1 / 22

Training modules

Training modules. 1. What’s new in SmartTool ? 2. What can SmartTool do for my borehole? 3. Meet the hardware 4. MeasureIT software that sets-up, runs, calculates & checks. 5. Practical exercises with the SmartTool . 6. DisplayIT software, showing off the results.

winona
Download Presentation

Training modules

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Training modules 1. What’s new in SmartTool? 2. What can SmartTool do for my borehole? 3. Meet the hardware 4. MeasureIT software that sets-up, runs, calculates & checks. 5. Practical exercises with the SmartTool. 6. DisplayIT software, showing off the results. 7. The Single-shot StoreIT menus. 8. The Multi-shot StoreIT menus.

  2. 1 What’s new -- SensITprobe -- sealed and unopenable no plugs or cables

  3. 1 What’s new -- StoreITdata pad -- sealed in an Aquapac,--hung on a lanyard.

  4. 1 What’s new -- SensIT& StoreIT -- ten years power - built in, no batteries or chargers. no plugs or cables

  5. 1 What’s new -- SensIT, StoreIT & your PC -- transfer data by automatic fast radio link.

  6. 1 What’s new -- Quality assurance system -- warns of magnetism or movement

  7. 1 What’s new -- SensIT in its pressure barrel Shock resistant to 6000G Shockproof to 6000g Watertight to 4000 metres

  8. 2 What can SmartTool do for me? -- Four different tasks Single-shot survey ----- read data on StoreIT ----- combine data on PC to make … Multi-shot survey 3D hole path using magnetic azimuth measurement Orientated survey ----- less than 30m, close to vertical 3D hole path maintaining azimuth with orientation rods Tool or Core orientation,using Gravity roll angle ---- for inclined holes Magnetic toolface angle --- for vertical holes

  9. 2 What can SmartTool do for me? -- Eight measurements at each DEPTH (shot) recorded by SensIT 1 Dip (Inclination) of hole 2 Direction (azimuth) of hole for Positional Survey • 3 Gravity Roll angle of SensIT 4 Toolface angle of SensIT • for Orientation 5 Magnetic field strength 6 Magnetic dip angle for Quality Assurance 7 Temperature of SensIT 8 Depth, time and date for the record

  10. 2 What can SmartTool do for me? -- Survey

  11. 2 What can SmartTool do for me? -- Orientation Setting the zero Gravity Roll Angle

  12. 2 What can SmartTool do for me? -- Orientation Setting the zero MagneticToolface Angle

  13. 2 What can SmartTool do for me? -- Quality assurance. The Earth’s Gravitational Field

  14. 2 What can SmartTool do for me? -- Quality assurance. The Earth’s Gravitational Field If Grav. Field is not 1.00 G, then SensIT ismoving; Dip and Azimuth may both be unreliable

  15. 2 What can SmartTool do for me? -- Quality assurance. The Earth’s magnetic field Variation- angular difference between True North and Magnetic North Magnetic Field Strength - the force of the earth's magnetic field Magnetic Dip Angle - angle the field force lines make with the horizontal At each place on the earth's surface,these values are known.

  16. 2 What can SmartTool do for me? -- Quality assurance. Set the threshold for the local magnetic environment

  17. 2 What can SmartTool do for me? -- Quality assurance. Identify the unreliable azimuths

  18. Training modules 1. What’s new in SmartTool? 2. What can SmartTool do for my borehole? 3. Meet the hardware 4. MeasureIT software that sets-up, runs, calculates & checks. 5. Practical exercises with the SmartTool. 6. DisplayIT software, showing off the results. 7. The Single-shot StoreIT menus. 8. The Multi-shot StoreIT menus.

  19. Training modules 1. What’s new in SmartTool? 2. What can SmartTool do for my borehole? 3. Meet the hardware 4. MeasureIT software that sets-up, runs, calculates & checks. 5. Practical exercises with the SmartTool. 6. DisplayIT software, showing off the results. 7. The Single-shot StoreIT menus. 8. The Multi-shot StoreIT menus.

  20. 7 The StoreIT Single-shot menus DATA, Shows SurveySETTINGS #, Hole Ref. & Depth Timer } +/- Azimuth Depth }3 +/ Inclination Hole ref. } +/- OK Mag Field Enter Archive OK Mag Dip Set Mag Field/Dip OK G.R/angle Zero G.R/angle OK M.T/face Zero M.T/face OK Time Set time +/- OK Date Set date +/- OK Temperature Multi-shot mode? OK >>Press SETTINGS to exit >>Press NEW to start timer Here the DATAbutton displays each reading from a Single-shot survey.

  21. 8 The StoreIT Multi-shot menus First survey press New Next Survey press New SETTINGS 1ChangeSETTINGS 2 ChangeSETTINGS 3 Hole ref.}Next DepthHole ref. Start depth}Depth intervalStart depth Depth interval } 5End surveyDepth interval Direction} >>Press DATADirection Time interval} to continue survey End session -download Set time >>Press DATA Set date for next survey Single-shot mode? >>Press DATA for first survey • Here the DATAbutton is only a switch from the SETTINGSmenus back to the survey operation.Then, to start a survey, pressNEW

More Related