1 / 55

CHAPTER 1: Physical quantities and measurements (3 Hours)

CHAPTER 1 PHYSICAL QUANTITIES AND MEASUREMENTS. CHAPTER 1: Physical quantities and measurements (3 Hours). UNIT FIZIK KOLEJ MATRIKULASI MELAKA. Learning Outcome:. 1.1 Physical Quantities and Units (1 hours). At the end of this chapter, students should be able to:

zelenia-jarvis
Download Presentation

CHAPTER 1: Physical quantities and measurements (3 Hours)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CHAPTER 1 PHYSICAL QUANTITIES AND MEASUREMENTS CHAPTER 1:Physical quantities and measurements(3 Hours) UNIT FIZIK KOLEJ MATRIKULASI MELAKA

  2. Learning Outcome: 1.1 Physical Quantities and Units (1 hours) At the end of this chapter, students should be able to: • State basic quantities and their respective SI units: length (m), time (s), mass (kg), electrical current (A), temperature (K), amount of substance (mol) and luminosity (cd). ( Emphasis on units in calculation) State derived quantities and their respective units and symbols: velocity (m s-1), acceleration (m s-2), work (J), force (N), pressure (Pa), energy (J), power (W) and frequency (Hz). • State and convert units with common SI prefixes.

  3. 1.1 Physical Quantities and Units • Physical quantity is defined as a ………………………………. • It can be categorized into 2 types • Basic (base) quantity • Derived quantity • Basic quantity is defined as ……………………………………………. • ……………………………………………………………………………….. • Table 1.1 shows all the basic (base) quantities. Table 1.1

  4. Derived quantity is defined as a quantity which can be expressed in term of base quantity. • Table 1.2 shows some examples of derived quantity. Table 1.2

  5. 1.1.1 Unit Prefixes • It is used for presenting larger and smaller values. • Table 1.3 shows all the unit prefixes. • Examples: • 5740000 m = 5740 km = 5.74 Mm • 0.00000233 s = 2.33  106 s = 2.33 s Table 1.3

  6. Example 1.1 : Solve the following problems of unit conversion. a. 15 mm2 = ? m2 b. 65 km h1 = ? m s1 c. 450 g cm3 = ? kg m3 Solution : a. 15 mm2 = ? m2 b. 65 km h-1 = ? m s-1 1st method :

  7. 2nd method : c. 450 g cm-3 = ? kg m-3

  8. Follow Up Exercise 1. A hall bulletin board has an area of 250 cm2. What is this area in square meters ( m2 ) ? 2. The density of metal mercury is 13.6 g/cm3. What is this density as expressed in kg/m3 3. A sheet of paper has length 27.95 cm, width 8.5 cm and thickness of 0.10 mm. What is the volume of a sheet of paper in m3 ? • Convert the following into its SI unit: • (a) 80 km h–1 = ? m s–1 • (b) 450 g cm–3 = ? kg m–3 • (c) 15 dm3 = ? m3 • (d) 450 K = ? ° C

  9. Learning Outcome: 1.2 Scalars and Vectors (2 hours) At the end of this chapter, students should be able to: a) Define scalar and vector quantities, b) Perform vector addition and subtraction operations graphically. c) Resolve vector into two perpendicular components (2-D) • Components in the x and y axes. • Components in the unit vectors in Cartesian coordinate.

  10. Learning Outcome: 1.2 Scalars and Vectors At the end of this topic, students should be able to: d) Define and use dot (scalar) product; e) Define and use cross (vector) product; Direction of cross product is determined by corkscrew method or right hand rule.

  11. 1.2 Scalars and Vectors • Scalar quantity is defined as a quantity with magnitude only. • e.g. mass, time, temperature, pressure, electric current, work, energy and etc. • Mathematics operational : ordinary algebra • Vector quantityis defined as a quantity with both magnitude & direction. • e.g. displacement, velocity, acceleration, force, momentum, electric field, magnetic field and etc. • Mathematics operational : vector algebra

  12. 1.2.1 Vectors Vector A Length of an arrow– magnitude of vector A • Table 1.4 shows written form (notation) of vectors. • Notation of magnitude of vectors. Direction of arrow – direction of vector A v (bold) a (bold) s (bold) Table 1.4

  13. Two vectors equal if both magnitude and direction are the same. (shown in figure 1.1) • If vector A is multiplied by a scalar quantity k • Then, vector A is • if k = +ve, the vector is in the same direction as vector A. • if k = -ve, the vector is in the opposite direction of vector A. Figure 1.1

  14. y 50 x 0 1.2.2 Direction of Vectors • Can be represented by using: • Direction of compass, i.e east, west, north, south, north-east, north-west, south-east and south-west • Angle with a reference line e.g. A boy throws a stone at a velocity of 20 m s-1, 50 above horizontal.

  15. y/m 5 x/m 0 1 • Cartesian coordinates • 2-Dimension (2-D)

  16. y/m 3 x/m 4 0 2 z/m • 3-Dimension (3-D)

  17. Unit vectors A unit vector is a vector that has a magnitude of 1 with no units. Are use to specify a given direction in space. i , j & k is used to represent unit vectors pointing in the positive x, y & z directions. | | = | | = | | = 1

  18. 150 + + - - • Polar coordinates • Denotes with + or – signs.

  19. 1.2.3 Addition of Vectors • There are two methods involved in addition of vectors graphically i.e. • Parallelogram • Triangle • For example : O O

  20. Triangle of vectors method: • Use a suitable scale to draw vector A. • From the head of vector A draw a line to represent the vector B. • Complete the triangle. Draw a line from the tail of vector A to the head of vector B to represent the vector A + B. Commutative Rule O

  21. If there are more than 2 vectors therefore • Use vector polygon and associative rule. E.g. Associative Rule

  22. Distributive Rule : a. b. • For example : Proof of case a:let  = 2 O

  23. O

  24. Proof of case b:let  = 2 and  = 1

  25. 1.2.4 Subtraction of Vectors • For example : O O

  26. Vectors subtraction can be used • to determine the velocity of one object relative to another object i.e. to determine the relative velocity. • to determine the change in velocity of a moving object. • Vector A has a magnitude of 8.00 units and 45 above the positive x axis. Vector B also has a magnitude of 8.00 units and is directed along the negative x axis. Using graphical methods and suitable scale to determine a) b) c) d) (Hint : use 1 cm = 2.00 units) Exercise 1 :

  27. y y    x x 0 0 1.2.5 Resolving a Vector • 2nd method : • 1st method :

  28. The magnitude of vector R : • Direction of vectorR : • Vector R in terms of unit vectors written as or

  29. N 30 60 W E S Example 1.2 : A car moves at a velocity of 50 m s-1 in a direction north 30 east. Calculate the component of the velocity a) due north. b) due east. Solution : or a) b)

  30. 150 x S y 150 30 x S Example 1.3 : A particle S experienced a force of 100 N as shown in figure above. Determine the x-component and the y-component of the force. Solution : or or

  31. y x O 30o 30o Example 1.4 : The figure above shows three forces F1, F2and F3 acted on a particle O. Calculate the magnitude and direction of the resultant force on particle O.

  32. y 30o 60o x 30o O Solution :

  33. Solution : Vector sum

  34. y 18 x O Solution : The magnitude of the resultant force is and Its direction is 162 from positive x-axis OR 18 above negative x-axis.

  35. y 37.0 x 0 Figure 1.2 Exercise 2 : • Vector has components Ax = 1.30 cm, Ay = 2.25 cm; vector has components Bx = 4.10 cm, By = -3.75 cm. Determine • the components of the vector sum , • the magnitude and direction of , • the components of the vector , • the magnitude and direction of . (Young & freedman,pg.35,no.1.42) ANS. : 5.40 cm, -1.50 cm; 5.60 cm, 345; 2.80 cm, -6.00 cm; 6.62 cm, 295 • For the vectors and in Figure 1.2, use the method of vector resolution to determine the magnitude and direction of • the vector sum , • the vector sum , • the vector difference , • the vector difference . (Young & freedman,pg.35,no.1.39) ANS. : 11.1 m s-1, 77.6; U think; 28.5 m s-1, 202; 28.5 m s-1, 22.2

  36. y 50 x 0 Figure 1.3 Exercise 2 : Vector points in the negative x direction. Vector points at an angle of 30 above the positive x axis. Vector has a magnitude of 15 m and points in a direction 40 below the positive x axis. Given that , determine the magnitudes of and . (Walker,pg.78,no. 65) ANS. : 28 m; 19 m Given three vectors P,Q and R as shown in Figure 1.3. Calculate the resultant vector of P,Q and R. ANS. : 49.4 m s2; 70.1 above + x-axis

  37. 1.2.6 Unit Vectors • notations – • E.g. unit vector a – a vector with a magnitude of 1 unit in the direction of vector A. • Unit vectors are dimensionless. • Unit vector for 3 dimension axes :

  38. y x z • Vector can be written in term of unit vectors as : • Magnitude of vector,

  39. y/m x/m 0 z/m • E.g. :

  40. Example 1.5 : Two vectors are given as: Calculate the vector and its magnitude, the vector and its magnitude, the vector and its magnitude. Solution : a) The magnitude,

  41. b) The magnitude, c) The magnitude,

  42. 1.2.7 Multiplication of Vectors Scalar (dot) product • The physical meaning of the scalar productcan be explained by considering two vectors and as shown in Figure 1.4a. • Figure 1.4b shows the projection of vector onto the direction of vector . • Figure 1.4c shows the projection of vector onto the direction of vector . Figure 1.4a Figure 1.4b Figure 1.4c

  43. From the Figure 1.4b, the scalar product can be defined as meanwhile from the Figure 1.4c, where • The scalar product is a scalar quantity. • The angle  ranges from 0 to 180 . • When • The scalar product obeys the commutative law of multiplication i.e. scalar product is positive scalar product is negative scalar product is zero

  44. y x z • Example of scalar product is work done by a constant force where the expression is given by • The scalar product of the unit vectors are shown below :

  45. Example 1.6 : Calculate the and the angle  between vectors and for the following problems. a) b) Solution : a) The magnitude of the vectors: The angle  , ANS.:3; 99.4

  46. y 25 x 19 0 Figure 1.5 Example 1.7 : Referring to the vectors in Figure 1.5, a) determine the scalar product between them. b) express the resultant vector of C and D in unit vector. Solution : a) The angle between vectors C and D is Therefore

  47. b) Vectors C and D in unit vector are and Hence

  48. RIGHT-HAND RULE Vector (cross) product • Consider two vectors : • In general, the vector product is defined as and its magnitude is given by where • The angle  ranges from 0 to 180  so the vector product always positive value. • Vector product is a vector quantity. • The direction of vector is determined by

  49. For example: • How to use right hand rule : • Point the 4 fingers to the direction of the 1st vector. • Swept the 4 fingers from the 1st vector towards the 2nd vector. • The thumb shows the direction of the vector product. • Direction of the vector product always perpendicular to the plane containing the vectors and . but

  50. y x z • The vector product of the unit vectors are shown below : • Example of vector product is a magnetic force on the straight conductor carrying current places in magnetic field where the expression is given by

More Related