1 / 5

2VB-601 Exam Dumps Questions from CertQueen

2VB-601 exam dumps questions from CertQueen are valid in your preparation.

wirygnrhd
Download Presentation

2VB-601 Exam Dumps Questions from CertQueen

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. https://www.certqueen.com/2VB-601.html FREE Dumps for Vmware 2VB-601 Exam 1.What are two main advantages of using multiple disk groups within each host? (Choose two.) A. Performance B. Backward compatibility C. Cost D. Redundancy Answer: A,D 2.What are three fundamental concepts of vSAN clusters? (Choose three.) A. Flash devices can be shared between disk groups. B. A maximum of seven capacity disks per disk group issupported. C. A maximum of five disk groups per host is supported. D. Dual socket CPU for each host is required. E. Once cache drive per disk group is required. Answer: B,C,E Explanation: https://kb.vmware.com/s/article/2106708 3.Which statement accurately describes cache tier sizing guidance for an all-flash vSAN cluster that will be supporting write-intensive workloads? A. Multiple disk groups with larger cache devices should be used. B. Multiple disk groups with two cache devices per disk group should be used. C. A single disk group with a small cache device should be used to minimize de-staging write amplification. D. Two cache devices per disk group should be configured for redundancy. Answer: A 4.What are two ways to examine the storage policy compliance of a virtual machine? (Choose two.) A. 1. Browse to the virtual machine in the vSphere Web Client navigator.2. On the Summary tab, examine the value of the VM Storage Policy Compliance property under VM StoragePolicies. B. 1. Browse to the virtual machine in the vSphere Web Client navigator.2. Right-click the virtual machine and select "Check storage policy compliance". C. 1. In the vSphere Web Client, navigate to the vSAN cluster.2. On the Storage tab, click 1 / 5

  2. https://www.certqueen.com/2VB-601.html vSAN and select Virtual Disks.3. Right-click on the virtual machine and select "Compliance status". D. 1. In the vSphere Web Client, navigate to the vSAN cluster.2. On the Monitor tab, click vSAN and select Virtual Objects.3. Select a virtual object.4. Examine the value in the Compliance Status property for the object. Answer: A,D Explanation: https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.virtualsan.doc/GUID- DA1C7F06-0D99-4300-B427-0BB00EEB7964.html 5.Consider the following vSAN cluster scenario: What is the minimum number of physical hosts required to be a supported vSAN configuration? A. Five (5) B. Three (3) C. Two (2) D. Four (4) Answer: B Explanation: VMware vSAN Design and Sizing Guide 6.5.Page: 18 6.VMware vSAN encryption requires the use of a key management server (KMS) solution. Which Key Management Interoperability Protocol (KMP) must the KMS solution support? A. 1.0 B. 1.3 C. 1.2 D. 1.1 Answer: D Explanation: https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.virtualsan.doc/GUID-1 583A645-07EE-4D26-8698-080283694635.html 7.What is the minimum number of components that comprise a 100GB vSAN object with a RAID-5 erasure coding policy assigned to is? A. 3 B. 9 C. 6 D. 4 Answer: D 8.Which services for vSAN are provided by NexentaConnect? A. Encryption and key management B. Apache and JavaScript 2 / 5

  3. https://www.certqueen.com/2VB-601.html C. NFS and SMB D. iSCSI and FC Answer: C 9.The following are the configuration details for a 10-node all-flash vSAN cluster: All hosts contain one vSAN disk group. Each disk group has 400GB for the cache tier and 1600GB for the capacity tier. A host in the cluster is placed into maintenance mode. The maintenance mode option selected is "Ensure data accessibility from other hosts". How much is the vSAN datastore raw capacity reduced while the host is in maintenance mode? A. 1600GB B. 400GB C. 0GB D. 2000GB Answer: A Explanation: https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.virtualsan.doc/GUID-7 3493C3C-0DEC-419D-9E36-801B2839A5A5.html 10.Which are two characteristics of a RAID-5 storage configuration? (Choose two.) A. Data remain available withthe loss to two storage devices. B. It uses less storage capacity than mirroring with the same level of availability. C. Data is striped across multiple storage devices. D. It requires a minimum of five storage devices. Answer: B,C 11.Which three statements are true regarding vSAN networking requirements? (Choose three.) A. Each host must have minimum bandwidth dedicated to vSAN:Dedicated 1 Gbps for hybrid configurations.Dedicated or shared 10 Gbps for all-flash configurations. B. vSANsupports both IPv4 and IPv6. C. Each host on the vSAN cluster must have a VMkernel network adapter with vSAN traffic enabled. D. Each host in a vSAN cluster must use NIC teaming with NetFlow enabled. E. The vSAN port group must have Promiscuous Mode emabled. Answer: A,B,C Explanation: https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.virtualsan.doc/GUID- AFF133BC-F4B6-4753-815F-20D3D752D898.html 12.Which format for desktops does vSAN support? A. vmfsSparse 3 / 5

  4. https://www.certqueen.com/2VB-601.html B. SE Sparse Disk C. Horizon Sparse D. vSAN Sparse Answer: D 13.Which two vSAN configurations require the use of a witness appliance? (Choose two.) A. two-node configuration B. all-flash configuration C. stretched cluster configuration D. hybrid configuration Answer: A,C 14.When implementing vSAN stretched clusters, bandwidth requirements between the preferred and secondary sites are determined by which factors? A. Total number of read operations and block size B. Total number of componentsand block size C. Total number of write operations and block size D. Total number of read operations, total number of write operations and block size Answer: C 15.Which three of the listed objects types can be viewed in the vSAN Used Capacity Breakdown user interface? (Choose three.) A. Swap objects B. Disk groups C. File system overhead D. Virtual disks E. Physical disks Answer: A,C,D Explanation: https://cormachogan.com/2016/02/25/vsan-6-2-part-7-capacity-views/ 16.Which two statements are true about the vSAN health and performance services? (Choose two.) A. The vSAN performance service must be enabled before the vSAN health service. B. The vSAN health service is enabled by default. C. The vSAN health service is disabled by default. D. The vSAN performance service is disabled by default. Answer: B,D 17.What are two ways that the storage policies can be allied? (Choose two.) A. Execute a PowerCLI script B. Right-click a virtual machine in the vSphereWeb Client 4 / 5

  5. https://www.certqueen.com/2VB-601.html C. Run the "esxcli vsan storage tag add" command D. Select the vSAN datastore and click "Apply Storage Policy" Answer: A,D 18.Which statement is true regarding vSAN and vSphere high availability (HA) interoperability? A. ThevSAN datastore must be configured as the heartbeat datastore for vSphere HA. B. vSphere HA must be disabled before enabling vSAN. C. vSphere HA host isolation must be set to disabled. D. The vSphere HA heartbeat object can only be assigned the default datastore storage policy. Answer: B Explanation: https://docs.vmware.com/en/VMware-vSphere/6.0/com.vmware.vsphere.virtualsan.doc/GUID- D68890D8-841A-4BD1-ACA1-DA3D25B6A37A.html 19.What is the maximum supported latency between the preferred and secondary sites in a vSAN stretched cluster configuration? A. 5 milliseconds round trip time B. 10 milliseconds round trip time C. 2.5 milliseconds round trip time D. 200 milliseconds round trip time Answer: A Explanation: http://www.yellow-bricks.com/2015/09/23/designing-a-virtual-san-stretched-cluster/ 20.Which statement describes vSAN architecture? A. Redundant array of independent disks (RAID) B. Virtual Machine File System (VMFS) on local mirrored storage devices C. Local storagedevices aggregated into a single datastore shared by all hosts in the cluster D. Block storage enabled through redundant virtual storage appliances Answer: C Explanation: https://docs.vmware.com/en/VMware-vSphere/5.5/com.vmware.vsphere.storage.doc/GUID- ACC10393-47F6-4C5A-85FC-88051C1806A0.html 5 / 5 Powered by TCPDF (www.tcpdf.org)

More Related