1 / 6

Finned Type Heat Exchanger, Liquid Ring Vaccum Pump, Truck Blower ; Swamatics

Swamatics is the Manufacturer of Finned Type heat Exchangers, Industrial heat is a type of heat exchanger that uses metal plates to transfer heat between two fluids.<br>Visit: http://www.swamatics.com/

webcadence
Download Presentation

Finned Type Heat Exchanger, Liquid Ring Vaccum Pump, Truck Blower ; Swamatics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Swam Pneumatics Private Limited www.swamatics.com

  2. Introduction of Centrifugal Fan& Blower • Centrifugal Fans and Blowers typically have one of eight types of wheels that draw the air into the inlet of the blower housing, through the wheel, and discharges it at 90 degrees . • The two most common types of Centrifugal Blowers are Pressure Blowers and Volume Blowers. • Pressure Blowers are designed to draw or push air at high pressures, rated in static pressure water gauge (SPWG). Volume Blowers are designed to draw or push larger volumes of air, rated in cubic feet of air per minute (CFM),at lower static pressures than Pressure Blowers. www.swamatics.com

  3. Centrifugal Fan & Blower Centrifugal Blower Centrifugal Fan www.swamatics.com

  4. Parts of Centrifugal Fan Main parts of a centrifugal fan are : 1. Fan housing 2. Impellers 3. Inlet and outlet ducts 4. Drive shaft 5. Drive mechanism www.swamatics.com

  5. Principles of Centrifugal Fan The centrifugal fan uses the centrifugal power supplied from the rotation of impellers to increase the kinetic energy of air/gases. When the impellers rotate, the gas particles near the impellers are thrown off from the impellers, then move into the fan casing. As a result, the kinetic energy of gas is measured as pressure because of the system resistance offered by the casing and duct. The gas is then guided to the exit via outlet ducts.  www.swamatics.com

  6. Contact Us Address Info C-2,SECTOR-3,NOIDA-201301,(U.P.) INDIA. Telephone: +91-120 - 469 6222FAX: +91-120 - 244 3282E-mail: sales@swamatics.comWebsite: www.swamatics.com

More Related