1 / 24

Chapter 4 – RFID tag chip design

Chapter 4 – RFID tag chip design. Figure 4.1 Tag system architecture. Figure 4.2 The “frame-sync” sequence of Gen2 protocol. Figure 4.3 Multi-level supply voltage generation. Figure 4.4 An N-stage Dickson charge pump.

virote
Download Presentation

Chapter 4 – RFID tag chip design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 4 – RFID tag chip design

  2. Figure 4.1 Tag system architecture

  3. Figure 4.2 The “frame-sync” sequence of Gen2 protocol

  4. Figure 4.3 Multi-level supply voltage generation

  5. Figure 4.4 An N-stage Dickson charge pump

  6. Figure 4.5 The factors affecting the power conversion efficiency of the charge pump

  7. Figure 4.6 Charge pump circuit with self-threshold compensation

  8. Figure 4.7 Charge pump circuit with constant threshold compensation and substrate shift

  9. Figure 4.8 Symmetrical charge pump circuit with dynamic threshold compensation

  10. Figure 4.9 Oscillator based TRNG

  11. Figure 4.10 Logical memory map（redrawn from ISO 18000-6C.）

  12. Figure 4.11 Basic single-end SPNVM cell structure

  13. Figure 4.12 Schematic (a) control capacitor Mc and tunneling capacitor Mt (b) cross section

  14. Figure 4.13 General standard CMOS eNVM architecture

  15. Figure 4.14 (a)Voltage-mode sense amplifier (b) Current-mode sense amplifier

  16. Figure 4.15 Block diagram of RFID tag baseband

  17. Figure 4.16 Decode Margin for 1.28 MHz with 5% clock uncertainty (violations marked with the circle)

  18. Figure 4.17 Decode Margin for 1.92 MHz with 5% clock uncertainty

  19. Figure 4.18 BLF error when clock rate is 1.28 MHz (violations marked with the circle)

  20. Figure 4.19 BLF error when clock rate is 1.92 MHz

  21. Figure 4.20 Clock Gating

  22. Figure 4.21 Example of adiabatic CMOS circuit (left) versus standard CMOS Logic (right)

  23. Figure 4.22 Energy dissipation in the adiabatic circuit

  24. Figure 4.23 The different package of on-chip antenna and tag chip

More Related