1 / 19

SERVICE MANUAL FOR: I-Bike S

SERVICE MANUAL FOR: I-Bike S. Specifications. Set up dimension: 110X55X129mm Fold up dimension: No Weight of product: 29kg Shipping Weight: User weight limit: 120kg Resistance Level: Manual 8 levels Incline Range: No Hand Pulse Sensor: Yes Wireless Pulse Sensor: No

abba
Download Presentation

SERVICE MANUAL FOR: I-Bike S

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SERVICE MANUAL FOR: I-Bike S

  2. Specifications Set up dimension: 110X55X129mm Fold up dimension: No Weight of product: 29kg Shipping Weight: User weight limit: 120kg Resistance Level: Manual 8 levels Incline Range: No Hand Pulse Sensor: Yes Wireless Pulse Sensor: No Power Requirement: UM-3 AA 1.5v X 2 Motor: No Emergency Stop: No

  3. Parts Explosive Drawing

  4. Parts List

  5. Remove chain covers Step 1: First use a flat screwdriver remove crank plastic cover then use 14mm socket wrench to undo crank nut. Step 2: Use a open crank tool/crank puller to remove crank. Crank puller tool Step 3: Follow the same procedure To remove crank arm from the other side Step 4: Use a crank puller tool to undo crank. Step 6: Remove Front stabilizer tube cover. Step 5: Move up Chain cover upper cover.

  6. Step 7: Use a Phillips screwdriver to undo Main chain Cover right screws x 4. Step 6: Remove Rear stabilizer tube cover. Step 8: Remove Main chain cover-right. Step 9: Use a Phillips screwdriver to undo Main chain Cover left screws x 2. Step 9: Remove Main chain cover left.

  7. Remove flywheel Step 1: Follow Remove chain cover instructions to remove both chain covers. Step 2: Remove belt tension spring. Step 3: Remove the driver belt. Step 4: Use 3mm Allen wrench to remove 3 x Bolts from the flywheel. Step 5: Follow the same procedure to remove 3 x bolts From other side of the flywheel. Step 6: Once undone Flywheel can be removed

  8. Disassemble flywheel set Step 1: Follow Remove chain cover instructions to remove both chain covers. Step 2: Follow Disassemble flywheel set instructions to remove flywheel set. Step 3: Use 8mm Allen wrench to undo Flywheel bolt x 1. Step 4: Remove flywheel Aluminum support. Step 5: Use 4mm Allen wrench to undo Aluminum disk bolts x 4. Step 6: Aluminum disk and axle can be dismantled from flywheel.

  9. Disassemble resistance bracket Step 1: Follow Remove chain cover instructions to remove both chain covers. Step 2: Use 6mm Allen wrench,14mm and 17mm wrench to undo 2 x bracket securing nuts. Step 3: Remove magnet bracket axle and spring. Step 4: Remove magnet bracket axle. Step 5: Remove bracket. Step 6: When reassembling the magnet bracket. You must ensure That the spring , thin washer and thick washer are installed as above.

  10. Dismantle manual resistance adjust knob Step 1: Use a Phillips screwdriver to undo resistance unit on front post. Step 2: Remove resistance unit. Step 3: Use a Phillps screwdriver to remove Resistance unit screws x 3. Step 4: Remove resistance VR set.

  11. Pulse sensor Pulse sensor Flywheel

  12. Console over view

  13. Engineer mode setting Set console measurement for I Bike S or I Trainer S: The I Bike S and I Trainer S consoles are the same. The only difference is the computer measures speed and distance differently, see below instructions. Power off then connect 01 jump then power on, display will show “78” This is the setting this for I Bike S console . Power off then disconnect 01 jump then power on, display will show “56” This is the setting for I Trainer S console .

  14. Switch display between Metric(km/h) or English(ml/h): The console PC board has a switch that can change console between Metric or English, see below instructions to change. Remove the battery from console. Remove the 5 x screws in the rear of the console to access the PC Board. On the PC Board there is a switch that is used to change between KM/H and ML/H. Push the switch down to select KM/H Push the switch up to select“MPH” Once the speed/distance reading is selected, insert the battery, power the machine back on and the selected reading will be displayed in the upper section of the screen.

  15. Trouble Shooting COMPUTER DISPLAY NOT CLEAR. Computer display not clear DOES REPLACING THE BATTERIES CURE THE PROBLEM. YES FIXED NO REPLACE COMPUTER

  16. No Computer display or display not clear REMOVE THE BATTERY THEN REPLACE IT, IS COMPUTER DISPLAY CORRENT? NO CHECK AND CLEAN METAL CONNECTOR IN BATTERY HOLDER DOES COMPUTER NOW DISPLAY? YES YES IS RPM SENSOR WIRE CONNECTED INTO COMPUTER NO FIXED NO RECONNECT REPLACE COMPUTER YES IS MAGNET STILL INTACT ON FLYWHEEL? NO RE-INSTALL A MAGNET STONE IS DISTANCE WITHIN 3-5MM FROM MAGNET TO RPM SENSOR? NO REPLACE RPM SENSOR RE-ADJUST

  17. Computer not displaying RPM IS RPM SENSOR WIRE CONNECTED INTO COMPUTER? NO RECONNECT YES IS MAGNET STILL INTACT ON FLYWHEEL? NO RE-INSTALL MAGNET IS DISTANCE WITHIN 3-5MM FROM MAGNET TO RPM SENSOR? NO RE-ADJUST REPLACE RPM SENSOR

  18. Computer no display resistance level IS RESISTANCE KNOB VR WIRE 3PIN CONNECTOR DISCONNECTED ON COMPUTER PC BOARD? YES RECONNECT NO IS VR RESISTANCE VALUE CORRECT AT RESISTANCE LEVEL 1 POSITION? NO RE-ADJUST REPLACE VR IN RESISTANCE ADJUST KNOB

More Related