1 / 33

DCS Status Report

DCS Status Report. Valeri Falaleev , Piotr Golonka , Jonas Arroyo , Roman Fedoseev Siena 2012, NA62 Collaboration meeting Tuesday, 28 th August, 2012. Overview. Dry Run 2012. Detectors and subsystems status review. Tasks for Technical Run 2012. Siena, August 2012, Jonas Arroyo.

laksha
Download Presentation

DCS Status Report

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DCS Status Report ValeriFalaleev, PiotrGolonka, Jonas Arroyo, Roman Fedoseev Siena 2012, NA62 Collaboration meetingTuesday, 28th August, 2012

  2. Overview • Dry Run 2012. • Detectors and subsystems status review. • Tasks for Technical Run 2012. Siena, August 2012, Jonas Arroyo

  3. Dry Run 2012 - Objectives • Deployment / setup vertical slice of finalDCS infrastructure: • Front-End computers, data servers, console. • CAN and TCP/IP network infrastructure. • Software: WinCC OA (PVSS), OPC Servers, integration recent developments into the production application. • Complete control chain for Wiener crates. • Initial integration of LAV Front-End boards control. • DCS – Run Control link: discussion trigger • Initial exercise for integration of two systems. • Reuse of DCS software components in RC. • Sharing of the computing infrastructure. Siena, August 2012, Jonas Arroyo

  4. Dry Run 2012: Reminder-DCS Architecture Siena, August 2012, Jonas Arroyo

  5. Dry Run 2012: “Vertical Slice” running on final DCS infrastructure Siena, August 2012, Jonas Arroyo

  6. Dry Run 2012 - Full chain Wiener crates Siena, August 2012, Jonas Arroyo

  7. Dry Run 2012 – Initial LAV FE integration Siena, August 2012, Jonas Arroyo

  8. Dry Run 2012: RunControl/DCS link RUN CONTROL PVSS DISTRIBUTED SYSTEM DCS Siena, August 2012, Jonas Arroyo

  9. Dry Run 2012 - Challenges faced • Setup of Wiener crates: • CANbus problems: bus terminators, parallel activity of users, bitrates, distance... • Hardware failures: LAV_3 crate, CEDAR fan tray, power supply. • Investigating the cause of high failure rate: • Misplaced hardware: LKr_L0 crate installed in different place, Clock_02 crate not arrived. • Setup of LAV Front-End boards: • CANbus problems: bus terminators, parallel activity of users, bitrates, distance... (more on this later). Siena, August 2012, Jonas Arroyo

  10. Dry Run 2012 - Challenges faced • Delayed infrastructure delivery impacted the schedule • CAN buses. • TCP/IP networking. • Power, racks in the farm room. • Building works. • Control room refurbishment. • Hardware delivery. • CAEN HV • Integration during the Dry Run dropped due to delays in the delivery of h/w and s/w (OPC Servers). • Validation/integration efforts ongoing (more in next slides). Siena, August 2012, Jonas Arroyo

  11. Detectors and subsystems: Readiness for Technical Run 2012 - Common components: Wiener, CAEN - Detectors review

  12. Common components: Wiener • Based on standard fwWiener component of JCOP Fw • Significantly reduces the hardware-integration effort. • NA62 enhancements • New operation panels. • Integration into the FSM tree (hierarchical control). • Set up of default alarms. • Request during the Dry Run to enhance information in user interface. • Status of work: READY • Dry Run: successful control of all 6 available crates. • Ready for immediate integration of missing/damaged crates. Siena, August 2012, Jonas Arroyo

  13. Common components: CAEN HV • Control based on JCOP fwCaen component • “Classic” CAEN SY1527/2527 and A1833 board: • Will be used by LKr, CHOD for Technical Run 2012. • Status of work: READY(already demonstrated in 2011). • New CAEN SY4527 crate and A1536N board: • Will be used by LAV, MUV, CEDAR, SAC for Technical Run 2012. • Completely new control chain, late delivery (h/w and s/w): • New OPC Server (v5), firmware from CAEN (beta only in July). • Not validated, not integrated with JCOP Fw/PVSS . • Issues with backward compatibility with older crates, OS. • Significant effort in EN/ICE to validate/integrate as soon as possible: Benjamin Farnham, Roman Fedoseev, Manuel Gonzalez. • Status of work: ADVANCED . • To complete: final validation, panel enhancements. Siena, August 2012, Jonas Arroyo

  14. Common components: CAEN SY4527 integration fwCaen JCOP/Fw update OPC items modification Firmware upgraded Siena, August 2012, Jonas Arroyo

  15. LKr for 2012 Technical Run • User Requirement Document received.√ • Status: no changes since Spring • LKr Low Voltage: READY for commissioning. • LKr High Voltage (1, SY1527): READY,crate still to be integrated in FSM. • LKr L0 Wiener crate: software READY, crate not installed in the right place. Siena, August 2012, Jonas Arroyo

  16. LKr for 2012 Technical Run: UI Siena, August 2012, Jonas Arroyo

  17. LAV for 2012 Technical Run • User Requirement Document received. √ • LAV Front End boards, initial integration by Vito Palladino: • Managed to control in spite of CANbus problems (more in next slide). • Standalone application, pending integration with FSM in the final application. • Wiener crates: • READY LAV_01, LAV_02, LAV_03 h/w damaged. • CAEN HV (3 SY4527 for 3 station): PENDING (Vito?) • LAV Environment Monitor: • Application running again. • To be replaced by VAISALA sensor: PENDING (men power). Siena, August 2012, Jonas Arroyo

  18. LAV FE boards: CANbus communication • Problem exposed during Dry Run 2012 • Diagnostic effort with EN/ICE expert help and tools • voltage levels out of CAN specification: • exact reason/impact not yet understood; grounding? • Needs to be understood Kvaser LAV FE Kvaser LAV FE Siena, August 2012, Jonas Arroyo

  19. LAV Environment Monitor Siena, August 2012, Jonas Arroyo

  20. CEDAR readiness for 2012 Technical Run • User Requirement Document received. √ • Wiener crate: s/w READY, crate in repair. • High Voltage: • 1 SY4527 h/w, boards: awaiting delivery. • FwCaen component in progress for final integration of crates. • Initial versionof operation panels for discussion (next slide). • Motor control • Hardware detailed report from Ryan (??). • PLC and PVSS applications READY for commissioning. Siena, August 2012, Jonas Arroyo

  21. Proposal for CEDAR operation panel Channel 01 READY ON ON 1000 1000.5 200.3 ERROR flags Siena, August 2012, Jonas Arroyo

  22. MUV for 2012 Technical Run • User Requirement Document received: √ • High Voltage structure and labeling for MUV-1/2. • High Voltage structure and labeling for MUV-3. • 2 CAEN HV power supplies, SY4527 to integrate. • State of work: clarifying requirements. • segmentation of hierarchical control • operation panels • Hardware mapping • Wiener crate: READY. Siena, August 2012, Jonas Arroyo

  23. CHOD for 2012 Technical Run • User Required Document received. √ • Wiener crate: READY. • High Voltage: • 2 SY1527 crates will be integrated. • FSM ready, panels almost ready, working on synoptic panel. Siena, August 2012, Jonas Arroyo

  24. CHOD: operation panels Siena, August 2012, Jonas Arroyo

  25. SAC for 2012 Technical Run • User Required Document not received.X • High Voltage: • Only 4 channels needed. • SAC will make use of MUV’s SY4527 CAEN crate. Siena, August 2012, Jonas Arroyo

  26. Tasklist for 2012 Technical Run Siena, August 2012, Jonas Arroyo

  27. Detectors Summary Siena, August 2012, Jonas Arroyo

  28. Conclusions • Good progress during summer despite of the delays: • Objectives of 2012 Dry Run achieved. • Contributions from subdetectors very welcome (eg. Vito from LAV). • Initial exploratory work on the interplay with Run Control carried out. • NA62 DCS very well fitted in the CERN context: • Usage of CERN standard components and technologies. • Fruitful collaboration between EN/ICE and NA62 (h/w, OPC Servers, PVSS development, FSM expertise, CAN bus debugging...). • Collaboration with BE/CO made the DCS computing infrastructure setup much easier! • STILL a lot of work ahead before we are ready for Technical Run. Siena, August 2012, Jonas Arroyo

  29. Questions ??? • ? QUESTIONS ??? Siena, August 2012, Jonas Arroyo

  30. Questions ??? • ? QUESTIONS ??? Siena, August 2012, Jonas Arroyo

  31. SLIDE NA62 DCS ARCHITECTURE Siena, August 2012, Jonas Arroyo

  32. Dry Run – Wiener connection state • Wiener crate: • Effort to integrate Wiener crate in FSM • New panels, alarms and component done. • Request in Dry Run to modify information in panels. • CAEN crate and boards: • New CAEN crate in beta state  NEW CONTROL CHAIN. • Effort to validate Hardware and fwCaen component. • New OPC server based in Windows 7 is back compatible with “old crates” (SY1527). • Thanks also to Roman Fedoseev and Benjamin Farnham. Siena, August 2012, Jonas Arroyo

  33. LAV - Architecture Siena, August 2012, Jonas Arroyo

More Related