position without readjustment. A: FIXED CENTER ROLL CONVERTIBLE ROLLS All mills, except the 5” x 12” model are provided with rolls capable of being operated with a fixed center roll, or converted to Float - A - Roll operation in which center roll “ floats ” and all mill roll adjustments are made from one end of the mill Apron Roll Center Roll Feed Roll Replaceable Tip in Guide Plate B: FLOAT-A-ROLL

4. Littleford Day Roll Mills Precision Engineered For Top Production Of Highest Quality Dispersions. ROLL REGRINDING & MILL REBUIDING To keep roll mills performing at top production, rolls should be reground periodically to eliminate worn, pitted or gouged surfa- ces. Littleford Day mantains a complete roll regrinding facility, complete with the equipment and experienced personnel nece- ssary to insure the perfect performance of your reground rolls.. Every set of rolls received for grinding undergoes a thorough inspection. Rolls are checked for size and hardness; bearings gears and shafts for proper tolerances; and guides for leakage. Rolls are reground and, if necessary gears are recut, shafts sleeved and guides rebored. After reassembly every set of rolls is tested under operating conditions to insure perfect grinds. When trouble symptoms appear, such as improper dispersion, unusual vibration or operating noises, complete mill rebuild- ing may be required. In rebuiding your roll mill, the machine is completely dismantled. Each part is checked for wear or fracture , rolls are reground, gears recut, and the handwheel adjustment or hydraulic roll set device is thoroughly inspec- ted and adjusted. The motor is also carefully inspected, clea- ned and reconditioned. All parts are cleaned and every pain- ted surface completely refinished. RIGID FRAMES SELECTED BEARINGS SILENT GEARS RUGGED DRIVE SAFETY DEVICES KNIFE HOLDER ROLL TEMP. INDICATOR EASY ROLL ADJUSTMENT

5. Classification Straight Time Rate Overtime rates (Hourly) Daily Rate Of Service (Hourly) Time & One-Half Rate Double Time Rate (8) Hours Service Inspection $ 50.00 $ 75.00 $ 100.00 $ 400.00 Service Technician $ 65.00 $ 97.50 $ 130.00 $ 520.00 Service Engineer $ 80.00 $120.00 $ 160.00 $ 640.00 Littleford Day Service Department.Policy & Rates Travel, living and incidental expenses are not included in any of the rates and will be charged at cost plus 15% handling expenses. All extra time will be billed per rate below, & subject to the terms and conditions that follow. All prices subject to change without notice. STRAIGHT TIME is defined as time worked on a regular schedule of 8 hours between 7 a.m. And 3.30 p.m., Monday through Friday, or for time worked on any other agreed upon schedule of 8 hours per day, Monday through Friday. Each hour of straight time shall be paid for at the straight time rate. OVERTIME.... is defined as time worked in excess of or at times other than the regular straight time schedule. Each hour of overtime shall be paid for at one and one-half times the straight time rate, & Sunday & holidays shall be paid for at twice the straight time rate. STAND-BY TIME is defined as time, up to 8 hours per day, Monday through Friday, during which the representative, during the course of his assignment, is available for work but is not working because of circumstances beyond the company control. Each hour of stand-by time shall be paid for at the straight time rate. TRAVEL TIME... is defined as time spent by the representative up to 8 hours per calendar day in trave- ling to the job site, and in returning. Including travel occurring on Saturdays, Sundays and holidays (but not exceeding normal travel time between his headquarters and the job site). Each hour of travel shall be paid for at the straight time rate. TIME WORKED, TIME TRAVELED AND STAND-BY TIME....... occurring on the same day will each be charged at the rates and with the limitations as aforesaid. TRAVEL, LIVING & INCIDENTAL EXPENSES...... are not included in any of the rates, & will be charged at cost plus 15% handling expense. TRAVEL EXPENSES............The purchaser shall reimburse the Company for transportation expenses incurred by the representative in traveling to the job site and return. If the representative uses his personal automobile for transportation to the job site & return, or for daily work transportation, travel expenses shall be cal- culated at the Company´s rate per mile current at the time of such use, plus road tolls. If the representative does not use his personal automobile,travel expenses shall be the actual cost of air or rail transportation & local bus, taxi & car rental costs. (Air or rail transportation will ordinary be in coach, tourist or economy-class accommodation. First-class accommodations will be used only under special circumstances such as the unavailability or unsuitability of lesser accommodations). In case the representative should start from or return to a point other than his headquarters, charges for travel expenses and living expense s enroute shall not exceed what would normally be incurred from or to his headquarters.LIVING EXPENSES The purchaser shall reimburse the Company for the representative´s lodging, meals & other expenses incidental to the job while the representative is at the job site, and while traveling to the job site and return. MINIMUM CHARGE......A minimum charge of 4 hours at the applicable rate plus travel & living expenses,if any, will be made on all service calls.

6. Littleford Day Statistical Process Control Technology Batch Mixing / Processing Ploughshare Units, both for atmospheric / vacuum and Pressure Ops. : From Table-Top 5 & 20 lts units to Pilot 130 lts. Machines Larger sizes are available. W-10 High-Intensity vertical mixer, for Compounding & /or other applications re- quiring High-Shear Op. Ten Liters Capacity. Daymax # 10 Dispersers, for high quality dispersions of solids into liquids, such as plastisol, varnish, paint, and other applications. FA-3.5 Mixer, Nauta Type,for special mixing, drying requirements. 24.6 Gallons Working Capacity. Littleford Day Laboratory & Pilot Plant Equipment Experience the Accuracy & Quality of our Technology through Lab & Pilot Size Equipment For testing industrial processes in your own manufacturing environment, rent a trial demonstration Mixer or Dryer. Our Trial Demonstration Program allows your company to determine and witness in-house the advantages of the Littleford Day Technology for R & D, product formulation, quality control or direct production scale-up needs. Lab or pilot size units, available for rent or sale are free-standing in design and meet the most stringent requirements The most effective way to ensure reproducible product quality from batch to batch is with advanced state-of-the-art instrumentation. Our process control technology allow you to monitor & analyze data throughout the entire pharmaceutical process. Our control technologies manage cycle times, temperatures & other process crite- ria critical to effective product quality control and end point determination. Instrumentation Options Include: A reliable process validation system,including Watt Totalizer & Statistical Process Controls, help meet FDA,3A,USDA & other pharmac- eutical Standards. Programmable Logic Controllers (PLC´s) to help regulate: Vacuum Levels Jacket heating & cooling Chopper timing & duration Control & documentation of process steps Recording Watt (power) Meters to measure: Total Energy usage ,KWh Granulation end point Drying stages, from paste to granule to powder. Power source electrical controls to meet NEMA certified Stds .for your process. Chart recorder to document Temp. Profiles Load cell mounting to detect volatile loss by monitoring change in the mass weight of your units and its contents. Available Units for the In-Plant Rental Program A portion of the rental cost, under this program, will be applied to the purchase of any related Littleford Day Equipment.

7. To Cincinnati I-75 I-275 Donaldson Rd. Turfway Rd. U.S. 42 Greater Cincinnati Airport Industrial Road (1 Mi) Exit 180 Florence Union (1/2 Mi) 7451 Empire Drive Florence, KY. 41042-2985 To Lexington Our Installations Main Office: Florence, KY. Ph.- (606) 525-7600. Fax: 525-1446 Latin America: Mexico Cy.Ph.- (52-5)550-9459. Fax: 550-9459 Minutes away from Greater Cincinnati Airport, Our Lab. Center is fully equipped with all the required machinery for product development: Mixers, Dryers, Reactors, Granulators, Intensive Mixers-Coolers and support equipment such as filtering and vacuum drying systems. Technical Center Main Equipment: FM-50 Mixer/Processor Ploughshare FM-130 Mixer/Processor Ploughshare DVT-130 Polyphase Reactor KM-150 Continuous Mixer/Processor M-5 Lab. Mixer & Dryer M-20 Lab. Mixer & Dryer W-180/K-300 PVC Compounder W-10 High Intensity Mixer Daymax 10 Pastes Disperser Daymax 100 Pastes Disperser Mixtruder Sigma Double-Arm Mixer Mogul Tangential Sigma Mixer Cincinnatus Overlapping Sigma Mixer FA-10 Nauta Processor Bring Us Your Toughest Mixing, Drying & Reacting Problems.