1 / 27

Modeling

Modeling. Use math to describe the operation of the plant, including sensors and actuators Capture how variables relate to each other Pay close attention to how input affects output Use appropriate level of abstraction vs details

winfred-smith
Download Presentation

Modeling

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Modeling • Use math to describe the operation of the plant, including sensors and actuators • Capture how variables relate to each other • Pay close attention to how input affects output • Use appropriate level of abstraction vs details • Many types of physical systems share the same math model  focus on models

  2. Modeling Guidlines • Focus on important variables • Use reasonable approximations • Write mathematical equations from physical laws, don’t invent your own • Eliminate intermediate variables • Obtain o.d.e. involving input/output variables  I/O model • Or obtain 1st order o.d.e.  state space • Get I/O transfer function

  3. Common Physical Laws • Circuit: KCL: S(i into a node) = 0 KVL: S(v along a loop) = 0 RLC: v=Ri, v=Ldi/dt, i=Cdv/dt • Linear motion: Newton: ma = SF Hooke’s law: Fs = KDx damping: Fd = CDx_dot • Angular motion: Euler: Ja = St t = KDq t = CDq_dot

  4. More Physical Laws

  5. Electric Circuits Voltage-current, voltage-charge, and impedance relationships for capacitors, resistors, and inductors impedance admittance

  6. RLC network KVL:

  7. Or start in s-domain and solve for TF directly

  8. Zf Iin=0  Zi Vin=0 Gain = inf Ideal Op amp:

  9. Mesh analysis Mesh 2 Mesh 1

  10. Write equations around the meshes Sum of impedance around mesh 1 Sum of applied voltages around the mesh Sum of impedance common to two meshes Sum of impedance around mesh 2

  11. Determinant

  12. Nodal analysis i3 i1 Kirchhoff current law at these two nodes i2 i4 i1 - i2 - i3=0 i3 - i4 =0

  13. Kirchhoff current law conductance

  14. Sum of injected current into each node Sum of admittance at each node Admittance between node i and node j

  15. Op Amp circuit example Note: ip1=0, ∴vp1=vo=vA & vB=vp2=0 Let vC1 & vC2 be s.v., vo output.

  16. KCL at A: vo is not s.v. nor input, use vo=vC2

  17. KCL at B: 0 vo1 not s.v. nor input, vo1=vA+vC1=vn1+vC1 =vp1+vC1=vo+vC1 =vC2+vC1

  18. Output eq:

More Related