1 / 13

Intro to MicroControllers : Stellaris Launchpad

Intro to MicroControllers : Stellaris Launchpad. Class 4 : PCB Schematic Design & Board Layout. Topics for Today. Symbol + Package = Device Create Device / Libraries Net Names Pin Names Design Rule Check Board Layout (signal routing) PCB Fabrication Services. Device = Symbol + Package.

zeal
Download Presentation

Intro to MicroControllers : Stellaris Launchpad

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Intro to MicroControllers : Stellaris Launchpad Class 4: PCB Schematic Design & Board Layout

  2. Topics for Today • Symbol + Package = Device • Create Device / Libraries • Net Names • Pin Names • Design Rule Check • Board Layout (signal routing) • PCB Fabrication Services

  3. Device = Symbol + Package • Library = collection of Devices • Device = pairing of Symbol with Package • Symbol = Electrical Signal Property routing • Package = Physical copper contacts Package Symbol

  4. Schematic = All symbols

  5. Board Layout = Packages wired up Top Layer Bottom Layer Via

  6. Custom Part Creation • Create / Open Library • Create Symbol • CreatePackage • Create Device • Link Pinstogether on Schematic -> Package Note: make sure you have the library window in focus. For more detailed instructions see the instructable below. http://www.instructables.com/id/How-to-make-a-custom-library-part-in-Eagle-CAD-too/?ALLSTEPS

  7. Schematic • Focus on Library->Library->Symbol • Draw package, add pins, name pins and nets

  8. Package • Set grid to half smallest size • Use datasheet • Name pins • Name package, give value • NOTE: Show names / values, VERY IMPORTANT for later

  9. Device • Library in focus -> Library -> Device • Select Symbol, select Package (prev created) • Connect pins • Save

  10. Device creation the Easy Way • Copy Existing Parts • Open their libraries, cut, then open your library and paste.

  11. Board Layout • Do Schematic first • Generate board from Schematic • Route wires • Run DRC, fix errors

  12. Produce Board • Upload .board file to OSH Park • Review masks • Wait 2 weeks, • Vuala!

  13. Extras • Generate 3D image of board

More Related