1 / 21

MBE Growth of Graded Structures for Polarized Electron Emitters

MBE Growth of Graded Structures for Polarized Electron Emitters. Aaron Moy SVT Associates, Eden Prairie, Minnesota. in collaboration with SLAC Polarized Photocathode Research Collaboration (PPRC): T. Maruyama, F. Zhou and A. Brachmann Acknowledgements : US Dept. of Energy SBIR

zaza
Download Presentation

MBE Growth of Graded Structures for Polarized Electron Emitters

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MBE Growth of Graded Structures for Polarized Electron Emitters Aaron Moy SVT Associates, Eden Prairie, Minnesota in collaboration with SLAC Polarized Photocathode Research Collaboration (PPRC): T. Maruyama, F. Zhou and A. Brachmann Acknowledgements: US Dept. of Energy SBIR contract #DE-FG02-07ER86329 (Phase I) contract #DE-FG02-07ER86330 (Phase I and II)

  2. Outline • Introduction to Molecular Beam Epitaxy • GaAsP Photocathode • AlGaAsSb Photocathode • AlGaAs/GaAs Internal Gradient Photocathode • Conclusion

  3. Epitaxy Growth of thin film crystalline material where crystallinity is preserved, “single crystal” Atomic Flux Bare (100) III-V surface, such as GaAs Deposition of crystal source material (e.g. Ga, As atoms)

  4. Result: Newly grown thin film, lattice structure maintained Starting surface

  5. Molecular Beam Epitaxy (MBE) • Growth in high vacuum chamber • Ultimate vacuum < 10-10 torr • Pressure during growth < 10-6 torr • Elemental source material • High purity Ga, In, Al, As, P, Sb (99.9999%) • Sources individually evaporated in high temperature cells • In situ monitoring, calibration • Probing of surface structure during growth • Real time feedback of growth rate

  6. Molecular Beam Epitaxy Growth Apparatus:

  7. MBE- In Situ Surface Analysis • Reflection High Energy Electron Diffraction (RHEED) • High energy (5-10 keV) electron beam • Shallow angle of incidence • Beam reconstruction on phosphor screen RHEED image of GaAs (100) surface

  8. H-Plasma Assisted Oxide Removal External view of ignited H-Plasma RHEED image of oxide removal from GaAs Substrate • Regular oxide removal with GaAs occurs at ~ 580 °C • With H-plasma, clean surface observed at only 460 °C

  9. MBE System Photo

  10. MBE- Summary • Ultra high vacuum, high purity layers • No chemical byproducts created at growth surface • High lateral uniformity (< 1% deviation) • Growth rates 0.1-10 micron/hr • High control of composition and thickness • Lower growth temperatures than MOCVD • In situ monitoring and feedback • Mature production technology

  11. MBE Grown GaN Photocathodes • Unpolarized emission • Very efficient, robust • Can be grown on SiC

  12. MBE Grown GaAsP SL • greater than 1% QE • achieved 86% polarization • material specific spin depolarization mechanism US Dept. of Energy SBIR Phase I and II contract #DE-FG02-01ER83332

  13. Antimony-based SLs for Polarized Electron Emitters • Develop structure based on AlGaAsSb/GaAs material • Sb has 3 orders lower diffusivity than Ga • Sb has higher spin orbit coupling than As

  14. Antimony-based SLs for Polarized Electron Emitters X-ray • Low QE measured for test samples (< 0.2%) • Confinement energy too high --> electrons trapped in quantum wells Band Alignment

  15. Internal Gradient SLs for Polarized Electron Emitters • Photocathode active layers with internal accelerating field • Internal field enhances electron emission for higher QE • Less transport time also reduces depolarization mechanisms • Gradient created by varied alloy composition or dopant profile

  16. Internal Gradient SLs for Polarized Electron Emitters With accelerating field No accelerating field • Order of magnitude decrease in transport time • Increased current density • Projected increase of 5-10% in polarization

  17. Internal Gradient GaAs/AlGaAs SLs for Polarized Electron Emitters 35% to 15% Aluminum grade Non-graded control

  18. Internal Gradient GaAs/AlGaAs SLs for Polarized Electron Emitters X-ray Characterization Simulation Measured Data

  19. Internal Gradient GaAs/AlGaAs SLs • Polarization decreased as aluminum gradient increased • Due to less low LH-HH splitting at low aluminum % • QE increased 25% due to internal gradient field • Peak polarization of 70 % at 740 nm, shorter than 875 nm of GaAs

  20. SBIR Phase II Internal Gradient SLs • Next Steps: • Further graded AlGaAs/GaAs photocathodes • Linear grading versus step grading • Doping gradient • Vary the doping level throughout the active region to generate the accelerating field • Doping gradient applied to GaAsP SL structure

  21. Conclusion • Applying capabilities of MBE to polarized photocathode emitters • AlGaAsSb photocathodes • SBIR Phase II for internal gradient photocathodes • Increase current extraction • Increase polarization

More Related