1 / 74

ANKYLOS

ANKYLOS. index. ANKYLOS – Surgical Procedures. index. ANKYLOS – Standard Abutment System. index. ANKYLOS – Balance Abutment System. index. ANKYLOS – SynCone Concept. ANKYLOS – Surgical Procedures. Instrument. Two-phase Handpiece-driven preparation

ventana
Download Presentation

ANKYLOS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ANKYLOS

  2. index ANKYLOS –Surgical Procedures

  3. index ANKYLOS –Standard Abutment System

  4. index ANKYLOS –Balance Abutment System

  5. index ANKYLOS –SynCone Concept

  6. ANKYLOS –Surgical Procedures

  7. Instrument • Two-phase • Handpiece-driven preparation • Manual preparation/final preparation

  8. Surgical procedure • Smoothing the bone • Marking the implant position • Twist drill

  9. Depth drill • Tri-spade drill • Low-pressure • Sub-crestal implant position

  10. Reaming the site • Non-cutting tip • Also be handpiece-driven • Max speed • 15 rpm • Max torque • 60NCm

  11. Measuring • Reamer top edge • Slightly below bone level • Tapping the thread

  12. Opening the implant pack and seating the insertion tool • Attach the handle to the implant driver

  13. Placing the implant manually • Dismantling • Remove the retaining screw

  14. Suture • Transgingiva healing • Sulcus former

  15. Uncovery • Incision • Minimally invasive uncovery

  16. Removing cover screw • Tissue punch(option)

  17. Standard abutment sulcus former • Height • 1.5-3mm • Diameter • 3.3-4.5 • remain 14 days • Compact-standard

  18. compact • Standard • Cover screw remaining

  19. Option • Membrane screw for GBR

  20. ANKYLOS –Standard Abutment System

  21. Concept • ANKYLOS implant system includes two abutment system based on the conical connector • Standard abutment system • Balance abutment system • Main difference • Technique for transferring the implant position to the lab. • Abutment level impression • Implant level impression

  22. Actual cases

  23. Abutments for chairside selection • Placed prior to impression • Superstructure is fabricated on implant analog • Tapering sulcus section provides for a maximum amount of tissue and firm gingiva • Vertical groove prevents the crown from rotating • Conical connector provides for bacteria proof, anti-rotation • Superstructure can be screw-retained or cemented

  24. Straight abutment • One-component abutment • Used for single crown • Retained with an occlusal screw • 25 Ncm torque

  25. 15° preangled abutment • Two-component abutment (with central straining screw) • Superstructure retained with a lateral screw • 15 Ncm torque

  26. All sulcus former and abutment are made of Ti6Al4V..

  27. Torque • Sulcus former • 6 NCm • Straight abutment • 25 NCm • 15° abutment • 15 NCm • Screw-retained superstructure • 10 NCm

  28. Clinical procedure • Recovering the implant

  29. Removing the cover screw

  30. Placing a try-in abutment

  31. Inserting a compact sulcus former • Emergence height from 1.5 to 6.0(1.5,3.0,4.5,6.0,) • Torque-6 NCm • Removing the sulcus former • After healing period(10-14 days)

  32. Optional procedure • Inserting a standard sulcus former • Cover screw must not be removed

  33. Inserting a straight abutment • 25 NCm • Headless screw shoud be screwed until the superstructure is placed • Prechilled to prevent rotation • 2-3 brief burst of spray at intervals of 5 seconds • Use cooling device

  34. Inserting a preangled abutment • Hold the desired direction with the positioning key • 15 NCm

  35. Fitting the impression cap • Integral retainer • Preangled abutment • Flat side of impression cap must be positioned atop the lateral thread

  36. Impression taking • Transfer • Pick-up

  37. Temporary restorarion • Use plastic temporary cap • Fabricated from a vacuum-formed template taken of the diagnostic wax-up

  38. Superstructure • Following technical section

  39. Crown retained with an occlusal screw(straight abutment) • Unscrew the headless screw • 10 NCm

  40. Crown retained with a lateral screw(15° abutment) • 10 NCm

  41. Cemented crown • Straight • Headless screw • Angled • Gutta percha,cotton..

  42. Model fabrication,solely implant-supported • Shortened groove for 15° abutment • Prior to the model fabrication, the undercut neck area of analog must be blocked out with wax • Position the analog

  43. Gingiva mask • model

  44. Two-piece analog • Seal the underside of the laboratory sleeve with wax to protect it against stone • For the preparation of a saw-cut model the abutment analog and the sleeve must be shortened below the notch

  45. Model fabrication, tooth-/implant-supported • Position analog • Gingiva mask

  46. Pouring with type IV super stone • Sawing out the model

  47. Prepare removable die • Handle for analog • When one-piece analog are used, a second analog is required

  48. Implant supported bridge,screw-retained • Mounting • Remove gingiva mask for good view

  49. Placing wax-up coping • Length marked • Shortening of the wax-up screw

  50. Sealing the hole depending on abutment type • Wax-up

More Related