1 / 56

Chapter 5: Resolution and Detection of Nucleic Acids

Objectives. Explain the principle and performance of electrophoresis as it applies to nucleic acids.Compare and contrast agarose and polyacrylamide gel polymers. Explain the principle and performance of capillary electrophoresis as it is applies to nucleic acid separation.Describe the general types of equipment used for electrophoresis.Discuss methods and applications of pulsed field gel electrophoresis.Compare and contrast detection systems used in nucleic acid applications..

zyta
Download Presentation

Chapter 5: Resolution and Detection of Nucleic Acids

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


    1. Chapter 5: Resolution and Detection of Nucleic Acids Donna C. Sullivan, PhD Division of Infectious Diseases University of Mississippi Medical Center

    2. Objectives Explain the principle and performance of electrophoresis as it applies to nucleic acids. Compare and contrast agarose and polyacrylamide gel polymers. Explain the principle and performance of capillary electrophoresis as it is applies to nucleic acid separation. Describe the general types of equipment used for electrophoresis. Discuss methods and applications of pulsed field gel electrophoresis. Compare and contrast detection systems used in nucleic acid applications.

    3. Gel Electrophoresis Electrophoresis is the movement of molecules by an electric current. Nucleic acid moves from a negative to a positive pole. Nucleic acid has a net negative charge, they RUN TO RED

    4. Electrophoresis of Nucleic Acids Nucleic acids are separated based on size and charge. DNA molecules migrate in an electrical field at a rate that is inversely proportional to the log10 of molecular size (number of base pairs). Employs a sieve-like matrix (agarose or polyacrylamide) and an electrical field. DNA possesses a net negative charge and migrates towards the positively charged anode.

    5. Applications of Electrophoretic Techniques in the Molecular Diagnostics Laboratory Sizing of Nucleic Acid Molecules DNA fragments for Southern transfer analysis RNA molecules for Northern transfer analysis Analytical separation of PCR products Detection of Mutations or Sequence Variations

    6. Principles of Gel Electrophoresis Electrophoresis is a technique used to separate and sometimes purify macromolecules Proteins and nucleic acids that differ in size, charge or conformation Charged molecules placed in an electric field migrate toward either the positive (anode) or negative (cathode) pole according to their charge Proteins and nucleic acids are electrophoresed within a matrix or "gel"

    7. ELECTROPHORESIS

    8. Principles of Gel Electrophoresis The gel itself is composed of either agarose or polyacrylamide. Agarose is a polysaccharide extracted from seaweed. Polyacrylamide is a cross-linked polymer of acrylamide. Acrylamide is a potent neurotoxin and should be handled with care!

    9. Gel Electrophoresis Matrices

    10. Types Of Nucleic Acid Electrophoresis Agarose gel electrophoresis DNA or RNA separation TAE or TBE buffers for DNA, MOPS with formaldehyde for RNA Polyacrylamide gel electrophoresis (PAGE) Non-denaturing (Special applications in research) Denaturing contain 6-7 M Urea (Most common)

    11. Agarose Gel Electrophoresis Separates fragments based on mass, charge Agarose acts as a sieve Typically resolve 200 bp-20 kbp fragments <200 bp, polyacrylamide gels fragments> 20 kbp, pulse field gels Include DNA size standards

    12. Factors That Effect Mobility Of DNA Fragments In Agarose Gels Agarose Concentration Higher concentrations of agarose facilitate separation of small DNAs, while low agarose concentrations allow resolution of larger DNAs (Remember-inversely proportional!) Voltage As the voltage applied to a gel is increased, larger fragments migrate proportionally faster that small fragments Charge is evenly spread (uniform) so the larger fragments will have more charged groups

    13. Factors That Effect Mobility Of DNA Fragments In Agarose Gels Electrophoresis Buffer The most commonly used for double stranded (duplex) DNA are TAE (Tris-acetate-EDTA) and TBE (Tris-borate-EDTA). Effects of Ethidium Bromide Staining dye that inserts (intercalates) into the DNA between the nitrogenous bases (“rungs of the ladder”) and glows when exposed to UV light Binding of ethidium bromide to DNA alters its mass and rigidity, and therefore its mobility

    14. Comparison of Agarose Concentrations

    15. Fragment Resolution: Agarose Gel Electrophoresis

    16. Gel Electrophoresis: The Basics The movement of molecules is impeded in the gel so that molecules will collect or form a band according to their speed of migration. The concentration of gel/buffer will affect the resolution of fragments of different size ranges. Genomic DNAs usually run as a “smear” due to the large number of fragments with only small differences in mass

    17. Agarose Electrophoresis of Restriction Enzyme Digested Genomic DNA

    18. Gel Electrophoresis: Apparatus and Types of Gels Horizontal Gel Units (“Submarine Gels”) Most DNA and RNA gels Agarose Vertical Gel Units Polyacrylamide gels Typically sequencing gels Pulse Field Gel Units Any electrophoresis process that uses more than one alternating electric field Agarose Large genomic DNA (Chromosomal)

    19. Electrophoresis Equipment: Horizontal or Submarine Gel

    20. Agarose Gel Electrophoresis

    21. Agarose Gel Electrophoresis Horizontal Gel Format

    22. Agarose Gel Apparatus

    23. Electrophoresis Equipment: Vertical Gel

    24. Vertical Gel Format: Polyacrylamide Gel Electrophoresis

    25. Polyacrylamide Gel Electrophoresis (PAGE)

    26. Electrophoresis Equipment Combs are used to put wells in the cast gel for sample loading. Regular comb: wells separated by an “ear” of gel Houndstooth comb: wells immediately adjacent

    27. PULSE FIELD GEL ELECTROPHORESIS APPARATUS

    28. Types Of Pulse Field Gel Electrophoresis

    29. Pulse Field Gel Electrophoresis Used to resolve DNA molecules larger than 25 kbp Periodically change the direction of the electric field Several types of pulsed field gel protocols FIGE: Field inversion gel electrophoresis TAFE: Transverse alternating field electrophoresis RGE: Crossed field electrophoresis CHEF: Contour-clamped homogeneous electric field

    30. Critical Parameters: Pulse Field Gel Electrophoresis Depend on time it takes molecules of various sizes to change directions in a gel Small DNA molecules are sieved (pass through the pores in the agarose gel) Large DNA molecules are not “sieved” but “squeezed” through the gel at about the same rate, called the limiting mobility

    31. Size of Fragments and Distance Traveled Not Linear When Large Fragments Are Analyzed

    32. Movement Of DNA In Gels

    33. Pulse Field Gel Electrophoresis PFGE works by periodically altering the electric field orientation The large extended coil DNA fragments are forced to change orientation Size dependent separation is re-established because the time taken for the DNA to reorient is size dependent

    34. Comparison of Migration: Horizontal vs. CHEF

    35. Preparation Of Intact DNA For PFGE Conventional techniques for DNA purification (organic extraction, ethanol precipitation) produce shear forces DNA purified is rarely greater than a few hundred kb in size This is clearly unsuitable for PFGE which can resolve mb DNA The problem of shear forces was solved by performing DNA purification from whole cells entirely within a low melting temperature (LMT) agarose matrix

    36. Preparation Of Intact DNA For PFGE Intact cells are mixed with molten low melting point (LMT) agarose and set in a mold forming agarose ‘plugs’ Enzymes and detergents diffuse into the plugs and lyse cells Proteinase K diffuses into plugs and digests proteins If necessary restriction digests are performed in plugs (extensive washing or PMSF treatment is required to remove proteinase K activity) Plugs are loaded directly onto PFGE and run

    37. FIGE GEL

    38. CHEF: Contour-Clamped Homogenous Gel Electrophoresis Based on hexagonal array of alternate electric fields at 120 degree angle Generates a more uniform electric field when compared to other PFGE systems Programmable, autonomously controlled electrodes Extremely versatile system based on CHEF hexagonal array All electrophoretic parameters can be controlled at each electrode Can generate electric field and switching characteristics of any PFGE system

    39. PFGE of Bacterial DNA

    40. Using PFGE In The Molecular Investigation Of An Outbreak Of S. marcescens Infection In An ICU An outbreak due to S. marcescens infection was detected in the ICU A total of 25 isolates were included in this study: 12 isolates from infected patients nine isolates from insulin solution one isolate from sedative solution one isolate from frusemide solution two isolates from other wards which were epidemiologically-unrelated

    41. Using PFGE in the Molecular Investigation Of An Outbreak of S. marcescens Infection in an ICU

    42. Using PFGE in the molecular investigation of an outbreak of S. marcescens infection in an ICU The S. marcescens from patients, insulin solution and sedative solution showed an identical PFGE fingerprint pattern. The isolate from the frusemide solution had a closely-related PFGE pattern to the outbreak strain with one band difference. Found that the insulin and sedative solutions used by the patients were contaminated with S. marcescens and the source of the outbreak.

    43. Comparison Of Agarose Gel And PFGE

    44. Polyacrylamide Gel Electrophoresis (PAGE) PAGE is the preferred method for PROTEINS but can be used for DNA/RNA Gel prepared immediately before use by copolymerization of acrylamide and N,N'-methylene bis acrylamide under UV light. Porosity controlled by proportions of the two components. Larger pore size for larger proteins. Gradient gels also possible.

    45. Electrophoresis of Nucleic Acids Polyacrylamide Gel Electrophoresis (PAGE) Advantages High degree of resolving power. Can effectively and reproducibly separate molecules displaying 1 bp differences in molecular size. Optimal separation is achieved with nucleic acids that are 5–500 bp in size.

    46. Electrophoresis of Nucleic Acids Polyacrylamide Gel Electrophoresis (PAGE) Typical Conditions Vertical gel setup, TBE buffer (Tris-borate/EDTA) and constant power. Disadvantages Acrylamide monomer is a neurotoxin. Polyacrylamide gels can be difficult to handle.

    47. Electrophoresis of Nucleic Acids Agarose Gel Electrophoresis Advantages Greater range of separation of nucleic acid molecules. Optimal separation is achieved with nucleic acids that are 200 bp to 30 kb in size. Ease of preparation and handling.

    48. PAGE: Critical Parameters Polymerization reaction critical High grade acrylamide, bis-acrylamide Break down into acrylic acid (long shelf life solutions incorporate inhibitors of polymerization) Must have even heat distribution to prevent “smiling”

    49. Polymerization Of Polyacrylamide

    50. PAGE: DNA High resolution of low molecular weight nucleic acids (500bp) Polymerization of acrylamide monomers into long chains Cross link chains with bis-acrylamide Initiated by free radicals in ammonium persulfate, stabilized by TEMED Pore size determined by % acrylamide

    51. Electrophoresis of Nucleic Acids: Polyacrylamide Gel Electrophoresis (PAGE) Typical Conditions Vertical gel setup, TBE buffer (Tris-borate/EDTA) and constant power. Disadvantages Acrylamide monomer is a neurotoxin. Polyacrylamide gels can be difficult to handle.

    52. PAGE Fragment Resolution: Denaturing Conditions (6M Urea)

    53. PAGE Fragment Resolution: Non Denaturing PAGE

    54. Polyacrylamide Gel Electrophoresis of Restriction Digested PCR Products

    55. Denaturation of DNA: Urea and Formamide Both formamide and urea effectively lower the melting point of the DNA molecules, allowing the structures to fall apart at lower temperatures. Generally, concentrations of urea or formamide are chosen to give melting temperatures around 50° C, and gels are run at that temperature. RNA is often denatured with harsher agents, because RNA tends to form stronger structures. Both formamide and urea effectively lower the melting point of the DNA molecules, allowing the structures to fall apart at lower temperatures. Generally, concentrations of urea or formamide are chosen to give melting temperatures around 50° C, and gels are run at that temperature. RNA is often denatured with harsher agents, because RNA tends to form stronger structures.

    56. Preparation of Polyacrylamide Gel Pour into glass plate gel sandwich and polymerize. Prepare DNA samples by adding loading buffer. Document and verify loading order of samples and electrophoretic conditions (voltage). Stain gel, visualize DNA, photograph/ document and dispose of gel properly.

    57. PAGE of Restriction Digested PCR Products

More Related