Introduction to Wireless Sensor Networks - System Architecture of Networked Sensor Platforms and Applications

1. Introduction to Wireless Sensor Networks • -System Architecture of Networked • Sensor Platforms and Applications

2. Sensor Networks Wireless sensor networks consists of group of sensor nodes to perform distributed sensing task using wireless medium. Characteristics- low-cost, low-power, lightweight - densely deployed - prone to failures - two ways of deployment: randomly, pre-determined or engineered Objectives-Monitor activities- Gather and fuse information - Communicate with global data processing unit

3. Sensor Networks Application Areas [Akyildiz+ 2002] • Military: • Monitoring equipment and ammunition • Battlefield surveillance and damage assessment • Nuclear, biological, chemical attack detection and reconnaissance • Environmental: • Forest fire / flood detection • Health: • Tracking and monitoring doctors and patients inside a hospital • Drug administration in hospitals

4. Sensor Networks Application Areas [Akyildiz+ 2002] • Home: • Home automation • Smart environment • Other Commercial Applications: • Environmental control in office buildings • Detecting and monitoring car thefts • Managing inventory control • Vehicle tracking and detection

5. Sensor Networks Preliminaries • For large scale environment monitoring applications, dense sensor networks are mainly used • Sensing capabilities should be distributed and coordinated amongst the sensor nodes • Algorithms deployed should be localized since transmissions between large distances are expensive and lowers networks life time • These networks should be self-configuring, scalable, redundant and robust during topology changes

6. Research Problems in Sensor Networks • Clustering • Partitioning of the network • Identification of vital nodes (clusterheads) • Routing • Discovering routes from source to destination • Maintaining the routes • Rediscovery and repair of routes • Topology management • Maintain the links • Minimize the changes in underlying graph • Security

7. Research Problems in Ad hoc and Sensor Networks • Medium Access Control Protocols • Sensor data management • Power conservation/energy consumption • Data fusion and dissemination of sensor data • New applications for ad hoc and sensor networks

8. Why Sensor Platforms? • Compared to analysis and simulation techniques, designing a system platform has the following advantages: • Provides genuine executive environment: various proposed algorithms can be exactly evaluated; good way to examine existing design principles and discover new ones under different configurations • More attention can be focused on the application-layer • A real system platform can accelerate the pace of research and development

9. General WSN System Architecture • Constructing a platform for WSN falls into the area of embedded system development which usually consists of developing environment, hardware and software platforms. • Hardware Platform Consists of the following four components: a) Processing Unit Associates with small storage unit (tens of kilo bytes order) and manages the procedures to collaborate with other nodes to carry out the assigned sensing task b) Transceiver Unit Connects the node to the network via various possible transmission medias such as infra, light, radio and so on

10. General WSN System Architecture • Hardware Platform c) Power Unit Supplies power to the system by small size batteries which makes the energy a scarce resource d) Sensing Units Usually composed of two subunits: sensors and analog-to-digital Converters (ADCs). The analog signal produced by the sensors are converted to digital signals by the ADC, and fed into the processing unit e) Other Application Dependent Components Location finding system is needed to determine the location of sensor nodes with high accuracy; mobilizer may be needed to move sensor nodes when it is required to carry out the task

11. General WSN System Architecture • Software Platform Consists of the following four components: a) Embedded Operating System (EOS) Manages the hardware capability efficiently as well as supports concurrency-intense operations. Apart from traditional OS tasks such as processor, memory and I/O management, it must be real-time to rapidly respond the hardware triggered events, multi-threading to handle concurrent flows b) Application Programming Interface (API) A series of functions provided by OS and other system-level components for assisting developers to build applications upon itself

12. General WSN System Architecture • Software Platform c) Device Drivers A series of routines that determine how the upper layer entities communicate with the peripheral devices d) Hardware Abstract Layer (HAL) Intermediate layer between the hardware and the OS. Provides uniform interfaces to the upper layer while its implementation is highly dependent on the lower layer hardware. With the use of HAL, the OS and applications easily transplant from one hardware platform to another

13. Berkeley Motes [Hill+ 2000] • Motes are tiny, self-contained, battery powered computers with radio links, which enable them to communicate and exchange data with one another, and to self-organize into ad hoc networks • Motes form the building blocks of wireless sensor networks • TinyOS [TinyOS], component-based runtime environment, is designed to provide support for these motes which require concurrency intensive operations while constrained by minimal hardware resources Figure 3: Berkeley Mote

14. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • Introduction • Habitat and environmental monitoring represent essential class of sensor network applications by placing numerous networked micro-sensors in an environment where long-term data collection can be achieved • The sensor nodes perform filtering and triggering functions as well as application-specific or sensor-specific data compression algorithms thru the integration of local processing and storage • The ability to communicate allows nodes to cooperate in performing tasks such as statistical sampling, data aggregation, and system health and status monitoring • Increased power efficiency assists in resolving fundamental design tradeoffs, e.g., between sampling rates and battery lifetimes

15. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • Introduction • The sensor nodes can be reprogrammed or retasked after deployment in the field by the networking and computing capabilities provided • Nodes can adapt their operation over time in response to changes in the environment • The application context helps to differentiate problems with simple and concrete solutions from open research areas • An effective sensor network architecture and general solutions should be developed for the domain • The impact of sensor networks for habitat and environmental monitoring is measured by their ability to enable new applications and produce new results

16. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • Introduction • This paper develops a specific habitat monitoring application, but yet a representative of the domain • It presents a collection of requirements, constraints and guidelines that serve as a basis for general sensor network architecture • It describes the core components of the sensor network for this domain– hardware and sensor platforms, the distinct networks involved, their interconnection, and the data management facilities • The design and implementation of the essential network services – power management, communications, re-tasking, and node management can be evaluated in this context

17. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • Habitat Monitoring • Researchers in the Life Sciences are concerned about the impacts of human presence in monitoring plants and animals in the field conditions • It is possible that chronic human disturbance may adversely effect results by changing behavioral patterns or distributions • Disturbance effects are of concern in small island situations where it may be physically impossible for researchers to avoid some impact on an entire population • Seabird colonies are extreme sensitive to human disturbance • Research in Maine [Anderson 1995], suggests that a 15 minute visit to a cormorant colony can result in up to 20% mortality among eggs and chicks in a given breeding year. Repeated disturbance can lead to the end of the colony

18. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • Habitat Monitoring • On Kent Island, Nova Scotia, research learned that Leach’s Storm Petrels are likely to desert their nesting burrows in case of disturbance during the first two weeks of incubation • Sensor networks advances the monitoring methods over the traditional invasive ones • Sensors can be deployed prior to the breeding season or other sensitive period or while plants are dormant or the ground is frozen on small islets where it would be unsafe or unwise to repeatedly attempt field studies • Sensor network deployment may be more economical method for conducting long-term studies than traditional personnel-rich methods • A “deploy ‘em and leave ‘em” strategy of wireless sensor usage would decrease the logistical needs to initial placement and occasional servicing

19. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • Great Duck Island • The College of Atlantic (COA) is field testing in-situ sensor networks for habitat monitoring • Great Duck Island (GDI) is a 237 acre island located 15 km south of Mount Desert Island, Maine • At GDI, three major questions in monitoring the Leach’s Storm Petrel [Anderson 1995]: • What is the usage pattern of nesting burrows over the 24-72 hour cycle when one or both members of a breeding pair may alternate incubation duties with feeding at sea? • What changes can be observed in the burrow and surface environmental parameters during the course of the approximately 7 month breeding season (April-October)?

20. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • Great Duck Island • What are the differences in the micro-environments with and without large numbers of nesting petrels? • Presence/absence data is obtained through occupancy detection and temperature differentials between burrows with adult birds and burrows that contain eggs, chicks, or are empty • Petrels will most likely enter or leave during the daytime; however, 5-10 minutes during late evening and early morning measurements are needed to capture the entry and exit timings • More general environmental differentials between burrow and surface conditions can be captured by records every 2-4 hours during the extended breeding season; whereas, the differences between “popular” and “unpopular” sites benefit from hourly sampling

21. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • Great Duck Island Requirements • Internet Access • The sensor networks at GDI must be accessible via the Internet since the ability to support remote interactions with in-situ networks is essential • Hierarchical Network • Habitats of interest are located up to several kilometers away. A second tier of wireless networking provides connectivity to multiple patches of sensor networks deployed at each of the areas. • Sensor Network Longevity • Sensor networks that runs for several month from non-rechargeable power sources would be desirable since studies at GDI can span multiple field seasons

22. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • Great Duck Island Requirements • Operating off-the grid • Every level of the network must operate with bounded energy supplies • Renewable energy such as solar power may be available some locations, disconnected operation is a possibility • GDI has enough solar power that run the application 24x7 with small probabilities of service interruptions due to power loss • Management at-a-distance • Remoteness of the field sites requires the ability to monitor and manage sensor networks over the Internet. The goal is no on-site presence for maintenance and administration during the field season, except for installation and removal of nodes

23. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • Great Duck Island Requirements • Inconspicuous operation • It should not disrupt the natural processes or behaviors under study • Removing human presence from the study areas would eliminate a source of error and variation in data collection and source of disturbance • System behavior • Sensor networks should present stable, predictable, and repeatable behavior at all times since unpredictable system is difficult to debug and maintain • Predictability is essential in developing trust in these new technologies for life scientists

24. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • Great Duck Island Requirements • In-situ interactions • Local interactions are required during initial development, maintenance and on-site visits • PDAs can be useful in accomplishing these tasks – they may directly query a sensor, adjust operational parameters and so on • Sensors and sampling • The ability to sense light, temperature, infrared, relative humidity, and barometric pressure are essential set of measurements • Additional measurements may include acceleration/vibration, weight, chemical vapors, gas concentrations, pH, and noise levels

25. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • Great Duck Island Requirements • Data archiving • Sensor readings must be achieved for off-line data mining and analysis • The reliable offloading of sensor logs to databases in the wired, powered infrastructure is essential • It is desirable to interactively “drill-down” and explore sensors in near real-time complement log-based studies. In this mode of operation, the timely delivery of sensor data is the key • Nodal data summaries and periodic health-and-status monitoring also requires timely delivery of the data

26. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • System Architecture • A tiered architecture is developed • The lowest level consists of the sensor nodes that perform general purpose computing and networking as well as application-specific sensing • The sensor nodes may be deployed in dense patches and transmit their data through the sensor network to the sensor network gateway • Gateway is responsible for transmitting sensor data from the sensor patch through a local transit network to the remote base station that provides WAN connectivity and data logging • The base station connects to database replicas across the internet • At last, the data is displayed to researchers through a user interface

27. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • System Architecture Figure 1: System architecture for habitat monitoring

28. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • System Architecture • The autonomous sensor nodes are placed in the areas of interest where each sensor node collects environmental data about its immediate surroundings • Since these sensors are placed close to the area of interest, they can be built using small and inexpensive individual sensors – high spatial resolution can be achieved through dense deployment of sensor nodes • This architecture offers higher robustness compared to traditional approaches which use a few high quality sensors with complex signal processing • The computational module is a programmable unit that provides computation, storage and bidirectional communication with other nodes

29. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • System Architecture • The computational module interfaces with the analog and digital sensors on the sensor module, performs basic signal processing and dispatches the data according to the needs of the application • Compared to traditional data logging systems, networked sensors offer two main advantages: they can be re-tasked in the field and they can communicate with the rest of the system • In-situ re-tasking gives researchers the ability to refocus their observations based on the analysis of the initial results – initially, absolute temperature readings are desired, after a while, only significant temperature changes exceeding a threshold may become more useful

30. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • System Architecture • Individual sensor nodes communicate and coordinate with one another • These nodes form a multi-hop network by forwarding each other’s messages and if needed, the network can perform in-network aggregation (e.g., relaying the average temperature across the region) • Eventually, data from each sensor needs to be propagated to the Internet • The propagated data may be raw, filtered or processed data • Since direct wide area connectivity cannot be brought to each sensor path due to several reasons (e.g., cost of equipment, power, disturbance created by the installation of the equipment in the environment), wide are connectivity is brought to a base station instead

31. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • System Architecture • The base station may communicate with the sensor patch using a wireless LAN where each sensor patch is equipped with a gateway that can communicate with the sensor network and provides connectivity to the transit network • The transit network may consist of a single hop link or series of networked wireless nodes and each transit network design has different characteristics with respect to expected robustness, bandwidth, energy efficiency, cost and manageability • To provide data to remote end-users, the base station includes WAN connectivity and persistent data storage for the collection of sensor patches

32. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • System Architecture • It is expected that WAN connection will be wireless • The architecture needs to address the disconnection possibilities • Each layer (sensor nodes, gateways, base stations) has some persistent storage to protect against data loss due to power outage as well as data management services • At the sensor level, these will be primitive, taking the form of data logging • The base station may provide relational database service while the data management at the gateways falls somewhere in between • When it comes to data collection, long-latency is preferable to data loss • Users interact with the sensor network in two ways

33. Wireless Sensor Networks for Habitat Monitoring [Mainwaring+ 2002] • System Architecture • Remote users access the replica of the base station database • This approach assists on integration with data analysis and mining tools while masking the potential wide area disconnections with the base stations • On-site users may require direct interaction with the network and this can be accomplished with a small, PDA-sized device, referred to as gizmo • Gizmo allows the user to interactively control the network parameters by adjusting the sampling rates, power management parameters and other network parameters • The connectivity between any sensor node and gizmo may or may not rely on functioning on multi-hop sensor network routing

34. Energy-Efficient Computing for Wildlife Tracking: Design Tradeoffs and Early Experiences with ZebraNet [Juang+ 2002] • Introduction • Focus is on issues related to dynamic sensor networks with mobile nodes and wireless communication between them • In this system, the sensor nodes collars carried by the animals under study; wireless ad hoc networking techniques are used to swap and store data in a peer-to-peer manner and to pass it towards a mobile base station that sporadically traverses the area to upload data • Biology and biocomplexity research has been focused on gathering data and observations on a range of species to understand their interactions and influences on each other • For example, how human development into wilderness areas affects indigenous species there; understand the migration patterns of wild animals and how they may be affected by changes in weather patterns or plant life, by introduction of non-native species, and by other influences

35. Energy-Efficient Computing for Wildlife Tracking: Design Tradeoffs and Early Experiences with ZebraNet [Juang+ 2002] • Introduction • Finding and learning these details require long-term position logs and other biometric data such as heart rate, body temperature, and frequency feeding • Current wildlife tracking studies rely on simple technology, for example, many studies rely on collaring a sample subset of animals with simple VHF transmitters • Researchers periodically drive through and/or fly over an area with a receiver antenna, and listen for pings from previously collared animals • Once animal is found, its behavior can be observed and its observed position can be logged; however, there are limits to such studies • First, data collection is infrequent and can miss many “interesting events”

36. Energy-Efficient Computing for Wildlife Tracking: Design Tradeoffs and Early Experiences with ZebraNet [Juang+ 2002] • Introduction • Second, data collection is mostly limited to daylight hours, but animal behavior and movements in night hours can be different • Third, data collection is impossible or very limited for secluded species that avoid human contact • The most elegant trackers commercially available use GPS to track position and use satellite uploads to transfer data to a base station • These systems also suffer from several limitations • First, at most a log of 3000 position samples can be logged and no biometric data • Second, since satellite uploads are slow and uses high power consumption, they are done infrequently – this limits how often position samples can be gathered without overflowing 3000-entry log storage

37. Energy-Efficient Computing for Wildlife Tracking: Design Tradeoffs and Early Experiences with ZebraNet [Juang+ 2002] • Introduction • Third, downloads of data from the satellite to the researchers are both slow and expensive, therefore, constraining the amount of data collected • Finally, these systems operate on batteries without recharge – when power is drained, the system become unusable unless it is retrieved, recharged and re-deployed • ZebraNet project is building tracking nodes that include a low-power miniature GPS system with user-programmable CPU, non-volatile storage for data logs, and radio transceivers for communicating either with other nodes or with a base station

38. Energy-Efficient Computing for Wildlife Tracking: Design Tradeoffs and Early Experiences with ZebraNet [Juang+ 2002] • Introduction • One of the key principles of ZebraNet is that the system should work in arbitrary wilderness locations; no assumptions are made about the presence of of fixed antenna towers or cellular phone service • The system uses peer-to-peer data swaps to move the data around; periodic researcher drives bys and/or fly-overs can collect logged data from several animals despite encountering relatively few within range • Even though ad hoc sensor networks have been heavily studied, not much has been published about the characteristics of mobile sensor networks with mobile base stations and very few studies focus on building real systems

39. Energy-Efficient Computing for Wildlife Tracking: Design Tradeoffs and Early Experiences with ZebraNet [Juang+ 2002] • Introduction • This paper has the following unique contributions: • To the best knowledge of authors, this is the first study of mobile sensor networks protocols in which the base station is also mobile. It is presumed that researchers will upload data while driving or flying by the region • Zebra-tracking is a domain in which the node mobility models are unknown which makes it a research goal. Understanding how, when and why zebras undertake long-term migrations is the most essential biological question of this work. • ZebraNet’s data collection has communication patterns in which data can be cooperatively passed towards a base station • Energy tradeoffs are examined in detail using real system energy measurements for ZebraNet prototype hardware in operation

40. Energy-Efficient Computing for Wildlife Tracking: Design Tradeoffs and Early Experiences with ZebraNet [Juang+ 2002] • Introduction • Some of the interesting research questions to be explored are: • How to make the communications protocol both effective and power-efficient? • To what extent can we rely on ad hoc, peer-to-peer transfers in a sparsely-connected spatially-huge sensor network? • How can we provide comprehensive tracking of a collection of animals, even if some of the animals are reclusive and rarely are close enough to humans to have their data logs updated directly? • This research work gives quantitative explorations of the design decisions behind some of these questions

41. Energy-Efficient Computing for Wildlife Tracking: Design Tradeoffs and Early Experiences with ZebraNet [Juang+ 2002] • ZebraNet Design Goals • The ZebraNet project is a direct and ongoing collaboration between researchers in experimental computer systems and in wildlife biology • The wildlife biologists have determined the tracker’s overall design goals: • GPS position samples are taken every three minutes • Detailed activity logs taken for three minutes every hour • One year of operation without direct human intervention – that is, not counting on tranquilizing and re-collaring an animal more than once per year • No fixed base stations, antennas, or cellular service • A high success rate for eventually delivering all logged data is essential while latency is not as critical • For a zebra collar, a weight limit of 3-5 lbs is recommended

42. Energy-Efficient Computing for Wildlife Tracking: Design Tradeoffs and Early Experiences with ZebraNet [Juang+ 2002] • ZebraNet Design Goals • Ultimately, this detailed information may include several position estimates, temperature information, weather data, environmental data, and body movements that will serve as signatures of behavior; however, in this initial system, the focus is only on position data • Overall, the key goal is to deliver to researchers a very high fraction of the data collected over the months or years that the system is in operation • Therefore, ZebraNet must be power-efficient, designed with appropriate data log storage, and must be rugged to ensure reliability under tough environmental conditions

43. Energy-Efficient Computing for Wildlife Tracking: Design Tradeoffs and Early Experiences with ZebraNet [Juang+ 2002] • ZebraNet Problem Statement • The biologists design goals need to be translated into the engineering task at hand • Success rate at delivering position data to the researchers –data homing rate– should approach 100% • Weight limits on each node translate almost directly to computational energy limits since weight of the battery and solar panel takes bulk of the total weight of a ZebraNet node; therefore, collar and protocol design decisions must manage the number and size of data transmissions required • System design choices must be made that limit the range of transmissions since the required transmitter energy increases dramatically with the distance transmitted

44. Energy-Efficient Computing for Wildlife Tracking: Design Tradeoffs and Early Experiences with ZebraNet [Juang+ 2002] • ZebraNet Problem Statement • The amount of storage needed to hold position logs must be limited – if many redundant copies are stored and swapped, the storage requirements can scale as O(n2) • Although the energy cost of storage is small compared to that of transmissions, it is still necessary to develop storage-efficient design • Due to limited transceiver, coverage and a base station only sporadically available, ZebraNet must forward data through other nodes in peer-to-peer manner and store redundant copies of position logs in other tracking nodes • Some of the key challenges in ZebraNet come from the spatial and temporal scale of the system

45. Energy-Efficient Computing for Wildlife Tracking: Design Tradeoffs and Early Experiences with ZebraNet [Juang+ 2002] • ZebraNet Problem Statement • In terms of temporal scale, keeping a system running autonomously months at a time is challenging; it requires tremendous design-time attention to both hardware and software reliability • In terms of spatial scale, ZebraNet is also aggressive; it is the specific intent of the system to operate over an area of hundreds or thousands of square square kilometers • Due to the large distances involved and sparse sensor coverage, energy/connectivity tradeoffs become key

46. Energy-Efficient Computing for Wildlife Tracking: Design Tradeoffs and Early Experiences with ZebraNet [Juang+ 2002] • ZebraNet Problem Statement • These challenges mentioned here tackles several open problems: • ZebraNet protocol promises good communication behavior on mobile sensors forwarding data towards a mobile base station • ZebraNet explores design issues for sensors that are more coarse-grained than many prior sensor proposals. Larger the weight limits and storage budgets allow researchers to consider different protocols with improved leverage for sparsely-connected, physically-widespread sensors

47. References [Abrach+ 2003] H. Abrach, S. Bhatti, J. Carlson, H. Dai, J. Rose, A. Sheth, B. Shucker, J, Deng and R. Han, MANTIS: System Support for MultimodAl NeTworks of In-Situ Sensors, 2nd ACM International Workshop on Wireless Sensor Networks and Applications (WSNA 2003), September 2003. [Akyildiz+ 2002] I. F. Akyildiz, W. Su, Y. Sankarasubramaniam, and E. Cayirci, A Survey on Sensor Networks, IEEE Communications Magazine, Vol. 40, No. 8, pp. 102-114, August 2002. [Anderson 1995] J.G.T. Anderson, Pilot survey of mid-coast Maine seabird colonies: an evaluation of techniques, Bangor, ME, 1995. Report to the State of Maine Dept. of Inland Fisheries and Wildlife. [Hill+ 2000] J. Hill, R. Szewczyk, A. Woo, S. Hollar, D. Culler, and K. Pister, System Architecture Directions for Networked Sensors, Architectural Support for Programming Languages and Operating Systems (ASPLOS) 2000. [Juang+ 2002] P. Juang, H. Oki, Y. Wang, M. Martonosi, L-S Peh, and D. Rubenstein, Energy-Efficient Computing for Wildlife Tracking: Design Tradeoffs and Early Experiences with ZebraNet, ACM SIGARCH Computer Architecture News, vol. 30, no. 5, December 2002. [Mainwaring+ 2002] A. Mainwaring, J. Polastre, R. Szewczyk, D. Culler, and J. Anderson, Wireless Sensor Networks for Habitat Monitoring, 1st ACM International Workshop on Wireless Sensor Networks and Applications (WSNA 2002), Atlanta, Georgia, September 28, 2002. [TinyOS] TinyOS: a component-based OS for the networked sensor regime.