1 / 5

Real time implementation of unity power factor correction converter based on fuzzy logic

In this paper an analysis and real time implementation of unity power factor correction converter (PFC) based on fuzzy logic controller is studied. A single phase AC–DC boost converter is realized to replace the conventional diode bridge rectifier. Fuzzy logic and hysteresis control techniques is implemented to improve the performance of the boost converter. The fuzzy controller is applied to DC voltage loop circuit to get better performance. The current loop is being controlled by using a PI, and hysteresis controllers. The robustness of the controller is verified via MATLAB/Simulink, the results show that the fuzzy controller gives well controller. An experiment test is implemented via a test bench based on dSPACE 1103. The experimental results show that the proposed controller enhanced the performance of the converter under different parameters variations.

Ashok123
Download Presentation

Real time implementation of unity power factor correction converter based on fuzzy logic

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ELECTRICAL PROJECTS USING MATLAB/SIMULINK ELECTRICAL PROJECTS USING MATLAB/SIMULINK Gmail:asokatechnologies@gmail.com, Website: http://www.asokatechnologies.in 0-9347143789/9949240245 Real time implementation of unity power factor Real time implementation of unity power factor correction correction converter based on fuzzy logic converter based on fuzzy logic Abstract In this paper an analysis and real time implementation of unity power factor correction converter (PFC) based on fuzzy logic controller is studied. A single phase AC–DC boost converter is realized to replace the conventional diode bridge rectifier. Fuzzy logic and hysteresis control techniques is implemented to improve the performance of the boost converter. The fuzzy controller is applied to DC voltage loop circuit to get better performance. The current loop is being controlled by using a PI, and hysteresis controllers. The robustness of the controller is verified via MATLAB/Simulink, the results show that the fuzzy controller gives well controller. An experiment test is implemented via a test bench based on dSPACE 1103. The experimental results show that the proposed controller enhanced the performance of the converter under different parameters variations. Keywords 1.Power factor correction (PFC) 2. PLL 3. Fuzzy logic controller (FLC) 4. Hysteresis controller 5. DSPACE 1103 Software: MATLAB/SIMULINK For Simulation Results of the project Contact Us Gmail:asokatechnologies@gmail.com, Website: http://www.asokatechnologies.in 0-9347143789/9949240245

  2. ELECTRICAL PROJECTS USING MATLAB/SIMULINK ELECTRICAL PROJECTS USING MATLAB/SIMULINK Gmail:asokatechnologies@gmail.com, Website: http://www.asokatechnologies.in 0-9347143789/9949240245 Circuit Diagram: Fig. 1. Single phase PFC boost converter control system Expected Simulation Results Fig.2. Diode Bridge input current For Simulation Results of the project Contact Us Gmail:asokatechnologies@gmail.com, Website: http://www.asokatechnologies.in 0-9347143789/9949240245

  3. ELECTRICAL PROJECTS USING MATLAB/SIMULINK ELECTRICAL PROJECTS USING MATLAB/SIMULINK Gmail:asokatechnologies@gmail.com, Website: http://www.asokatechnologies.in 0-9347143789/9949240245 Fig.3. Line Current and its harmonic spectrum using the fuzzy controller for DC bus Fig.4. DC bus voltage based on fuzzy controller For Simulation Results of the project Contact Us Gmail:asokatechnologies@gmail.com, Website: http://www.asokatechnologies.in 0-9347143789/9949240245

  4. ELECTRICAL PROJECTS USING MATLAB/SIMULINK ELECTRICAL PROJECTS USING MATLAB/SIMULINK Gmail:asokatechnologies@gmail.com, Website: http://www.asokatechnologies.in 0-9347143789/9949240245 Fig.5. PFC input current Conclusion: In this paper, a single-phase PFC converter DC voltage loop has been analysed. The fuzzy logic controller technique is implemented to improve the performance of the PFC converter, it is robust and efficient. Matlab/Simulink has been used to simulate the proposed techniques with successful result, the dSPACE 1103 have been used to implement the fuzzy controller in real- time. Simulation results have been presented and confirmed by the real time tests; in the same time, high efficiency is obtained. The proposed controller applied to the unity power factor give better results, a reduced harmonic distortion, and robustness control during parameter variations. For Simulation Results of the project Contact Us Gmail:asokatechnologies@gmail.com, Website: http://www.asokatechnologies.in 0-9347143789/9949240245

  5. ELECTRICAL PROJECTS USING MATLAB/SIMULINK ELECTRICAL PROJECTS USING MATLAB/SIMULINK Gmail:asokatechnologies@gmail.com, Website: http://www.asokatechnologies.in 0-9347143789/9949240245 References [1] M. Malinowski, M. Jasinski, M.P. Kazmierkowski, “Simple direct power control of three- phase PWM rectifier using space-vector modulation (DPCSVM)”, IEEE Transactions on Industrial Electronics (2004) 447–454 [2] Masashi O., Hirofumi M. “An AC/DC Converter with High Power Factor”, IEEE Transaction on Industrial Electronics, 2003, Vol 50, No. 2, pp. 356–361. [3] Kessal A, Rahmani L, Gaubert JP, Mostefai M. “Analysis and design of an isolated single- phase power factor corrector with a fast regulation”. Electr Power Syst Res 2011; 81:1825–31. [4] Guo L, Hung JY, Nelms RM. “Comparative evaluation of sliding mode fuzzy controller and PID controller for a boost converter.” Electr Power Syst Res 2011; 81:99–106. [5] Kessal A, Rahmani L, Gaubert JP, Mostefai M. “Experimental design of a fuzzy controller for improving power factor of boost rectifier”. Int J Electron 2012;99 (12):1611–21. For Simulation Results of the project Contact Us Gmail:asokatechnologies@gmail.com, Website: http://www.asokatechnologies.in 0-9347143789/9949240245

More Related