1 / 20

How to Print

How to Print. Picture steps can teach you how to print. Ink and Spatula. Laminated Sheet. Roller. Paper. Draw the Design. On tracing paper. Get some ink. Put it on your sheet. Place it on your paper. Turn it over and press. Dry it. Wash it. And when it’s dry….

ismail
Download Presentation

How to Print

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to Print Picture steps can teach you how to print.

  2. Ink and Spatula

  3. Laminated Sheet

  4. Roller

  5. Paper

  6. Draw the Design

  7. On tracing paper

  8. Get some ink

  9. Put it on your sheet

  10. Place it on your paper

  11. Turn it over and press

  12. Dry it

  13. Wash it

  14. And when it’s dry…

  15. Pick another colour and do it again

  16. On the next slide are some more detailed steps…

  17. You will need: • Ink • Styrofoam sheet (printing plate) • Roller • Paper • Glass sheet or laminated sheet • Spatula

  18. The first layer: • Draw your monster or design on a sheet of paper. • Trace your design onto a sheet of tracing paper. • Draw over the design on the tracing paper, and make sure the styrofoam sheet is underneath so it presses through. • Take the foam sheet and trace over your design so there are deeper marks but not too deep. • Put some ink onto the laminated paper and use the roller to spread it out. • Keep rolling the ink around until it makes a tacky sound. • Make sure it is an even layer. • Put the ink onto the styrofoam sheet and even it out so there is a smooth layer. • Place your sheet of paper on top and press it with your hand. • Move in circle motions and only use the center of your hand. • Don’t use your knuckles. • Slowly remove the paper but do not remove it in a diagonal way. Remove it from the top so it doesn’t get scrunched up. • Put your paper on the drying rack or just let it dry. • Wash your styrofoam sheet and pick another ink colour and repeat.

  19. The second layer: • (After first layer is dry) • Draw some more detail of your design on your styrofoam sheet. • Make sure it is deep enough through the sheet but not too deep. • Roll more ink but in a different colour onto your styrofoam sheet. • Make sure it is an even layer. • Place the styrofoam sheet as accurately as possible. • Turn it over so the paper is on top. • Move your hand in circle motions with the center of your hand and not with your knuckles. • Slowly remove the paper from the sheet and you will see two different colours on your paper. • Dry your paper. • Wash your styrofoam sheet and repeat all these steps again (the ones for the second layer).

  20. Pictures took by: • Tatiana Smith • Steps Written by: • Tatiana Smith • People in the photos: • Laura • Regina • Sharifa • Sheikha

More Related