1 of each of these, to make this chair back glued together

1. Gothic arch break-down chairs. Original idea by Sir Kragon of Land’s End. Plans by Master Rhys Terafan Greydragon 40” 48” 10” 18” 20.5” 1 of each of these, to make this chair back glued together 24”

2. 24” Cut/assemble two of these arm rests 20.5” Three times the thickness of the sides 16” The thickness of the sides 16.5” Cut one chair seat 21.5” Detail of the peg slots 16.5” The left space (shaded area) is the thickness of the sides of the chairs. (I used ¾” plywood.) 5” 26” .5” .5” .75” .5” 29” 18” 1.0” 8” .5” Cut two of these chair legs

3. 10” 8” 21.5” Position the seat slots so the rear of the seat is 1” lower than the front. Make the line of the slots for the back perpendicular to the seat, (dashed line) 16.5” 5” 29” 26” ½” 18” 17” 8”

4. Full size quatrefoil pattern (2.5” circles just touching in the center, 5” total) on a 6” circle

5. One method I lay out the chair pieces on a 4’ x 8’ sheet of plywood, but it is better to make 2 chairs using ½” plywood for the backs and ¾” plywood for the seat and sides