1 / 5

Labs 10,11,12,13 of Boson NetSim

Labs 10,11,12,13 of Boson NetSim. Lab 10 – Switch Basics part I. Basic Configuration on a switch Very Similar to Router How exchange between different mode (user mode, privileged mode, global configuration mode) Naming a switch Setting a password for privileged exec mode.

washi
Download Presentation

Labs 10,11,12,13 of Boson NetSim

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Labs 10,11,12,13 of Boson NetSim

  2. Lab 10 – Switch Basics part I • Basic Configuration on a switch • Very Similar to Router • How exchange between different mode (user mode, privileged mode, global configuration mode) • Naming a switch • Setting a password for privileged exec mode

  3. Lab 11 – Switch Basics part II • Basic Configuration on a switch • Setting a password for privileged exec mode with levle • Setting a message when connecting to switch CLI • Some show comands in privileged mode (show version, show interfaces, …)

  4. Lab 12 – Using the System Configuration Dialog for Initial Switch Configurations • the System Configuration Dialogis a script that consists of a series of prompts asking you to enter values to assist you in creating a basic system configuration • Which configurations is in System Configuration Dialog? • ConfigBasic management setup • Config hostname and password • Config SNMP protocol and paramaters • Configip Address for interfaces • Save configurations into startup-config • Setting the default gateway for switch and ping it

  5. Lab 13 – Switch and Workstation Configuration • Configure the appropriate settings on Switch and PC to enable PC to communicate with Switch • Configure VLAN 1 with the appropriate IP address and subnet mask on switch • Configure PC with the appropriate IP address and subnet mask and default gateway • Check connectivity between switch and PC

More Related