1 / 3

Is this the correct orientation of the optical connector?

How many microswitches on the prototype?. Is this the correct orientation of the optical connector?. Do we attach all of this stuff at LBL?. Screws and bolts sizes? Do these exist?. Where to the blue things go And these other pieces?. Do we take this apart and use for The prototype?.

yanni
Download Presentation

Is this the correct orientation of the optical connector?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How many microswitches on the prototype? Is this the correct orientation of the optical connector?

  2. Do we attach all of this stuff at LBL? Screws and bolts sizes? Do these exist? Where to the blue things go And these other pieces? Do we take this apart and use for The prototype? How do you make gas seal here? This is held on by screwing on box?? What is the orientation of the trays? Have to drill out center. How tight? How is the optical connector attached? What screws into bottom of this?

  3. How do you attach the connector and what is the order of assembly?

More Related