20 likes | 46 Views
This is our second generation of Sanitary hex pipe hanger. These pipe hangers are designed specifically for use in Bio-Technology, Pharmaceutical, Food, Beverage, and Dairy areas. Having no exposed threads, no crevices and a geometry that facilitates drain ability and cleanability make these hangers ideal for use in hygienic areas.<br>
E N D
SYNTIRO DYNAMICS NEW PROCESS HEX HANGER - FIGURE PHH STAINLESS STEEL TUBE, SCHEDULE PIPE AND PVC COATED CONDUIT 1/2” Tube (0.50”) to 4” Pipe (4.5”) PRODUCT FIGURE PHHW Weld Mount SILICONE GROMMETS FEATURES: FIGURE PHHTC Threaded Coupling Connection • • • Circumference seals to pipe Seals to hardware frame Hardware Frame snaps into Silicone Grommet reducing loose pieces Zero entrapping crevices Drainable cleanable design Resistant to high temperatures Excellent electric insulator Color coded for line type designation • • • • • Process Hex Hanger FIGURE PHHR Rod Connection Cleanliness, Safety & Laborsaving “Uptime” Features Antiquated Hex CARRIAGE BOLT & ACORN NUT FEATURES: • • • Drainable & Cleanable No exposed threads Carriage bolt locks into the Hard- ware Frame’s square hole allowing installer to use a single wrench The antiquated Entrapping Hex requires two wrenches, increasing safety concerns and installation time Carriage bolts are reversible, so rounded drainable surface is always on the hangers topside Drainable Exterior Design YES NO Limits puddling & contaminant collection Wipe Down Cleanable Maintenance uptime YES NO • Exposed Threads Contaminant entrapment zone Crevices NO YES • NO YES Contaminant entrapment zone Two wrenches required for installment NO YES Safety and effi ciency concerns Sharp Edges NO YES Safety concerns & contaminant collector MATERIALS • Silicone Insert/Grommet - 80 durometer • Intermittent temperatures from -40F (-40C) to 320F (160C) • Tube & Pipe - Anchors are Light Gray & Guides are Red • PVC Coated Electrical Conduit - Light Gray • Contact sales@syntirocorp.com for chemical resistance data Hardware - 304 & 316 Stainless Steel Carriage Bolt “CB” 2 CB’s per unit Hardware Frame “HF” Silicone Grommet “SG” • Silicone Grommet “SG” Hardware Frame “HF” (HF snaps into SG reducing loose pieces) APPLICATIONS: • Cleanrooms and mechanical areas; not limited to: biotech pharmaceutical, food processing, beverages, dairy, cosmetic chemical, water treatment, and semi-conductor industries. Acorn Nut “AN” 2 AN’s per unit Syntiro Dynamics - 5033 Industrial Rd., Building 6, Farmingdale, NJ 07727-3947 T: 732-377-3307, F: 732-230-6695 sales@syntirocorp.com, www.syntirocorp.com U.S. Pat. No. US 9,038,968 B2 3
SYNTIRO DYNAMICS PROCESS HEX HANGER ASSEMBLY FIGURE PHH Hanger Assembly Part Number Builder Process Hex Hanger Mount Line Size & Type * Hardware Material Insert Material Anchor / Guide W Weld 1.5PVP 1 1/2” PVC Coated Pipe - Conduit 304 304 SS S Silicone A Anchor PHH TC Threaded Coupling 2.0T 2” Stainless Steel Tube 316 316 SS S Silicone G Guide 0.75P R Rod Mount 3/4” Schedule Pipe Ordering Examples: PHHW1.5PVP316SA = PHH, Weld Mount, 1 1/2” PVC Coated Pipe Conduit 316, Silicone Light Gray, Anchor PHHTC2.0T304SG = PHH, Threaded Coupling Mount, 2” Stainless Steel Tube, 304, Silicone Red, Guide PHHR0.75P304SA = PHH, Rod Mount, 3/4” Schedule Pipe, 304, Silicone Light Gray, Anchor * Refer to “PN Code” on the below price chart Hardware Size 1 2 3 4 Line Size 1/2” Tube PN Code 050T Line Size 1/2” Pipe 1/2” PVP 1” Tube PN Code 0.50P 0.50PVP 1.0T Line Size 3/4” Pipe PN Code 0.75P Line Size 1” Pipe 1” PVP 1.5” Tube PN Code 1.0P 1.0PVP 1.5T Line Size 1.25” PVP 1 1/2” Pipe 2.0” Tube PN Code 1.25PVP 1.5P 2.0T Line OD 3/4” Tube 075T 3/4” PVP 0.75PVP Length Width Height 2.375 (60) 0.75 (19) 1.06 (27) 0.47 (12) 3/8”-16 (M10) 11 Gauge - 0.125” 0.28 (125) 2.69 (68) 1.0 (25.4) 1.56 (40) 0.47 (12) 3/8”-16 (M10) 11 Gauge - 0.125” 0.30 (136) 3.63 (92.2) 1.0 (25.4) 2.13 (54) 0.47 (12) 3/8”-16 (M10) 11 Gauge - 0.125” 0.46 (210) 4.31 (110) 1.0 (25.4) 2.63 (66.7) 0.47 (12) 1/2”-13 (M12) 11 Gauge - 0.125” 0.58 (261) Hang Nut Height Thread ** Hardware Gauge Lbs. (g) Hardware Size 7 Line Size 3” Pipe 5 6 8 9 Line Size 1 1/2” PVP 2” Pipe 2 1/2” Tube PN Code 1.5PVP 2.0P 2.5T Line Size 2” PVP 2 1/2” Pipe 3” Tube PN Code 2.0PVP 2.5P 3.0T PN Code 3.0P Line Size PN Code Line Size PN Code Line OD 4” Tube 4.0T 4” Pipe 4.0P 3” PVP 3.0PVP Length Width Height 4.78 (124) 1.0 (25.4) 3.13 (79) 0.59 (15) 1/2”-13 (M12) 8 Gauge - 0.1719” 0.61 (275) 5.38 (137) 1.0 (25.4) 3.63 (92) 0.59 (15) 1/2”-13 (M12) 8 Gauge - 0.1719” 0.66 (301) 6.0 (152) 1.00 (25.4) 4.25 (108) 0.59 (15) 1/2”-13 (M12) 8 Gauge - 0.1719” 0.69 (312) 6.63 (168) 1.0 (25.4) 4.63 (117) 0.75 (19) 5/8 “-11 (M16) 7 Gauge - 0.1875” 0.74 (337) 7.50 (191) 1.0 (25.4) 5.625 (143) 0.88 (22) 5/8”-11 (M16) 7 Gauge - 0.1875” 0.76 (346) Hang Nut Height Thread ** Hardware Gauge Lbs. (g) ** Hanger’s threads match MSS Pipe 69’s table 4’s recommended minimum rod diameter Syntiro Dynamics - 5033 Industrial Rd., Building 6, Farmingdale, NJ 07727-3946 T: 732-377-3307, F: 732-230-6695 sales@syntirocorp.com, www.syntirocorp.com U.S. Pat. No. US 9,038,968 B2 4