1 / 54

Electrical Safety

Electrical Safety. Cedric Dupont-Eisner M.D. Principles. Electricity is the flow of electrons Direct Current-electrons flow in 1 direction Alternating Current-electrons switch directions at regular intervals Capacitance The ability of a capacitor to store a charge. Principles. Principles.

zeal
Download Presentation

Electrical Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electrical Safety Cedric Dupont-Eisner M.D.

  2. Principles • Electricity is the flow of electrons • Direct Current-electrons flow in 1 direction • Alternating Current-electrons switch directions at regular intervals • Capacitance • The ability of a capacitor to store a charge.

  3. Principles

  4. Principles • Stray Capacitance/Capacitive Coupling • inherent in all electrical equipment. • Not designed into the system, but incidental to the equipment construction

  5. Principles

  6. Application: Electrical Shock • If electrical systems are not properly wired, persons can be subjected to electric shock.

  7. Application: Electrical Shock • People become injured and death occurs when voltage pushes electrons through the human body, particularly through the heart.

  8. Application: Electrical Shock • Damage from electrical current is due to disruption of normal electrical function of cells or dissipation of electrical energy into human bodies (increased temp->burn).

  9. Application: Electrical Shock • Macroshock-large amount of current flow that can cause harm or death

  10. Application: Electrical Shock • Microshock-small amounts of current flow. Dangerous only to electrically susceptible patients

  11. Application: Electrical Shock • DC-is less dangerous • AC-is more dangerous • 3x DC is needed for VFib • High frequency current have low tissue penetration and does not excite contractile cells • Low frequency current penetrates more

  12. Application: Electrical Shock • What levels of current (mA) is dangerous? • Remember 1,10,100 macro/100 micro • <1 mA = imperceptable to touch • 10 mA skeletal muscle shock (you can let go) • V Fib can be induced by: • 100 mA of macroshock • 100 μA (microamperes)of microshock current

  13. Application: Electrical Shock • THE MAX LEAKAGE ALLOWED IN OR EQUIPMENT IS 10 μA (microamperes)

  14. Grounding • Electrical Power Grounding can exist in two forms • GROUNDED • UNGROUNDED • Easy?

  15. Grounding • Think about your house: • 2 prong outlets = no ground • 3 prong outlets = grounded • Modern homes have a ground to reduce amount of shock

  16. Grounded Power

  17. Grounded Electrocution

  18. Why is equipment grounded? • Stray Capacitance/Capacitive Coupling: • Remember all equipment leaks a small amount of current • All OR equipment has 3 prong plug

  19. Ungrounding • The OR has many perils that make grounding impracticle. • Saline puddles • Power cords w/ tears in their insulation (colored part of cord) • Numerous electronic devices that  risk

  20. Ungrounding • This is where the questions are derived: • OR uses ungrounded power that is derived from Grounded utilities • ISOLATION TRANSFORMER is the answer…

  21. Isolated and Ungrounded

  22. Ungrounding: Isolated Power • Power source does not have a ground,the equipment is grounded • Isolated Power System provides protection from Macroshock. • Faulty equipment plugged into an isolated power system does not present a shock hazard.

  23. Ungrounded Safety

  24. LIM (Line Isolation Monitor) • Continuously monitors the potential for current flow from the isolated power supply to ground. • Determines the degree of isolation b\w 2 power wires and the ground. • Predicts the current flow.

  25. LIM (Line Isolation Monitor) • Alarm is activated if 2mA-5mA of current is detected. • Remember Macroshock vs. Microshock?

  26. Line Isolation Monitor

  27. Application: Electrical Shock • What levels of current (mA) is dangerous? • <1 mA = imperceptable to touch • Ventricular Fibrillation can be induced by: • 100 mA of macroshock • 100 μA (microamperes)of microshock current

  28. Application: Electrical Shock • SO LIM DOES NOT PROTECT AGAINST MICROSHOCK SINCE IT DETECTS 2mA-5mA

  29. LIM (Line Isolation Monitor) • Indicates the existence of a single problem (SINGLE FAULT) • Namely there is a problem with the ungrounded system becoming grounded • So we are back to regular home power • No chance for shock

  30. LIM (Line Isolation Monitor) • A second problem (TWO FAULTS) are required for SHOCK to occur. • A faulty piece of equipment-very likely at HH • Unsafe environment like electric device + pool of normal saline.

  31. Boards • LIM DOES NOT protect from MICROSHOCK, it warns of a POTENTIAL problem • If an LIM goes off, remove the last piece of equipment that was plugged in • In OR power source is ungrounded and equipment is grounded

  32. Electrocautery

  33. Electrocautery with Poor Contact

  34. QUESTIONS • The isolation monitor (LIM) on the wall of the operating room is to alert one to • Faulty drainage of static electricity from equipment to the conductive floor • The presence of equipment with a broken ground wire connection • An excessive load on the isolation transformer supplying the room • An excessive electrical leakage from either side of the power line to ground • Too low conductance in the floor.

  35. Answer • The isolation monitor (LIM) on the wall of the operating room is to alert one to • D - An excessive electrical leakage from either side of the power line to ground

  36. QUESTION • Electrocautery machines do not cause VF because the current they deliver differs from the electric current supplied by wall electrical outlets primarily by being: • DC instead of AC • Lower in voltage • Lower in frequency • Higher in frequency

  37. Answer • Electrocautery machines do not cause VF because the current they deliver differs from the electric current supplied by wall electrical outlets primarily by being: • D - Higher in frequency

  38. QUESTION • The LIM (line isolation monitor) • Measures leakage current flowing from patient to ground • Measures leakage current flowing from the electrical equipment to the patient • Sounds an alarm if the leakage current exceeds 50 mA • Measures the impedance between AC wiring and ground • Cuts off power to the circuit if a faulty piece of equipment is connected

  39. Answer • D • The LIM measures the impedance from the AC wiring of an isolated power system to ground and only sounds an alarm if current in excess of 2-5 mA could flow to ground.

  40. QUESTION • The isolated power supply system used in OR’s requires that: • The metal portions of the OR table be connected to earth ground • The patient be insulated from the metal portions of the OR table • Conductive flooring be used in the OR • A transformer be connected between electrical equipment in the OR and the electric power supplied by the utility company

  41. Answer • The isolated power supply system used in OR’s requires that: • D - A transformer be connected between electrical equipment in the OR and the electric power supplied by the utility company

  42. LIM

  43. QUESTION • Microshock hazard is increased in patients: • With a temporary pacing wire in place • In electrically operated beds • Receiving TPN via CVC • Who are in rooms with isolation transformers

  44. Answer • B • Both 1 and 3 can conduct electricity close to the heart and bypass the high resistance of the skin • 100 mA for VF in MACROSHOCK • 100 μA (microamperes) for VF in MICROSHOCK

  45. QUESTION • Operating rooms use an isolated power supply because: • Grounding cannot occur • Contact with both wires of the isolation transformer would cause no shock • Leakage current is zero • It affords protection against high amperage electrocution

  46. Answer • Operating rooms use an isolated power supply because: • 4 - It affords protection against high amperage electrocution • Remember LIM’s detect 2-5 mA (milli Ampres), a small amount of current

  47. QUESTION • A ground fault circuit interrupter: • Is almost never used in OR • Is foolproof method for preventing serious electrical shock • May be used in a grounded electrical system • Has both audio and visual alarms to indicate the presence of a ground fault

  48. Answer • B • A GFCI prevents current from flowing in a circuit when there is an imbalance in the current flowing in the two sides of the circuit. • Not used in OR b\c it would turn off life support equipment

  49. QUESTION • Leakage current: • Is harmless • Occurs b\c of the magnitude of the inductance b\w electrical conductors supplying equipment • Is of the DC type • Is unintentional flow of current from the internal wiring of a device

More Related