1 / 5

ESS Bunker A concept for a common beamline interface. ISIS Engineering Group, February 2015

ESS Bunker A concept for a common beamline interface. ISIS Engineering Group, February 2015. For illustration purposes a conceptual CAD model of the VOR instrument is used. Beam port centreline alignment marks in addition to laser tracker network.

villarreale
Download Presentation

ESS Bunker A concept for a common beamline interface. ISIS Engineering Group, February 2015

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ESS Bunker A concept for a common beamline interface.ISIS Engineering Group, February 2015 For illustration purposes a conceptual CAD model of the VOR instrument is used.

  2. Beam port centreline alignment marks in addition to laser tracker network Beam port height and centreline alignment marks Tapped holes or “T” slots to enable bolting down of components. ESS Bunker alignment concept. Levelled steel location rings protruding above concrete level and at 1m radial spacing containing dowel location pins in a radial pattern at 3° intervals. Lowered concrete levels to remove shine paths

  3. How would this work? • Build leveled steel rings into the concrete base. • Fit all dowels as accurately as practical (±1mm). • Number, survey, and record all actual dowel locations. • Build beamline bases incorporating a dowel location hole and a location slot with location assisting chamfers (yellow). Ensure 3 feet to prevent rock (red)

  4. How would this work? Continued… • Fit adjustable kinematic mounts (Cone, Vee, Flat) between beamline component and base. Adjustment to be on beamline component not base. • Fit laser tracker nests to top of beamline component such that it can be surveyed from above. • Offline set up 2 dummy dowel pins. Fit base and beamline component. Align onto beam centre relative to dowels and record tracker mount positions relative to beam center. Laser tracker nests Kinematic mounts Dowel location hole and slot

  5. How would this work? Continued… • Install pre-surveyed bases and lower shielding components. • Locate beamline components onto pre-set kinematic mounts. • Confirm actual location & alignment using laser tracker from above. • To correct any alignment remove component and adjust offline using kinematic mount adjustment. • Re-install and confirm alignment with laser tracker. Shielding blocks coloured purple rest on the lowered concrete floor sections to remove radial neutron shine under the base shielding blocks David Turner 06/02/2015

More Related