Easy Support For How To Print a Test Page in HP Ink Tank 310?

1. How To Print a Test Page in HP Ink Tank 310? • A test page is printed to confirm whether the hardware of the printer functions properly. Make sure that the printer is turned on and connected to the computer and the network. • The network can be either HP Ink Tank 310 wired or wireless 123.hp.com/setup 310. Check whether the network signal is strong and stable. Examine the level ink tanks and has the ink up to the required level. • If not, refill the ink using the resealable bottles that are supplied along with the printer. Make sure that the printheads are installed properly by removing the protective tapes. • Open the input tray and slide the paper extender to the left side. Load a stack of plain paper into it and check whether you have loaded the paper that is compatible with the printer. • Check whether you have downloaded the driver that is compatible with the printer and set the 123.hp.com/ink tank 310 as your default printer. Press and hold the Power button and press the Cancel button immediately.

2. • Release the Cancel button as well as the Power button and wait for the printer to print the test page. The HP Ink Tank 310 printer now prints the test page which contains all the information about the printer hardware. This helps to find the hardware status of the printer.