1 / 2

Corridor width will be increased but not done yet. Please take as it is (as worst case)

Corridor width will be increased but not done yet. Please take as it is (as worst case). According to what you can find on the dwg , here it is the allowed conveyer path.

yepa
Download Presentation

Corridor width will be increased but not done yet. Please take as it is (as worst case)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Corridor widthwillbeincreased but not doneyet. Please take as it is (as worst case)

  2. According to what you can find on the dwg, here it is the allowed conveyer path. (taking 10 cm of margin on each side with respect to the facility layout), except at the location surrounded in red here. At this specific location, we have a material access door (MAD) where we know that maximum dimensions of equipment that can pass through is 1200 mm Therefore this the critical passage of the full path and we don’t take margin there otherwise the conveyer+ rack support width will be too small. N.B: The larger equipment to be transported is 1*1 m. For this reason the max dimensions of the transporter + rack support are as mentioned in the mail.

More Related