6 Facts About a Beam Trolley

1. 6 Facts About a Beam Trolley When it comes to lifting heavy objects, most companies rely on a push beam trolley. After all, it is efficient and safe. However, even industries that use this equipment often don’t know all the facts. Helpful Information Below you will find important information that could help make the trolley even more beneficial. Number One — Diversity The diversity of a beam transport trolley is just one of its many benefits. However, it’s more diverse than you might know. For instance, you can use this equipment on existing structural beams. It is also ideal for gantry beams made of aluminum and steel. So, you can bridge the gap between point A and point B to create a monorail system that runs perpendicularly. Even better, you can do this without altering the beam’s structure whatsoever. Number Two — Angle Flexibility Here’s another fact about a push beam trolley. Unlike other equipment, it is usable at a 45-degree angle. So, it’s more flexible for certain applications. Of course, it all depends on the beam’s flange size. As long as the thickness falls between three and seven inches, you can use clamps to accomplish this. Business Address: 1430 N Post Oak Road, Houston, Texas 77055 Phone No. –866-848-2032Site - https://www.murphyindustrialproducts.com Email ID–sameday@murphyindustrialproducts.com

2. Number Three — Clamp Load Each clamp on a beam transport trolley can handle a load of up to three tons. For one thing, that eliminates the need for a multi-ton system. For another, it ensures that you keep CG under acceptable working load limits. Number Four — Eliminate Weight Distribution Concerns You can attach the load-bearing beam so that it is under the affixed beam. So, you never need to worry about the proper weight distribution of the load handled by a hand pushed trolley. Not only does this prevent overload issues but also CG problems. Number Five — Tightening Bolts Typically, torque wrenches only have attached three-inch levers. That means to achieve proper torque, it would require 36 pounds of force. In comparison, a quality hand pushed trolley needs just 108 pounds per foot of torque to tighten the bolts. Therefore, you have more confidence that the bolts are secure. Number Six — Connects Different Flange Materials and Widths This is one of the more common facts about a hand pushed trolley that people don’t know. For beams with varying flange materials and widths, it’s possible to connect them. For instance, you could connect a seven-inch flange beam with a three-inch flange. Although you need to make sure they are adaptable, most often, this isn’t an issue. We’ll Help You Choose the Right Push Beam Trolley When you are ready to buy new equipment, allow the experts at Murphy Industrial Products Inc. to assist. We offer a broad range of industrial products from various leading manufacturers. Once you contact us, our experts will help you find the right beam transport trolley based on your specific needs. We look forward to serving you as a valued customer. Source - https://goodstoryhub.com/6-facts-about-a-beam-trolley/ Business Address: 1430 N Post Oak Road, Houston, Texas 77055 Phone No. –866-848-2032Site - https://www.murphyindustrialproducts.com Email ID–sameday@murphyindustrialproducts.com