1 / 15

Single Event Transient (SET)

Single Event Transient (SET). Single Event Transient (SET). Fraction of a nanosecond to several nanoseconds. From Aerospace. Critical Transient Width vs Feature Size for Unattenuated Propagation. from Mavis. Heavy ion induced negative pulse.

wylie
Download Presentation

Single Event Transient (SET)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Single Event Transient(SET)

  2. Single Event Transient (SET) Fraction of a nanosecond to several nanoseconds. From Aerospace

  3. Critical Transient Width vs FeatureSize for Unattenuated Propagation from Mavis

  4. Heavy ion induced negative pulse Double Clocking As a Result of Heavy Ion Induced Pulse Cartoon of clock/logic upset. The device is most sensitive during the transition.

  5. Clock Upset Instrumentation Differential Error Counts Cumulative Error Counts

  6. Clock Upset Cross Section

  7. Frequency Dependenceof Clock Upset

  8. SET in PAL

  9. VCC CSRAM 1 Switch 1 Normally On A ‘High’ Node Contention current path OUT CSRAM 2 B ‘Low’ Node Switch 2 Normally Off Upset to ON GND Driver Contention Due to CSRAM Upset

  10. Heavy Ion Hit Transient Pulse Passed One Buffer Data In Mode 1 Transient Upset • Transient pulse higher than half VDC will propagate • Qcrit ~ 0.02pC, or LETth ~ 2MeV-cm2/mg for the worst case

  11. Heavy Ion Hit Hitting Leading Edge CSRAM Hitting Trailing Edge OUT IN Mode 2 Transient Upset (Scenario 1) Q • CSRAM switch is gating the data path. • Metastable (Transient) state in CSRAM due to SEU will modified the signal pulse. • Narrowed signal may disappear and widened signal may cause racing issue. • Hardening increases CSRAM metastable period

  12. Heavy Ion Hit CSRAM QB Q Normally ‘High’ Q A ‘Low’ QB OUT QB B ‘High’ Q Mode 2 Transient Upset (Scenario 2) • CSRAM switch control the MUX. • Metastable (Transient) state in CSRAM due to SEU will temporarily select the wrong input. • Hardening increases CSRAM metastable period.

  13. SET Summary: OMR185, 186 Objective: Provide 2.5V regulation for SX-S FPGAs VIN = 5.0V VOUT = 2.5V (set by resistor) Transient < 3V for CLoad of ~ 20 F Transient > 3V for CLoad of ~ 10 F

  14. Sample LVDO SET WaveformsVIN = 5V; VOUT = 2.5V, RLOAD = 22 OMR185_9924, CLoad: 4.7F OMR185_9924, CLoad: 9.4F

More Related