190 likes | 761 Views
Player Guitar Preliminary Design Review. Lucas Gilbride Rick Denney Dan Forrester Randy Hood. Introduction.
E N D
Player GuitarPreliminary Design Review Lucas Gilbride Rick Denney Dan Forrester Randy Hood
Introduction Our project is a device that plays downloaded music in MIDI format on an acoustic guitar. The design will use stepper motors attached to guitar picks to pluck the strings and will use solenoids to depress the strings so that different notes can be strummed.
Objectives • Successfully Encode/Decode MIDI Files • Play test song from memory • Play MIDI file saved to memory • Optimize timing of mechanics (Motors and Solenoids) • Design working model of top four frets
Guitar Design Using the top four frets these are the notes that can be produced (not including flats and sharps), which when played together can create most common chords. We are going to use solenoids to apply pressure to these spots on the neck of the guitar.
Hardware Overview FPGA Microprocessor User Interface ROM Motor and Solenoid Controllers RAM MIDI Decoder (Optional) Pick Motors Flash Card Solenoids
Software Overview Operating System MIDI Decoder User Interface Flash Driver MIDIs to RAM
User Interface Our design will incorporate a user interface so that songs can be played by the user much like a typical CD player. We will have play, stop, pause, and skip track buttons. There will be a LCD display that lets the user know what track is selected.
Compact Flash Card • Small removable mass storage device • Connected to microprocessor with a 8 bit data bus • Microprocessor interfaces w/ CF card with registers on CF card
Solenoids Solenoids will be used to hold down strings in order to play notes. A solenoid will be picked based on its size and power characteristics. The end of each solenoid will be padded in order to prevent damage to the guitar.
Stepper Motors Stepper motors will be used to strum the six strings on the guitar. The stepper motor used will be pick based on its size, price, and power specifications.
Possible Extensions • Add more frets to design • Elaborate on user interface • Expand on string plucking timing
Division of Labor Randy Microprocessor User Interface Lucas FPGA Mechanics Rick MIDI (Reading and Storage) Dan Mechanics Overall Assembly
Milestones • CDR • Research/Test Components • Working mechanics • Understanding of Microprocessor architecture • Milestone 1 • Implemented FPGA logic • Completed MIDI translator code • Working motor and solenoid drivers
Milestones Cont. • Milestone 2 • Combine Code and Subsystems • Begin testing, debugging, and optimizing • Expo • Full functional design • Cosmetics added • Possible design extensions
Risks/Contingency Plan • Difficulty programming MIDI decoder Solution: Use MIDI decoder chip • Problems using flash card to transfer MIDIs Solution: Use serial cable • Strength of solenoids Solution: Explore other more expensive atternatives • User interface display Solution: Use computer generated interface display
Marketability The Player Guitar is the perfect product for the music lover who is unable to play the guitar, but loves the relaxing sound of an acoustic guitar. A great compliment to a player piano. Trying to start a band and missing a guitar player? No problem…. buy a Player Guitar.