1 / 10

Magnetic Oil Filtration

Magnetic Oil Filtration. Simple. Easy. Obvious. Magnetic Flux Field Penetration. Strongest magnets penetrate filter wall No loss of oil flow No loss of oil pressure Non-invasive patented technology. Cut open filter from a diesel engine after 800 hours operation.

wallace-barrett
Download Presentation

Magnetic Oil Filtration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Magnetic Oil Filtration Simple Easy Obvious

  2. Magnetic Flux Field Penetration • Strongest magnets penetrate filter wall • No loss of oil flow • No loss of oil pressure • Non-invasive patented technology Cut open filter from a diesel engine after 800 hours operation

  3. Improve Quality of Operation • FilterMag augments full flow oil & fuel filtration • Value based filtration removes particles ≥40 microns • Premium filtration removes particles ≥ 25 microns • FilterMag assisted filtration removes ferrous particle ≥ 1 micron • Preserve higher quality of oil during operation • Reduce risk of failure • Engine • Fuel systems • Hydraulic systems • Reduce number of maintenance incidences

  4. SAE Paper #881825 by General MotorsDetroit Diesel & AC Spark Plugs • Test: • Determine impact on engine life from particles in oil • Add 50 grams of AC Fine Test Dust EVERY HOUR for 8 hours • Result:Enhance filtration from 40 to 30 microns >>>> wear reduced 50% • Enhance filtration from 40 to 15 microns >>>> wear reduced 70% • Conclusion: • Controlling the abrasive contaminants in the range of 2 to 22 microns in lube oil is necessary for controlling engine wear.

  5. Particles 2 to 22 microns . . . • Typically removes 50 to 90% ferrous particles • Typically removes 20 to 50% non-ferrous metals • Due to reduced corrosion from absence of ferrous particles • Variance in performance affected by: • Engine service intervals (quantity & quality) • Engine operation characteristics – severe versus light duty • Use with bypass oil filtration systems • Performance achieved with: • NO interference with oil flow • NO pressure change inside oil filter or engine • NO change in engine oil system

  6. Magnetic flux completely directedto point of use Strong Neodymium Rare-earth magnets Steel Plates shield magnetic energy Zytel Housing • Steel plates STOP stray magnetic flux • Magnetic energy focused inside filter • Paper clip challenge! It will not stick to outside of housing

  7. Installation… • No tools needed • No training required 1 2 3

  8. FilterMag Value Improve engine reliability Improve hydraulic system reliability Improve fuel system reliability Reduced maintenance costs Best magnetic oil filtrationproduct available

  9. Your Local, Friendly FilterMag Representative • Bill Robbins • TEL: 602.980.0000 • warobbins@earthlink.net • FAX: 602.636.8195 www.filtermag.com

More Related