1 / 24

Impacts

Impacts. An impact occurs when two objects are in contact for a very short period of time. Contact vs. Impacts. In general, if two objects are in contact long enough to precisely measure the forces between the objects throughout the contact time, then it is NOT considered an impact.

velika
Download Presentation

Impacts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Impacts An impact occurs when two objects are in contact for a very short period of time. Dr. Sasho MacKenzie - HK 376

  2. Contact vs. Impacts • In general, if two objects are in contact long enough to precisely measure the forces between the objects throughout the contact time, then it is NOT considered an impact. • Jumping: foot-ground or Pitching: hand-ball • If the contact time is very small and the forces cannot be directly measured, then it is considered an impact. • Golf: ball-clubhead or Baseball: bat-ball Dr. Sasho MacKenzie - HK 376

  3. Impacts or Collisions • Impacts are commonly referred to as collisions in physics. • Collisions can be elastic, meaning they conserve energy and momentum, inelastic, meaning they conserve momentum but not energy, or totally inelastic (or plastic), meaning they conserve momentum and the two objects stick together. Dr. Sasho MacKenzie - HK 376

  4. Impacts • When analyzing a contact as an impact, it is assumed that the collision is an instantaneous event. • For example, when a ball bounces off the floor, we would consider the ball to have negative velocity just before impact and then positive velocity the next instant. • Impact analysis requires combining three concepts • Relative Velocity, Coefficient of Restitution, and Conservation of Momentum. Dr. Sasho MacKenzie - HK 376

  5. Relative Velocity • When dealing with impact, we need to know what the velocities of the objects are relative to each other. • To determine relative velocity, you subtract one velocity from the other. • Essentially, you are saying if one object’s velocity was zero, what would the velocity of the other object be? • Vbat – vball (example for baseball hitting) • The relative velocity of “impact” is simply the absolute value of the above equation. Dr. Sasho MacKenzie - HK 376

  6. -10 m/s +4 m/s Relative Velocity: Heading a Soccer Ball Ball relative to Player -10 - (+4) = -14 m/s Player relative to Ball +4 - (-10) = +14 m/s Dr. Sasho MacKenzie - HK 376

  7. e = - ( V – v ) ..… 1 • ( V – v ) Coefficient of Restitution (e) • It is a measure of the elasticity of two objects that impact. Values can range from 0 (no bounce) to almost 1 (highest bounce). • It is calculated using the ratio of the relative velocity of separation to the relative velocity of approach. It can also be measured as the ratio of the restitution impulse to the compression impulse. Dr. Sasho MacKenzie - HK 376

  8. MV + mv = MV + mv ….. 2 • v = M[ V(1+e) – ev] + mv ….. 3 • M + m Conservation of Linear Momentum • The forces of impact are internal to the system (M + m). The above law states that if no external forces act on the system, then the momentum of the system is the same before and after impact. • Combining equations 1 and 2, we can solve for the • velocities of the objects post impact. Dr. Sasho MacKenzie - HK 376

  9. v = MV(1+e) • M + m Where: v is the velocity of the golf ball after impact, m is the mass of the golf ball, V is the velocity of the clubhead prior to impact, M is the mass of the clubhead, and e is the COR. Special Case • In certain cases, when one of the objects is at rest prior to impact (such as golf), the equation can be simplified. The velocity of the golf ball is: Dr. Sasho MacKenzie - HK 376

  10. Applying the Formula • Would a golf ball go farther if you increased clubhead mass, or increased it’s velocity? • We can graphically display how each of these variables would affect the velocity of the golf ball after impact. Dr. Sasho MacKenzie - HK 376

  11. Increasing Clubhead Mass Max Ball Velocity v = MV(1+e) M + m Ball Velocity Clubhead Mass M is on both the top and bottom of the equation, so when M gets large, increases in M show very small changes in ball velocity Dr. Sasho MacKenzie - HK 376

  12. Increasing the Velocity of the Club Ball velocity increases as club velocity increases. Ball Velocity v' = MV(1+e) M + m Velocity of Golf Club V is only on the top of the equation, so the bigger it gets, the bigger ball velocity gets. Dr. Sasho MacKenzie - HK 376

  13. Dr. Sasho MacKenzie - HK 376

  14. v = MV(1+e) M + m V = v (M+m) M (1+e) What is the Clubhead Velocity? With what velocity must a 0.25 kg clubhead contact a 0.05 kg golf ball in order to send the ball off the tee with a velocity of 80 m/s? e = .81 Therefore, V = 80 (.25+.05) .25 (1 + .81) V = 53 m/s Dr. Sasho MacKenzie - HK 376

  15. The Equations of Impact Equations 1 and 2 combine to give … Dr. Sasho MacKenzie - HK 376

  16. A golf ball is dropped from a height of 2 m onto the floor. If it rebounds with a velocity of 3.15 m/s, then what was the coefficient of restitution (e) associated with the impact? • Before (e) can be determined, the velocity with which the ball hit the floor must be known, then we can apply the formula • e = -v/v Dr. Sasho MacKenzie - HK 376

  17. Finding impact velocity of dropped ball • If we can figure out how long it takes a ball to fall 2 m, then we can find velocity knowing that v=at, and a, in this case is -9.81 m/s2. • Plotting a graph of the ball’s velocity allows us to determine the time that it spends accelerating to the floor. Dr. Sasho MacKenzie - HK 376

  18. t time of ball impact with floor velocity V = at = -9.81t Since acceleration is a constant -9.81, that means that that the velocity curve will have a constant negative slope of -9.81. The area under the velocity curve yields displacement. Since the area of a triangle is ½ height x base, we get … d = ½ (-9.81t)(t) = -4.905t2 . Since d=2, we can find t 2 = -4.905t2, therefore, t = 0.64 s. Since Vf = Vi + at, Vf = 0 + (-9.81)(0.65) = -6.3 m/s Dr. Sasho MacKenzie - HK 376

  19. Knowing that the golf ball hit the floor with a velocity of -6.3 m/s and rebounded with a velocity of 3.15 m/s, the coefficient of restitution can be calculated e = -v/v = -3.15/-6.3 = 0.5 Dr. Sasho MacKenzie - HK 376

  20. Baseball Example • In which case will the baseball leave the bat with a greater velocity and thus travel farther? • The pitcher throws the ball at -40 m/s and the batter swings at 20 m/s. • The pitcher throws the ball at -20 m/s and the batter swings at 40 m/s. • We could use the impact equations to plug in numbers and find the answer or we could think our way through it. Dr. Sasho MacKenzie - HK 376

  21. Relative Velocity of Impact • In both examples, the relative velocity of impact is going to be the same. • V – v = 20 – (-40) = 60 m/s • V – v = 40 – (-20) = 60 m/s • The objects do not know what their velocities are, so the characteristics of impact will be the same. • The same forces, for the same period of time in both A and B. Dr. Sasho MacKenzie - HK 376

  22. Impulse during Impact • Impulse = Ft • If the forces are the same and the length of time the forces act are the same, then the impulses must be the same for both cases. • Impulse = change in momentum = mv • Therefore, the change in velocity of the ball (v) equals the Impulse divided by the ball’s mass • Ft = mv v = Ft / m Dr. Sasho MacKenzie - HK 376

  23. Ball’s Change in Velocity (v) • If the impulse is the same for both A and B, then the v is the same for both A and B. • Since final velocity is equal to initial velocity plus change in velocity, we can come to a conclusion. • vf = vi + v, where v = Ft / m • vf = vi + Ft / m Dr. Sasho MacKenzie - HK 376

  24. Conclusion • vf = vi + Ft / m Same for both A and B The ball’s initial velocity is different in A and B. • vf = -40 + Impulse/mass • vf = -20 + Impulse/mass In case B, the ball will leave the bat with a greater positive velocity, and thus travel further. Dr. Sasho MacKenzie - HK 376

More Related