1 / 28

FIRE PREVENTION TECHNICAL RULE FOR GASEOUS HYDROGEN TRANSPORT IN PIPELINES

Ministry of the Interior. University of Pisa. Italian National Fire Corps. Department of Mechanical, Nuclear and Production Engineering. FIRE PREVENTION TECHNICAL RULE FOR GASEOUS HYDROGEN TRANSPORT IN PIPELINES. Eng. Nicola Grasso, Eng. Nicola Mattei.

zihna
Download Presentation

FIRE PREVENTION TECHNICAL RULE FOR GASEOUS HYDROGEN TRANSPORT IN PIPELINES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ministry of the Interior University of Pisa Italian National Fire Corps Department of Mechanical, Nuclear and Production Engineering FIRE PREVENTION TECHNICAL RULE FOR GASEOUS HYDROGEN TRANSPORT IN PIPELINES Eng. Nicola Grasso, Eng. Nicola Mattei International Conference on Hydrogen Safety - San Sebastian, 13th of September 2007

  2. Summary • The Italian Working Group on the hydrogen fire prevention safety issues • to draw up the Italian fire prevention regulations on the hydrogen applications • The fire prevention technical rule for gaseous hydrogen transport in pipelines • main characteristics and instructions of the draft document • Experimental studies on hydrogen releases from pipelines - the H.P.B.T. (Hydrogen Pipe Break Test) apparatus • main characteristics, components and aims San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  3. WG on the H2 fire prevention safety issues • Formation: 2002, by the Ministry of the Interior • the Working Group is constituted by membersfrom both the Italian National Fire Corps (Technical Officials)and the academic world (University of Pisa) • Mission: to collect, assess, assemble all the technical and scientific contributions available in order to produce normative documents, guidelines, etc. expressly aimed at assuring the hydrogen fire prevention safety • Produced documents up to now: • D.M. 31st of August 2006, Fire prevention technical rule for gaseous hydrogen refuelling stations (O.J. of the Italian Republic n. 213 - 13th of September 2006) • A draft of guideline on the hydrogen vehicles components, with particular attention to the storage system (under the Ministry’s approval) • A draft of fire prevention technical rule for compressed hydrogen pipelines (officially presented to the Italian stakeholders) San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  4. Scheme of the draft document • The text follows the model of the fire prevention regulations for natural gas pipelines (D.M. 24/11/84 - Part 1); it has been properly adapted to the specificities connected with the hydrogen use: • Section 1General instructions • Section 2Pipelines for a maximum operating pressure greater than 0.5 MPa • Section 3Pipelines for a maximum operating pressure up to and including 0.5 MPa • Section 4Compression facilities • Section 5Pressure reduction facilities • Section 6Installations within the industrial areas • The instructions have been given consistently with those contained in the D.M. 31/08/2006 about the gaseous hydrogen refuelling stations. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  5. Draft index - Section 1 • Section 1 General instructions 1.1. Scope and field of application. 1.2. Terms and definitions. 1.3. Classification. 1.4. Technical delivery conditions. 1.5. Safety levels. 1.6. Electrical system, grounding system, protection system against atmospheric discharges. 1.7. Fire fighting protection system. 1.8. Detection and alarm systems. 1.9. Identification. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  6. Section 1(1) • Field of application: • The draft document covers the safety rules intended to regulate the systems for the compressed gaseous hydrogen transport and delivery by means of pipelines, from the production facilities to the consumer sites; these safety rules also apply to the installations within the industrial areas. The hydrogen production facilities shall be the subject of a specific risk analysis (D.M. 04/05/1998 - annex I). • Pipeline: • a pipeline is defined as an assembly of pipes, valves, curves, fittings and other special components which are putted together in order to transport and delivery compressed gaseous hydrogen. • Pipes, valves, curves, fittings and other special components used in the hydrogen pipelines shall be designed, constructed and tested in accordance with the requirements of the Pressure Equipment Directive (PED) 97/23/EC, as applicable; anyhow, they shall be manufactured and tested on the basis of suitable specified standards. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  7. Section 1(2) • The instructions are provided according to the maximum operating pressure of the system which is defined as the maximum gauge pressure [MPa] for the system operation : a) Class 1: pipelines for a maximum operating pressure greater than 2.4 MPa up to and including 3.0 MPa. b) Class 2: pipelines for a maximum operating pressure greater than 1.2 MPa up to and including 2.4 MPa. c) Class 3: pipelines for a maximum operating pressure greater than 0.5 MPa up to and including 1.2 MPa. d) Class 4: pipelines for a maximum operating pressure greater than 0.15 MPa up to and including 0.5 MPa. e) Class 5: pipelines for a maximum operating pressure greater than 0.05 MPa up to and including 0.15 MPa. f) Class 6: pipelines for a maximum operating pressure greater than 0.004 MPa up to and including 0.05 MPa. g) Class 7: pipelines for a maximum operating pressure up to and including 0.004 MPa. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  8. Draft index - Section 2 and 3 • Section 2 Pipelines for a maximum operating pressure greater than 0.5 MPa 2.1. Materials. 2.2. Pipes thickness. 2.3. Dissections, operating pressure control and operating flow rate control. 2.4. Pipe-laying. 2.5. Pipeline testing. 2.6. Protection against corrosion. • Section 3 Pipelines for a maximum operating pressure up to and including 0.5 MPa 3.1. Materials. 3.2. Pipes thickness. 3.3. Dissections, operating pressure control and operating flow rate control. 3.4. Pipe-laying. 3.5. Pipeline testing. 3.6. Protection against corrosion. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  9. Section 2 and 3(1) 1. Use of suitable materials • Pipes, valves, curves, fittings and other special components used for the manufacturing of hydrogen pipelines shall be of metallic material. These materials shall be in accordance with the requirements of the Pressure Equipment Directive (PED) 97/23/EC (annex I, point 4) and with the instructions of ISO/TR 15916 and IGC Doc 121/04/E. Material accordance shall be attested by the supplier on its own responsibility. 2. Connections of the components • The connections of valves, curves, fittings and other special components can be realized by a flange coupling, a butt welding or a thread coupling (the latter only for pipelines belonging to the Classes 4, 5, 6 and 7). The isolation valves shall be in preference ball valves. 3. Pipes thickness • Formulas are provided depending on the design pressure, the pipe diameter and the material properties. However, a minimum thickness has to be assured; it is specified by the technical rule itself. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  10. Section 2 and 3 (2) 4. Dissections • The pipelines should be dissected by intercepting devices. The intercepting devices should be located in order to be easily attainable. The section lengths depend on the pipeline Class. Each section shall be provided with suitable discharging devices; they are intended to empty the section quickly by manual activation; criteria for their location are specified. 5. Operating pressure control • Besides the main pressure reducer, a suitable safety device (e.g. second pressure reducer in series or locking device, etc.) and an automatic device for the discharging into atmosphere shall avoid the exceeding of the maximum operating pressure. They shall be installed at the head of the each pipeline section; their setting values depend on the pipeline Class. 6. Operating flow rate control • Suitable excess flow devices shall avoid the exceeding of the maximum operating flow rate. They shall be installed at the head of each pipeline section. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  11. Section 2 and 3(3) 7. Pipe-laying - Depth of the burial • The pipelines shall be buried as a rule; the depth of the burial depends on the pipeline Class. In special cases specified by the text, a pipeline can be buried at lower depth or even located aboveground. The location aboveground is allowed in case of clear technical difficulties (e.g. crossing of watercourses or unstable soils). 8. Pipe-laying - Parallelisms and crossings • Instructions are provided in case of a pipeline parallelism or crossing with railway lines, urban or suburban tramlines, national and provincial roads, motorways, watercourses and pre-existent canalizations (e.g. for electric and telephone cables, sewerage systems, etc.). They mainly consist of safety distances and use of protection tubes. 9. Pipe-laying - Safety distances from buildings • As regards the pipe-laying of the Classes 1, 2 and 3, the minimum safety distances from buildings are set by means of a suitable table depending on the maximum operating pressure, the pipe diameter, the type of protection system and the pipe-laying conditions. As regards the Classes 4 and 5, the minimum safety distances are set depending on the only pipe-laying conditions. As regards the Classes 6 and 7, minimum safety distances are not provided. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  12. Section 2 and 3(4) 10. Pipe-laying - Pipelines junctions • The pipe junction performed to assemble a pipeline at the installation location shall be carried out by a fusion welding (a specified percentage of the joints shall be inspected with nondestructive techniques and the relevant test report shall be produced). Use of a flange, thread or different special coupling shall be reduced to a minimum (the suitable documentation shall be presented). 11. Pipeline testing • After the pipe-laying, the pipeline sections shall be pressure tested. The pressure test should be performed hydraulically but the use of air or inert gases can be allowed; the test values depend on the pipeline Class. The requirements for a favourable test are specified. 12. Protection against corrosion • The buried pipelines shall be provided with a protective coating against the aggressive actions from the environment where they are located and against corrosion from natural and stray electrical currents; the cathode protection shall be applied during the operation to increase the protective action coming from the coating. The pipelines stretches installed at the open air shall provided with protective coatings or paintings against the atmospheric corrosion from the environment where they are located. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  13. Draft index - Section 4 and 5 • Section 4 Compression facilities 4.1. Facilities with an outlet pressure greater than 1.2 MPa up to and including 3.0 MPa. • Section 5 Pressure reduction facilities 5.1. Facilities with an inlet pressure greater than 2.4 MPa up to and including 3.0 MPa. 5.2. Facilities with an inlet pressure greater than 1.2 MPa up to and including 2.4 MPa. 5.3. Facilities with an inlet pressure greater than 0.5 MPa up to and including 1.2 MPa. 5.4. Facilities with an inlet pressure up to and including 0.5 MPa. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  14. Section 4 and 5 a) Location and construction of the premises containing the systems: • 1st or 2nd level safety features and installation in enclosed areas (with some exceptions) b) Safety of the main gas system (the safety measures are essentially those provided for the pipelines): • junction of the circuit components by a fusion welding or flange couplings, thread couplings and other special couplings if the strength and tightness requirements are met and the documentation attesting their suitability is provided • use of suitable materials and suitable tubes thickness • pressure testing of the gas system in order to check the suitability of the junctions; it is performed by a hydraulic test • protection against corrosion • gas flow interception by means of devices easily attainable • operating pressure control and operating flow rate control c) Monitoring by means of a hydrogen detection system, a smoke detection system and a flame detection system connected to a suitable alarm system. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  15. Draft index - Section 6 • Section 6 Installations within the industrial areas 6.1. Components and general instructions. 6.2. Compression facility. 6.3. Feeding line. 6.4. Pressure reduction and measurement facility. 6.5. Adduction network. • The installations within the industrial areas usually consist of the above-mentioned systems. They shall be designed, constructed and tested according to the instructions of the previous Sections. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  16. Section 6 • If the maximum operating pressure is greater than 0.5 MPa, the installations within the industrial areas shall be the subject of a specific risk analysis (D.M. 04/05/1998 - annex I). • the location of the facilities, the route of the feeding line and the route of the adduction network shall be evaluated consistently with the results from the risk analysis. • In this case the risk analysis is considered an essential tool: specific instructions cannot be provided in view of the different and not foreseeable system layouts within an industrial area. • The following documents shall be available at the installations within the industrial areas: • the operating manual containing the instructions intended to operate and make safe the facilities • the simplified flow diagram of the installations • the plan of the delivering lines with the mark of the critical facilities in the neighbourhood San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  17. H.P.B.T. apparatus Hydrogen Pipe Break Test The experimental apparatus named H.P.B.T. is intended to investigate the behaviour of hydrogen leakages from pipelines. The main purpose is the simulation of a sudden, low pressure release into free air, the ignition of hydrogen-air mixture and the consequent combustion. The experimental activity will provide technical information about the hydrogen diffusivity into free air and the ignition consequences. The experimental activity will also provide useful information in order to validate the calculation models currently used for a hydrogen release from pipelines. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  18. H.P.B.T. apparatus Apparatus layout The apparatus consists of four parts: • High pressure gas storage • Gas tanks (test pressure) • Pipeline system • Vent line San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  19. H.P.B.T. apparatus Apparatus layout High pressure gas storage. Two sets of high pressure gas storage: the first one contains hydrogen, the second one contains nitrogen. The initial pressure is equal to 20 MPa. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  20. H.P.B.T. apparatus Apparatus layout Gas tanks. Four large storage tanks (3 m3 each) that allow a maximum pressure of 10 bar. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  21. H.P.B.T. apparatus Apparatus layout Pipeline system. A pipe of 4 in (0.102 m) in diameter and 50 m long starts from the gas tanks and moves away toward a large free area. It is provided with an automatic release system at the far end. This system houses the orifice through which the hydrogen is released. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  22. H.P.B.T. apparatus Apparatus layout Vent line. A pipe of 2 in (0.0508 m) in diameter and 6 m high; it is used to dispel the gas when necessary. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  23. H.P.B.T. apparatus Apparatus layout A - High pressure gas storage B - Gas tanks C - Pipeline system D - Vent line E - Laboratory buildings San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  24. H.P.B.T. apparatus Experimental test Before filling the apparatus with hydrogen, the air is removed by nitrogen. When the hydrogen pressure inside the tanks has reached the value set for the test, the automatic release system is turned on and let the gas flow out of the orifice until the pressure inside the tanks drops to a value previously chosen. Two different kinds of test can be accomplished: • the hydrogen is simply released • afterwards, the release is ignited by a sparkle San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  25. H.P.B.T. apparatus Experimental test The following parameters can be changed during the tests: • orifice size: e.g. Ø 5 - 11 - 22 mm • angle of release: discrete variation of 45° starting from the vertical direction • internal pressure: up to 1 MPa • release time: it depends on the orifice size and the internal pressure (60 s < t < 240 s) San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  26. H.P.B.T. apparatus Experimental test It will be possible to acquire the following data: • gradient of hydrogen concentration in air • atmospheric conditions (temperature, wind speed and direction, humidity) • flame temperature (in case of ignition) Thermocameras and videocameras will be used to film the phenomena in various conditions. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  27. Conclusions • The prospective development and diffusion of the systems for the hydrogen production, storage and delivery have to deal with the specific safety issues relevant to design, construction and operation of the lines for the gas transfer. • The Italian Working Group on the hydrogen fire prevention safety issues has drawn up a proper draft of technical rule beginning from the standard model covering the natural gas pipelines. • The selection of suitable materials and the hydrogen releases are the new, main safety issues from the fire prevention point of view. • For the first issue, the standards and regulations in force provide a number of useful requirements and information in order to deal with the proper selection. • For the second issue, a specific apparatus, named H.P.B.T. (Hydrogen Pipe Break Test) has been designed and installed at the laboratories of the University of Pisa. The experimental data will be useful not only for the completion of the technical rule but also for the comparison with theoretical and computational release models. San Sebastian - 13/09/2007 Fire prevention technical rule for hydrogen pipelines

  28. Thankyou ! nicola.ciannelli@vigilfuoco.it n.grasso@ing.unipi.it

More Related