1 / 23

AB-PO-PH 2006-2008 Pulsed and High voltage converters

AB-PO-PH 2006-2008 Pulsed and High voltage converters. PS complex exploitation: active maintenance (documentation, improvement, spare), follow-up operation, physicist requirements

xarles
Download Presentation

AB-PO-PH 2006-2008 Pulsed and High voltage converters

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AB-PO-PH 2006-2008Pulsed and High voltage converters • PS complex exploitation: active maintenance (documentation, improvement, spare), follow-up operation, physicist requirements • I-LHC project: Pulsed, high voltage and commercial converters e-cooling, PS installation, commissioning, physicist requirements. • ISOLDE: New installation and follow-up the requirements • REX-ISOLDE: Power converters integration, interface PO/CO. • CNGS: Power converters (horn and reflector), commissioning. • CONSOLIDATION: power converters: PS (gamma-transition), Linac (dipoles, quadripoles , HT RF), PSB dipoles transfer • Stand test 3MeV( Linac 4): Follow-up requirement, CAT collaboration, installation stand test 3MeV. • Multiturn ejection: new lay-out bump 16 • Dump PS: section 47, 48. CTF3: power converter source laser. Responsibilities: AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  2. AB-PO-PH (Pulsed and High voltage converters )Team 2006 1 January 2006 1 June 2006 • CRAVERO Jean-Marc • DAVID Nicolas • De ALMEIDA MARTINS Carlos • JOFFE Stéphane • LAHAYE Joël • MATHIEU David • PARRA-LOPEZ Julien • SIMONET Gilles • ROYER Jean-Pierre Section Leader • CRAVERO Jean-Marc • DAVID Nicolas • JOFFE Stéphane • LAHAYE Joël • MATHIEU David • PARRA-LOPEZ Julien • ROYER Jean-Pierre • SIMONET Gilles • De ALMEIDA MARTINS Carlos Section Leader “transition douce” : For Carlos  knowledge different equipments, team and start-up converters in the complex PS under responsibility PO-PH. AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  3. AB-PO-PH 2006-2008Pulsed and High voltage converters • Exploitation, Operation, active maintenance (documentation, improvement, spare), follow-up operation, physicians requirements. • 2006: Linac2 ( protons), PSB (Booster), PS, ISOLDE, REX-ISOLDE, AD, LEIR, CTF3. (New start for PS and AD) • 2006: I-LHC commissioning: LEIR electron-cooling, LEIR ligne ETL, Linac3 spare OCEM and PS modifications. • 2006: CNGS commissioning (horn and reflector) • Piquet follow-up, 3 persons PO-PH in the piquet team (N. David, S. Joffe, J. Parra-Lopez) AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  4. AB-PO-PH 2006-2008Pulsed and High voltage converters • I-LHC ( linac3, LEIR,PS): Pulsed, high voltage and commercial power converters. 2006 installation and commissioning. • Pulsed dipoles5 HZ (14) , commissioning now (linac 3) • Pulsed quadripoles 5HZ (11), commissioning now (linac 3) • HV electron cooling and RF (19) -IT 3225 AB-LHC- (FUG) • HV RF power converters LEIR (2)- IT 3257 AB-LHC- (OCEM) • Commercial power converters 1Q (30) -PE 21785/AB- (Delta) • Commercial power converters 4Q (90)-IT 3262 AB- (Danfysik) • 2006:Pulsed septum ejection power converter (~ 40 kA, 2kV) • 2006:Pulsed septum injection PS, septum 26 (~20 kA, 2kV) • 2006:Power converter bump 26 PS (100A, 500V, 5msec) AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  5. AB-PO-PH 2006-2008Pulsed and High voltage converters I-LHC project AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  6. AB-PO-PH 2006-2008Pulsed and High voltage converters Ejection septum power supply (LEIR) AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  7. AB-PO-PH 2006-2008Pulsed and High voltage converters Injection PS SMH 26 Ejection LEIR SMH 40 AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  8. AB-PO-PH 2006-2008 Pulsed and High voltage converters ISOLDE: New installation in Isolde class A Lab (bat.179), Balzers Lab. (bat.26), RFQc (bat 275) 2006 : Installation before mars 2006 (see functional specification EDMS 585297) Budget ISOLDE 60 kFS installation Balzers lab, pumpstand 3 Station Degazage Work FSUs cabling, crate, installation : ~ 10 weeks Order DELTA power converters Concern: PLC AB-CO ? AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  9. AB-PO-PH 2006 -2008 Pulsed and High voltage converters ISOLDE: New installation in Isolde class A Lab (bat.179) and Balzers Lab. (bat.26) RFQc (bat 275) 2007-2008 : installation OFF-LINE 2 front-end test RFQc on line Budget ISOLDE ~ 290 kCHF (see functional specification) AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  10. AB-PO-PH 2006Pulsed and High voltage converters • REX-ISOLDE integration AB • ~ 146 power converters, 34 different types. • Rationalisation control-interface CO-PO, (first part Nov 2005-Mars 2006) • Regroupement et augmentation de la charge des faisceaux d’ions radioactifs en combinant TRAP et EBIS afin d’obtenir des faisceaux plus lourds (n+ q) AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  11. AB-PO-PH 2006-2008Pulsed and High voltage converters PARTIAL LAY-OUT REX-ISOLDE ( 2006 ) AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  12. AB-PO-PH 2006-2008Pulsed and High voltage converters • CNGS: power converters (horn and reflector); collaboration department PH. • 2006 Full operation and exploitation responsibility after commissioning • Electronic PO for the pulsed power converters horn and reflector. • Control interface 1553 and timing TG8 (CO). • Adaptation timing, internal software. • Adaptation hardware • Installation 2 power converters BA4 in progress ( responsibility department PH) • 2007-2008 Full responsibility of the 2 power converters. AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  13. AB-PO-PH 2006-2008Pulsed and High voltage converters AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  14. AB-PO-PH 2006-2008Pulsed and High voltage converters 4th NBI, 7 - 11 November 2003 courtesy Gilles MAIRE AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  15. AB-PO-PH 2006-2008Pulsed and High voltage converters • Consolidation: • Pulsed power converter for PS gamma-transition • Pulsed power converters for dipoles (15) Linac2 et (10) PSB. 2006 • Pulsed power converters for quad new proto (2006) for large series (80) Linac 2 (2007-2008) • CONSOLIDATION power converters: PS (gamma-transition) (8 ?), Linac (dipoles 20A 600V(30) , quadripoles 500A 1000V (80), HT 25kV 6A (2). AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  16. AB-PO-PH 2006-2008Pulsed and High voltage converters • Consolidation: PS gamma-transition Doublets: 1000A/-1000A in 0.7 ms, T pulse 60 ms Triplets: 500A in 54 ms linear part, T pulse 94 ms AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  17. AB-PO-PH 2006-2008Pulsed and High voltage converters • Stand test 3 MeV: follow-up  Linac4 (approval end 2006?) • Beam test 3 MeV beginning 2007 ? • Quad power converters (11), dipole power converters (2) • High power converters HT RF (2) collaboration CAT (12 power converters for Linac 4.) New requirement Source H-: 2 solenoids 1200A pulsed flat-top 800 microsec., 6 powers converters dipoles 8A DC, 1 bending measure 50A 35V. AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  18. AB-PO-PH 2006-2008Pulsed and High voltage converters • Stand test 3 MeVcollaboration CAT AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  19. AB-PO-PH 2006-2008Pulsed and High voltage converters (DRAFT) List of components whose supply has to be coordinated by CERN: 1- 15kV High frequency charging power supply (Commercial as suggested by CERN from a CERN supplier). 2- IGBT and SCR switch from BEHELKE/ Eupec/ ABB or others as per availability. 3- Storage capacitors from a European company. 4- Filament power supply. (Commercial as suggested by CERN) 5- Modulator anode DC supply. (Commercial as suggested by CERN) 6- Vacuum ion pump supply 7- Crow Bar switch assembly with detection and actuation electronics 8- Solenoid power supply for the klystron. 9- Control and interlock system as per CERN standard. Stand test 3 MeVcollaboration CAT AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  20. AB-PO-PH 2006-2008Pulsed and High voltage converters • Multiturn Ejection: reorganisation of the pulsed power converters for ejection 16.(Bump 16, etc..) foreseen start 2007 (to be confirmed) Proposed converter layout: new layout of the PS slow bump 16 Power converters specifications for the new bump16 for multi-turn extraction Budget: 235 kCHF 1 man/year (if QKE 58 not used as spare) AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  21. AB-PO-PH 2006-2008Pulsed and High voltage converters • Dump PS section 47 and 48 Studies in progress (35V 45A), installation for star-up 2006 (bat 365). • CTF3: power converter for laser system photo-injector 2007 ? 2008 ? AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  22. AB-PO-PH 2006-2008Pulsed and High voltage converters CONCERNS: • PLC:ecooling LEIR, ISOLDE, REX-ISOLDE People in PO-CC team ? Daniel ? When ? • New responsibility ? Responsibility Converters HT RF LHC Responsibility Converters HT RF PS (inverpower) Analysis HT power converters RF (divers type) • Future (stand test 3MeV, Linac4) Power converter HT for modulator, collaboration CAT Test necessary for the future (Linac 4) activity HT to be developed  2006 post engineer HT AB-PO-PH - 12.01.2006 J.P. Royer AB-PO-PH

  23. AB-PO-PH 2006-2008Pulsed and High voltage converters SECURITY Aspect important in this team: - Pulsed capacitors charged, high stored energy. - High Voltage absolute respect of security rules. AB-PO Review - 02.11.2005 J.P. Royer AB-PO-PH

More Related