1 / 5

13:00 Introduction Experimental Activities 13:15 3.1 Injector geometry assessment

Spray G - Program. 13:00 Introduction Experimental Activities 13:15 3.1 Injector geometry assessment Yongjin Jung* (KAIST), Peter Hutchins ( Infineum /ESRF) 13:20 3.2 Rate-of-injection Raúl Payri * (CMT ), Scott Parrish (GM),

kato
Download Presentation

13:00 Introduction Experimental Activities 13:15 3.1 Injector geometry assessment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Spray G - Program • 13:00 Introduction • Experimental Activities • 13:15 3.1 Injector geometry assessment • Yongjin Jung* (KAIST), Peter Hutchins (Infineum/ESRF) • 13:20 3.2 Rate-of-injection • RaúlPayri* (CMT), Scott Parrish (GM), • 13:30 3.3 Spray Visualization (liquid/vapor penetration & angle) • JulienManin* (SNL), Gilles Bruneaux(IFPEN), Scott Parrish (GM), Luigi Allocca(IM), Josh Lacey (Melbourne) • 14:00 3.4 Drop size measurement (Phase Doppler Interferometry) • Scott Parrish* (GM) • Modeling Activities • 14:15 3.5 Internal flow modeling using ideal geometry • Ron Grover* (GM) • 14:30 3.6 Spray modeling • Noah Van Dam* (UW), Lucchini (Politecnico di Milano), Som (ANL) • 15:00 Discussion Period • 15:30 Break • *Discussion Leader

  2. Spray G – Discussion Period • What’s next for Spray G? • Continued work with the data already acquired • Boundary condition verifications • Qualification of data contributions • ESRF geometric data analysis • More measurements • X-ray PC imaging - moving needle, cavitation, etc • vapor fuel concentration • combustion? • More operating conditions • throttled early injection – flash boiling • unthrottled early injection – still relevant and easy for everybody • small quantity multiple injection?

  3. Spray G – Conditions to Consider Parameter Spray GSpray G2Spray G3 • Fuel Iso-octane Iso-octane Iso-octane • Fuel pressure 20 Mpa 20 Mpa 20 MPa • Fuel temperature 90ᵒ C 90ᵒ C 90ᵒ C • Injector temperature 90ᵒ C 90ᵒ C 90ᵒ C • Ambient temperature 300ᵒ C 20ᵒ C 20ᵒ C • Ambient density 3.5 kg/m30.6 kg/m3 1.12 kg/m3 (Pressure - Nitrogen) (600 kPa) (53 kPa) (100 kPa) • Injected quantity 10 mg 10 mg 10 mg • Number of injections 1 1 1

  4. 40 60 Ambient Pressure (kPa) 80 101 120 40 50 60 70 80 90 Injector Included Spray Angle (º) Spray G - Flash Boiling Conditions

  5. 40 60 Ambient Pressure (kPa) 80 101 120 40 50 60 70 80 90 Injector Included Spray Angle (º) Spray G - Flash Boiling Conditions

More Related