1 / 22

3441 Industrial Instruments 1 Chapter 3 Digital Signal Conditioning

Princess Sumaya Univ. Electronic Engineering Dept. 3441 Industrial Instruments 1 Chapter 3 Digital Signal Conditioning. Dr. Bassam Kahhaleh. Digital Signal Conditioning. Objective Introduce the basic technique of digital signal conditioning, especially interfacing, in process control.

whitney-atkins
Download Presentation

3441 Industrial Instruments 1 Chapter 3 Digital Signal Conditioning

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Princess Sumaya Univ.Electronic Engineering Dept. 3441Industrial Instruments 1Chapter 3Digital Signal Conditioning Dr. Bassam Kahhaleh

  2. 3441 - Industrial Instruments 1 Digital Signal Conditioning Objective Introduce the basic technique of digital signal conditioning, especially interfacing, in process control.

  3. 3441 - Industrial Instruments 1 Digital Signal Conditioning Digital Signals Pressure Level Temperature

  4. 3441 - Industrial Instruments 1 Digital Signal Conditioning Digital Signals TTL Output • Totem-pole • Tri-state • Open-collector I H = 0.04 mA I H = 0.4 mA I L = 1.6 mA I L = 16 mA

  5. 3441 - Industrial Instruments 1 Digital Signal Conditioning TTL Interfacing • Never leave inputs unconnected • Never short-circuit outputs to ground or Vcc • Never short-circuit outputs together unless they are tri-state or open-collector outputs • Never use pull-down resistors • Be careful when using different power supplies (VCC1 = +5, VCC2 = +12).

  6. 3441 - Industrial Instruments 1 Digital Signal Conditioning TTL Interfacing What is the minimum resistance value? When the tri-state output is floating: V should be max 0.8, IR = 1.6 mA  R = 0.8 / 1.6 = 0.5 KΩ V IR Now what happens when the tri-state output goes high? V should be min 2.4 V, therefore IR = 2.4 / 0.5 K = 4.8 mA !!

  7. 3441 - Industrial Instruments 1 Digital Signal Conditioning TTL Interfacing +VCC +VCC Typically, R = 10 KΩ  IR max = (5 – 0.2) / 10 = 0.48 mA IR V Now what is the value of V when the tri-state outputs goes floating? IR = 0.04 mA  V = 5 – 0.04 x 10 = 4.6 Volts

  8. 3441 - Industrial Instruments 1 Digital Signal Conditioning TTL Interfacing +VCC LED: V = 1.5 ~ 1.6 V I = 10 ~ 15 mA IR R Vo Standard TTL gates should not source such current to a LED, but it can sink it. What is the minimum value of R? VO max = 0.8 V, IR = 15 mA  R = (5 – 1.5 – 0.8) / 15 = 0.18 KΩ Typically, VO max = 0.2 V, IR = 15 mA, R = 220 Ω

  9. 3441 - Industrial Instruments 1 Digital Signal Conditioning TTL Interfacing +VCC2 +VCC1 VCC2 > VCC1 IR R Vo

  10. 3441 - Industrial Instruments 1 Digital Signal Conditioning TTL Interfacing Relay current = 40 mA β = 100  IB = 0.4 mA R = (2.4 – 0.7) / 0.4 = 4.25 KΩ R

  11. + − + − 3441 - Industrial Instruments 1 Digital Signal Conditioning Converters Comparators 2.2 mV/°C T 0.352 V Alarm 0.2 V / kPa P 2.0 V Comparators’ Power Supply?

  12. + − 3441 - Industrial Instruments 1 Digital Signal Conditioning Converters Hysteresis Comparators Vout R f VO R Vin Vout Vref 0 Vin VL VH

  13. 3441 - Industrial Instruments 1 Digital Signal Conditioning Converters Digital-to-Analog Converters (DAC) Bipolar DAC Conversion Resolution?

  14. − + 3441 - Industrial Instruments 1 Digital Signal Conditioning R Converters R-2R ladder DAC R R R V out 2R 2R 2R 2R 2R b0 b1 b2 b3 VR

  15. RTH = R − + VTH = ½ VR 3441 - Industrial Instruments 1 Digital Signal Conditioning R Converters R-2R ladder DAC R R R V out 2R 2R 2R 2R 2R VR

  16. RTH = R − + VTH = ¼ VR 3441 - Industrial Instruments 1 Digital Signal Conditioning R Converters R-2R ladder DAC R R R R V out ½ VR 2R 2R 2R

  17. 3441 - Industrial Instruments 1 Digital Signal Conditioning Converters Analog-to-Digital Converters (ADC) Bipolar ADC Conversion Resolution?

  18. 3441 - Industrial Instruments 1 Digital Signal Conditioning Converters Parallel Feedback ADC SC VX Logic CountingNetwork EOC bn-1 bn-2 b1 b0 Comparator ... DAC

  19. C bn-1 bn-2 b1 b0 Digital Counter R −VX − + +VR Comparator Logic Control EOC SC 3441 - Industrial Instruments 1 Digital Signal Conditioning Converters Ramp ADC (Dual-Slope) VO V1 t 0 T1 t x VO

  20. 3441 - Industrial Instruments 1 Digital Signal Conditioning Converters Conversion-Time Consequences Vi VN+1 VN t C

  21. + − 3441 - Industrial Instruments 1 Digital Signal Conditioning Converters Sample-and-Hold (S/H) Vc(t) Vin(t) ADC C S/H

  22. 3441 - Industrial Instruments 1 Digital Signal Conditioning End of Chapter 3

More Related