Airlive Smart Life IoT Training Setup V2

1. Airlive SmartLife IoT Training Setup V2

2. AirLive Smart Life AirLive Smart Life System not only provide home security but also provide Convenience for your life. The system allows users to monitor/control sensors or electronic equipment remotely or automatically.

3. What is Z-wave? • The Z-Wave protocol is an interoperable, wireless,  RF-based communications technology designed specifically for control, monitoring and status reading applications. • Z-Wave is by far the world market leader in wireless control, bringing affordable, reliable and easy-to-use 'smart' products to many millions of people in every aspect of daily life.

4. What is Z-wave?

5. Airlive IoT Kits • Gateway- interconnect the home communication network to other communication networks. Normally this is also the control network that is the medium that interconnects different devices. • Sensors- a device that generates information and delivers it to other devices • Smart Plug- devices that perform an action

6. Gateway

7. Sensors

8. Smart Plug

9. Airlive Smart Life APP • Easy to set up and manage • Drag and Drop user interface • Grouping sensors for different rooms • Scene management • IFTTT (IF This Then That)management • Scheduling management • Notification when sensor is triggered • Max. add 4 HD network camera • P2P easy network connection • Support multi language • Available on iOS / Android

10. Getting Started The Airlive IoT kits are plug and play. The initial setup only requires an internet connection and a Smartphone.

11. Smart Home Kit Example Setup and Installation SG-101 Z-Wave IP Gateway SI-101 3 in 1 sensor SP-101 Plug with Power Meter SI-102 PiR Motion sensor

12. Z-Wave IP Gateway The SG-101 Z-Wave IP Gateway can be connected wirelessly or wired to the Internet and via Z-wave it connects to all of your sensors so that you can receive notifications on mobile devices and also control your smart devices in your home or office.

13. Know your Gateway The following steps A,B,C,D. will show all the hardware connections and buttons on the SG-101. B. Side Connections A. Front USB slot 5Vdc Power White light LED for the Internet indications

14. Know your Gateway C. Green Lights LED indications

15. Know your Gateway D. Backside of Gateway WPS RJ45 Reset Tamper Switch Wall mount Holder

16. Installation Steps 1 2 3 1. Download the APP from App Store or Google Play Search for “Airlive Smart Life” Or Scan QR Code below

17. Installation 1 2 3 Connect the SG101 to your router via Ethernet cable Ethernet 5Vdc Power Note: when the network is built, green LED light No2 on the side will flash. And a white LED will burn on top of the gateway

18. Installation 1 2 3 Connect SG-101 to the Router by WPS when Ethernet cable is not used. Press the WPS button on the Router and SG-101 And it will build a network connection within 120 seconds. WPS 5Vdc Power Note: the white light LED will flash when WPS is making a connection.

19. Installation 1 2 3 Add the Gateway and access the main page Add the Gateway Main page

20. Gateway Setting Add Gateway Enter your any name you would like to call the Gateway. Customize gateway To fill up UID/ IP Address: Select either “QR Code” (scan QR code on the back of the Gateway) or “LAN Search” to locate your Gateway Press + Gateway The default password is “airlive” airlive

21. Scan QR code to add gateway into APP QR Code Scan using APP When scanning of the QR code fails' it is also possible to enter the UID manually by selecting Lan Search. The UID code can be found under the QR code. IMPORTANT: The phone and Gateway need to be in the same subnet.

22. Gateway Setting Edit/Delete/Change Password Edit : Edit the Gateway name Delete : Delete the Gateway Change Password : Change default password to personal password

23. Gateway Setting APP basic functions Sensors: All included sensors will be shown on the Sensors Tab, you can turn on/off each sensor in this tab. Rooms: Create different settings for rooms and group the sensors. Scenes: Make multiple actions such as turning on multiple lights at the same time. Macros: Set “IF -> Then” conditions. For example if the interior illumination is below a certain level the light will turn on. Schedules: Create activities at different times of the day. For example turn on the Stereo to play your favourite music when waking up.

24. Gateway Setting Include/Exclude/Add IP cam Include Device : include the devices Exclude Device : exclude the devices Security Include Device : include the devices Add Camera : add IP cam (Max. 4 cams) Setting : User/App/Gateway Information Notification : Turn on/off notifications

25. 3 in 1 Multi Sensor Include SI-101 1. Remove the small black pull tab. 2. While device is in inclusion mode, click on the “setting” icon and select “Include.” ** Sensor bought with kit is already Included and ready for use** Note: When plugged for the first time, it will automatically be in the inclusion mode, red light slowly flashing for 30 seconds.

26. Exclude SI-101 2. Press tamper key on the device 3 times then the red LED will flash. 3. Device excluded; then the device is in the inclusion mode. 1. Click on the “setting” icon and select “Exclude Device”. Note: when device excluded, it will automatically be in the inclusion mode, red light slowly flashing for 30 seconds.

27. Smart Plug withPower Meter Include SP-101 1. Plug the device into the outlet. 2. While device is including mode, click on the “setting” icon and select “Include.” SP-101 ** Smartplug bought with kit is already Included and ready for use**

28. Exclude SP-101 2. Press LED key on the plug 3 times then the red LED will flash. 3. Device excluded then the device is in the inclusion mode. 1. Click on the “setting” icon and select “Exclude”. Note: when device excluded, it will automatically be in the inclusion mode, red light slowly flashing for 30 seconds.

29. PiR Motion sensor Include SI-102 1. Open the sensor counter clockwise 2. Remove the small black pull tab. 3. While device is in including mode, click on the” setting” icon and select “Include.” ** Smartplug bought with kit is already Included and ready for use**

30. Exclude SI-102 2. Press Tamper key on the back of the sensor 3 times then the red LED will flash. 3. Device excluded then the device is in the inclusion mode. 1. Click on the “setting “icon and select “Exclude”. Note: when device excluded, it will automatically be in the inclusion mode, red light slowly flashing for 30 seconds.

31. Add IP Camera 1. Make sure the Camera is connected to Internet 2. Click on the setting icon and select “Add Camera” 3. Click on QR code to scan the code on the back of the camera. 4. Enter default password: airlive airlive SmartCube SC-300W

32. Mobile APP Airlive Smart Life APP • Easy to set up and manage with All Airlive Smart life products • Drag and Drop user interface • Grouping sensors for different rooms • Scene management • IFTTT management • Scheduling management • Notification when sensor is triggered • Max. add 4 IP network cameras • Max. 8 gateway connection within one APP • P2P easy network connection • Support multi language • Available on iOS and Android

33. Smart Home Kit

34. Use of APP and Sensors For more detailed information on the placement of the Sensors and the use of the functions on the APP. We will switch to the QIG’s for both. QIG Sensors http://fs.airlive.com/manual/AirLive_IOT_QIG.pdf http://fs.airlive.com/manual/AirLive_Smart_Life_IOT_installation_guide(ES).pdf QIG APP http://fs.airlive.com/manual/AirLive_IOT_QIG_2_v2.pdf