Presentation Transcript

1. WelcomeDistrict Techies
2. Agenda IT Readiness Tool EOY SC Specific Reminders Pearson EOY Procedures PowerSchool tasks to complete before QDC4 final data transmission to SCDE Question/Answer

3. End of Year Preparation, Process, and Post Activities

   With SC Specifics Included
4. End of Year – SC Specifics Storing Final Grades PRIOR to submitting QDC4 final data / CATE data elements / 180th day final data / EOY final grades for scholarship purposes (whatever you want to call these data) through your SWEET upload, you MUST ensure that final grades for all courses are stored in the Stored Grades table.
5. End of Year – SC Specifics Storing Final Grades Why the emphasis? Your Perkins funds are impacted by missing grade data for CATE students. SPSS Intervention –data are necessary for At-Risk Identification Your student scholarship recipients may miss their submission deadlines. …
6. End of Year – SC Specifics Graduated Students Data Follow your procedure for retaining final data values for graduating students. Update the Diploma Earned field since SCDE offices use these data for graduate counts.
7. End of Year – SC Specifics Graduated Students Data Capture data values for class rank by year (for scholarships purposes) in user-defined fields.
8. End of Year – SC Specifics Graduated Students Data Save or archive final, completed “pdf” formatted transcripts for each student whose courses include“credit-bearing” units. These could include 7th, 8th, as well as 9th-12th grade students.
9. End of Year – SC Specifics To display data elements on Graduated Students’ page after the end of each school year, ensure these user-defined fields are available and populated with EOY data; otherwise, store all transcripts in PDF format:
10. STOP !!! SUBMIT your FINAL 180-day data through SWEET before continuing…
11. End of Year – SC Specifics Data values to “clear/remove” so fields are not populated for the next year… Homeless Page fields Homeless Indictor Checkbox Served by McKinney-Vento (Blank-No or Yes) Primary Night Time Residence (Blank-No or Yes) Unaccompanied Youth (Blank-No or Yes) Military Parent field
12. End of Year – SC Specifics Data values to be “updated” since the greater number of students will be promoted – wait for official tech note on this… True Grade field Grade promotion consideration Impacts orders for PRECODE testing materials ---------------- What is the best process to increase the grade level for promoted students; what is the best process to leave the grade as current for retained students Custom field on SC Additional Student Information custom page Has validation based on the IS (Instructional Setting) field selection of SE (Special Ed)
13. End of Year – SC Specifics Special Programs: Entry Date and Exit Date All students must have a new start date for SP enrollments each school year. All students in SPs should have an exit date of the last day of school for the current school year prior to EOY process.
14. End of Year – SC Specifics Special Programs: Enrollment per PowerSchool Can span more than one school year Currently auto populates Exit Date during the transfer process. Are not tied to any course, section enrollments, or the Years & Terms Are tied to a grade level and the school in which the student is enrolled
15. End of Year – SC Specifics Special Programs: Enrollment per PowerSchool SPECIAL NOTE: If a student is enrolled in a special program at the beginning of the school year and that enrollment has no exit date, the enrollment will not be ended when the End-of-Year (EOY) process is run, rather, the enrollment will remain open ended.
16. End of Year – SC Specifics Retained Students User sets Next Grade Level value in Scheduling Setup page during the scheduling process Students’ Current Grade Level compared to the Next Grade Level in the student Schedule Setup Screen Results of comparison allows EOY process to automatically promote, retain, or graduate student

17. End of Year Preparation

    READ ME FIRST BEFORE DOING ANYTHING
18. Important EOY Information Before running the PS EOY process, you must follow particular steps in a particular order. (See checklist provided for your tracking these steps.) You are strongly urged to document carefully all changes you make and indicate when backups are made for your reference throughout this process.
19. End of Year Preparation Checklist Use the following checklist to track your progress through the End of Year Preparation phase: Store Grades for the Current Year Backup PowerSchool Validate School Enrollments Validate Section Enrollments Print Reports Create Years and Terms (required) Assign Next School Indicators (required) Assign Next Year Grade Values (required) Clear Activities Configure Default Grade Level for FTEs (required) Configure Fees Complete Scheduling and Commit Schedules Print Meal Transactions and PowerLunch Reports Print Extract State Reporting Information Export Historical Grades
20. End of Year (EOY) Definition Closes out current school year Transfers all students to the grade level and school for next school year Important NOTES: Run EOY process AFTER school year finished Run EOY process AFTER all final grades for current year permanently stored Run EOY process AFTER SUMMER SCHOOL TERM (if you are running such a summer program using PS)
21. EOY, Specifically Sets student’s Exit Date to last day of school year Sets student’s Next Grade for next year Sets student’s Next School for next year Removes Parental Access Records
22. EOY, Specifically + Batches: PowerLunch Serving Sessions BulletinItems: Daily bulletin Records DBLog: Tracks various changes made in DDA GLDetail: PowerLunch meal transactions and deposits Logins: PowerSchool Login Sessions PhoneLog: Guardian Web Access Sessions Lunch Balances Transferred to Next Year Fee Balances Cleared or Transferred to Next Year
23. EOY Preparation 1. Backup / Archive PowerSchool Data file 2. Validate Enrollment Dates 3. Print Reports (for both internal and external audits 4. Years and Terms (Required) 5. Next School Indicator (Required) 6. Next Year Grade (Required) 7. Activities 8. Default Grade Level for FTEs (Required) 9. Scheduling
24. EOY Preparation (continued) 10. PowerSchool Gradebook 11. Meal Transactions 12. Historical Grades
25. 1. Back UP PS Data File (Highly Recommended) Preparing for EOY – modifies records Undoing errors –revert to a data file backup. (Label backup appropriately) Referring to the Backup and Restore Guide for information about backups – save your headaches
26. 2. Validate Enrollment Dates Use Section Enrollment Audit Report To access the Section Enrollment Audit report, navigate to Start Page > Reports > Run Reports Then click on Section Enrollment Audit. Use School Enrollment Audit Report To access the School Enrollment Audit report, navigate to Start Page > Reports > Run Reports Then click on School Enrollment Audit.
27. 3. Print Reports Difficult to extract some historical data Print and archive the current school year reports before running the EOY process: User Defined – Object Reports (Transcripts), Report Cards, Form Letters State or District System
28. 4. Years and Terms (Required) Create new term at each school Note: created automatically on live side Attendance Attendance code categories Attendance conversions FTEs ETC. Auto-generated calendar Start/End dates  Determine New Entry/Exit Dates
29. 5. Next School Indicator (Required) Determine which school student is to attend next year Must set each student’s indicator, individually or by groups by using Import Student Field Value group function DDA
30. 6. Next Year Grade (Required) Determine grade level for upcoming year Must set prior to running EOY process, individually or by groups Individually -- Scheduling Setup student screen Import to Update Sched_NextYearGrade field Student Field Value group function DDA
31. Sidetracks: Special Notes for Graduating Students How to prepare a student for graduation during the End of Year Process Ensure that a student will graduate Verify Graduated Students School Grade = 99 School = 999999
32. Sidetrack: Special Notes for Graduating Students Set the Next Year Grade and Next School Indicators for an individual student Select the student. Navigate to the Scheduling Setup student screen. Set the Next Year Grade field to: 99 Select Graduated Students from the Next School Indicator menu.  Submit your changes.
33. Sidetrack: Early Graduates (???? SIDENOTE?)(Dec/Jan) PowerSchool does not include a function that allows administrators to graduate a student early.  However, a workaround is available at PowerSource -- How to Graduate a Student Early Before EOY, (article #9586)
34. 7. Activities Know that all student activities are automatically carried forward to the next school year. Clear activities that should NOT move forward: Individually Groups – Clear Activies function located at Start Page > System Administrator > Clear Activities
35. 8. Default Grade Level for FTEs (Required) Verify default FTE for each grade level. Note: Student transfers must have assigned default FTE Access FTEs Select upcoming school year from TERM menu Navigate to Start Page > School Setup > Full-Time Equivalencies (FTE)
36. FTEs, Grade Levels, and the End-of-Year Process On "New FTE" and "Edit FTE" pages: checkboxes for "Default for these Grades" -- always unchecked by default. Checkbox determines which FTE assigned to when the End of Year process moves student from one grade level to another. Although names of FTEs in different years may be the same, each FTE record is unique to each school year.
37. FTEs, Grade Levels, and the End-of-Year Process Define "Default for these Grades" values for the upcoming school year's FTEs before running the End of Year process to close out the current school year Important Note: If grade level is not assigned to an FTE when the End of Year process runs, students moved into that grade level, either within the school or coming from another school, will not receive an FTE for the upcoming school year and will need to have one assigned manually.
38. 9. Scheduling If using PowerScheduler, commit the schedule to the live side. Method for moving from each school year to next: Scheduling/End-of-Year Process: PowerScheduler Build Load Split Year-Long Classes Commit Schedule PowerSchool Admin End-of-Year
39. 10. PowerTeacherGradebook Follow District Procedures To be continued
40. 11. Meal Transactions Follow District Procedures Your Backup / Archive of PS data files will allow you to go back to previous files if necessary.
41. 12. Historical Grades While the End of Year process does not modify or delete any stored grades, it is good practice to export these data at the end of each school year. Follow YOUR District Procedures
42. 13. Exit Codes (Required) Select an Exit Code for each type of student: Graduating, Promoted, and Retained The End-of-Year Process will assign these Exit Codes to each student's current enrollment based on a comparison of each student's Next School Indicator, current school, Next Grade Level, and current grade level.
43. 14. Exit Comments (Optional/Recommended) Select an Exit Comment for each type of student: Graduating, Promoted, and Retained. The End-of-Year Process will assign these Exit Comment to each student's current enrollment based on a comparison of each student's Next School Indicator, current school, Next Grade Level, and current grade level.
44. 15. Fee Transfer Method (Required) Select a fee transfer method. If the "Roll over the current balance" option is selected, any student with a non-zero balance for the current school year will be given a SOY (Start of Year) Balance in their fee transactions for the upcoming school year. If the "Zero the current balance" option is selected, students will start the upcoming school year with a zero balance for fee transactions. Note: This option does not affect student lunch balances.
45. 16. Validation (Required) PowerSchool's End-of-Year Process includes a validation mode, during which the system will evaluate student, school, and district information for End-of-Year readiness. PowerSchool's End-of-Year Process will not run unless all students and schools are properly configured for transfers into the upcoming school year.
46. 17. Validation (continued) To initiate the End-of-Year validation, you must do the following: Ensure that the box labeled "Check here to confirm that you really want to do this" is NOT checked. Click the "Perform End-of-Year Processing" button to initiate the End-of-Year validation process.
47. 18. Review/Correct Errors (Required) As the EOY validation process runs, various student or school-related errors may be displayed on the screen. Review and correct any errors that appear. The validation process may be repeated multiple times to check your progress while correcting student setup or school setup data.
48. 19. Review/ Correct – Common Errors List of common EOY error messages and instructions on how to correct them: Error: End-of-Year Process not completed. The following errors occurred: Smith, John:Next_School is blank Cause: The student named in this error message is not assigned a Next School Indicator. Solution: Assign the student a Next School Indicator on the Scheduling Setup student screen. Error: End-of-Year Process not completed. The following errors occurred: Smith, John: Next School is "High School" and next grade is 0, not 9 - 12 Cause: The student is assigned a Next Year Grade Level that is not taught at the student's Next School. Solution: If the student is already assigned to the correct Next School, correct the student's Next Year Grade on the Scheduling Setup student screen. If the student is assigned to a correct Next Year Grade, you may need to correct the student's Next School on the Scheduling Setup student screen.
49. 20. Review/ Correct – Common Errors Error: End-of-Year Process not completed. The following errors occurred: Smith, John:Next_School (123456) is not a valid school in this district.Next School is "High School" and next grade is 12, not 0 - 0 Cause: The student was assigned a Next School Indicator for a school number that doesn't exist in the District. The school name listed in the last line of this error message is the student's current school. Solution: This is often caused by an improperly configured Next School Indicator at the student's current school. First, verify that the Next School Indicators at the student's current school are all configured with a valid school number. Select the student's current school. Navigate to Start Page > School Setup > Next School. Review the numbers listed under the School Number column. If any school numbers do not exist on your server, correct or remove the erroneous Next School Indicator. A Next School Indicator may have ended up with an invalid school number due to an application issue described in article 7822. Once the Next School Indicators have been corrected at the student's current school, select the student and assign that student a valid Next School Indicator on the Scheduling Setup student screen.
50. 21. Review/ Correct – Common Errors Error: End-of-Year Process not completed. The following errors occurred: Smith, John:Grade Level is 99 and Next School Indicator is not "Graduated Students" Cause: A grade level of 99 is reserved for students in the Graduated Students school. If a student is assigned a Next Year Grade of 99 but is not assigned a Next School Indicator for the Graduated Students School (999999), the student will not be able to graduate. Solution: If the student is supposed to graduate, set the student's Next School Indicator to the Graduated Students school on the Scheduling Setup student screen. If the student is not supposed to graduate, then correct the student's Next Year Grade on the Scheduling Setup student screen.
51. 22. Review/ Correct – Common Errors Error: End-of-Year Process not completed. The following errors occurred: School 1 is not setup for next year. Cause: A school is setup for next year only after the year term has been created at Start Page > School Setup > Years and Terms. For instance, if a district is running the End of Year process to close out the 06-07 school year and a school does not have the 07-08 term setup at Start Page > School Setup > Years and Terms, the End of Year process will not proceed and this error message will appear. PowerSchool uses the term dates for the upcoming school year to determine the entry dates and exit dates for each student's upcoming school enrollment. Solution: Select the school that is not setup for next year and create the year term at Start Page > School Setup > Years and Terms.
52. 23. Review/ Correct – Common Errors Error: End-of-Year Process not completed. The following errors occurred: School 999999 is not setup for next year. Cause: This error message may appear when other schools are improperly setup for next year. Solution: There is no need to create any terms at the Graduated Students school in order to run the End of Year process. Once all other schools have been properly setup with a year term for the upcoming school year, this error message should no longer be displayed when running the End of Year validation.
53. 24. Review/ Correct – Common Errors Error: You did not check the confirm checkbox. End-of-Year Process will not continue. Cause: When running the End of Year process, if the "Check here to confirm that you really want to do this" box was not checked, then the End of Year process will not run. This error message is normal when running the End of Year validation process. Solution: It is only necessary to check the "Check here to confirm that you really want to do this" box if you are ready to run the End of Year process.
54. 25. Backup PS Data Once all validation errors have been corrected and the validation process no longer returns any errors, backup and archive your PowerSchool data file. Label this backup appropriately to indicate that all End-of-Year validation errors have been corrected. At this time, it is likely that no more changes are necessary before running the End-of-Year Process.
55. 26. EOY Process (Required) From the District office, navigate back to Start Page > System Administrator > End-of-Year Process.
56. 27. Verify Settings (Opt/Rec) Verify that the Exit Codes, Entry Codes, Exit Comments, and Fee Transfer Method are still set as they were before running the validation process.
57. 28. Confirmation (Required) Check the box labeled "Check here to confirm that you really want to do this."
58. 29. Start the EOY Process (Required) Click the "Perform End-of-Year Processing" button to initiate the End-of-Year Process. Be sure that the server is able to run uninterrupted (without being shut down) while this process runs through to completion (up to 4 hours). Note: If any schools or students are improperly setup for the End-of-Year Process, PowerSchool will halt the process and return errors. These errors must be corrected before the End-of-Year Process can run.
59. 30. EOY Process Complete As the End-of-Year Process runs, PowerSchool will display its progress on the screen. The following message will be displayed in your browser once the End-of-Year Process is complete: End-of-Year Process Complete
60. 31. Backup PS Data (Opt/Rec) Once the End-of-Year Process is complete, create and archive another backup of your PowerSchool data file. Label this backup appropriately to indicate that the End-of-Year Process has been completed. AND NOW Post Activities…
61. Rerunning the End-of-Year (EOY) Process NO "undo" function for changes made by the End-of-Year process If an attempt is made to re-run the End-of-Year process after it has already been completed, an error message will appear stating that the process has already been completed recently. Contact Pearson Premium Support if you have serious problems with your EOY process.
62. Rerunning the End-of-Year (EOY) Process (Continued) Workaround If a district must undo the changes done by the End-of-Year process, the PowerSchool administrator must revert the PowerSchool server to one of the data backups made before executing the End-of-Year process. Once the PowerSchool server has been restored to a state from before the End-of-Year process was run, the system administrator may re-run the End-of-Year process.

63. Post EOY Activities

    And you figured you were done…
64. 1. Years and Terms Verify that each school has correct start/end dates: Start Page > School Setup > Years and Terms
65. 2. Verify Student Enrollments Verify that each student has the correct entry and exit date for the school year. The End of Year process assigns each student a start and end date based on your year term.
66. 3. Periods Navigate to Start Page > School Setup > Periods Verify the number of periods for the upcoming school year at each school. Update the period names and abbreviations if necessary.
67. 4. Cycle Days Navigate to Start Page > School Setup > Days Verify the number of cycle days for the upcoming school year at each school Update the cycle day names and abbreviations if necessary
68. 5. Attendance Codes When creating a new year term, PowerSchool copies the attendance codes from the previous school year, eliminating the need to recreate attendance codes from scratch. If necessary update attendance codes at each school: Start Page > School Setup > Attendance Codes
69. 6. Attendance Code Categories When creating a new year term, PowerSchool copies the attendance code categories from the previous school year, eliminating the need to recreate attendance code categories from scratch. If necessary update attendance code categories at each school: Start Page > School Setup > Attendance Code Categories Note: in order to display tardies properly on the Quick Lookup, associate each tardy attendance code to the Tardy attendance code category.
70. 7. Attendance Conversions When creating a new year term, PowerSchool copies the attendance conversions from the previous school year, eliminating the need to recreate attendance conversions from scratch. If necessary update attendance conversions at each school: Start Page > School Setup > Attendance Conversions
71. 8. Full Time Equivalencies (FTEs) When creating a new year term, PowerSchool copies the FTE from the previous school year, eliminating the need to recreate the FTE from scratch. Ensure that the FTE is assigned a default attendance mode and a default attendance conversion.
72. 9. Attendance Preferences When creating a new year term, PowerSchool copies the attendance preferences from the previous school year, eliminating the need to redefine attendance preferences. Make any changes to the attendance preferences at each school at Start Page > School Setup > Attendance Preferences
73. 10. Bell Schedules When creating a new year term, PowerSchool copies the bell schedules from the previous school year, eliminating the need to recreate bell schedules from scratch. Modify bell schedules for each school at Start Page > School Setup > Bell Schedules Verify that each bell schedule is assigned an attendance conversion method.
74. 10. Bell Schedules Continued Determine which periods will occur in each bell schedule. Determine which periods count towards ADA calculations. If using the meeting/daily attendance bridge, indicate which period is the bridge period in each bell schedule. Avoid enrolling students into overlapping periods.
75. 11. Calendar Configure the school calendar at each school: Start Page > School Setup > Calendar Setup. Ensure that each in-session day is assigned a cycle day from the Day pop-up menu, a bell schedule from the Schedule pop-up menu, and an appropriate membership value.
76. 12. Reporting Segments If your school uses reporting segments, ensure that they are updated at each school with the correct dates: Start Page > School Setup > Reporting Segments
77. 13. Final Grade Setup Ensure that your final grade store codes/reporting terms are properly setup at each school: Start Page > School Setup > Final Grade Setups.
78. 13. Final Grade Setup (Continued) Final grade reporting terms are specific to the term in which they are created. For instance, a Q1 final grade reporting term setup for the Year term applies only to year long classes. This is differentfrom the Q1 final grade reporting term setup for the Semester 1 term which only applies to Semester 1 classes.
79. 14. Current Grade Display Update various grade display settings at each school Start Page > School Setup > Current Grade Display Here you can determine which final grades to display on the Quick Lookup, and whether to display current or historical grades.
80. 14. Current Grade Display (Continued) The Current Grade determines which store code is the current grade throughout the current school. (year?) The Parent/Student Access Term determines the data displayed in the public portal. Enter an appropriate term abbreviation. Your term abbreviations may or may not coincide with your final grade store codes.
81. 15. GPA Student Screens Update various settings at each school Start Page > School Setup > GPA Student Screens Select a GPA calculation method from the pop up menu to determine the GPA displayed at the bottom of the Quick Lookup student screen.
82. 15. GPA Student Screens (Continued) Update any data access tags (DATs) used for the Cumulative Info student screen. Some DATs on this page may have year or term-specific parameters which may need to be updated every year or every term.
83. 16. GPA Calculations If your district uses GPA calculations with year-specific parameters or query options, ensure that your GPA calculations are updated with new parameters that pertain to the current school year.
84. 17. Honor Roll Methods If your school's honor roll methods use year-specific GPA calculations, ensure that the honor roll methods at each school are updated to use GPA calculations that are setup for the current school year.
85. 19. Activities Create any new activities that will be offered in the upcoming school year. Activities can be created Start Page > School Setup > Activities Setup
86. 19. Activities (Continued) When specifying the field name of a new activity, ensure that you are using supported characters for a field name. PowerSchool supports letters, numbers, and the underscore (_). While other characters may be accepted by the application when creating the new activity, they may prevent students from properly enrolling in the activity.
87. Rerunning the End-of-Year (EOY) Process NO "undo" function for changes made by the End-of-Year process If an attempt is made to re-run the End-of-Year process after it has already been completed, an error message will appear stating that the process has already been completed recently. Contact Pearson Premium Support if you have serious problems with your EOY process.
88. Rerunning the End-of-Year (EOY) Process (Continued) Workaround If a district must undo the changes done by the End-of-Year process, the PowerSchool administrator must revert the PowerSchool server to one of the data backups made before executing the End-of-Year process. Once the PowerSchool server has been restored to a state from before the End-of-Year process was run, the system administrator may re-run the End-of-Year process.
89. Docs Stolen from Pearson to Create this PPT End of Year (EOY) Preparation (9497) Running the End of Year (EOY) Process (9498) FTEs, Grade Levels, and the End-of-Year Process (6401) Common End of Year (EOY) Validation Errors (9500) Post End of Year Activities (9501) How it Works: Special Programs (55160) How to Graduate a Student Early Before EOY(9586)