1 / 36

Advanced metallic materials

Advanced metallic materials. Prof. Priit Kulu. Outline. High-strength structural steels High-performance tool steels Metallic-ceramic materials Light-weight metals and alloys Superalloys. 2. Metallic materials with superior properties. Structural alloys.

abdul-sawyer
Download Presentation

Advanced metallic materials

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Advanced metallic materials Prof. Priit Kulu

  2. Outline • High-strength structural steels • High-performance tool steels • Metallic-ceramicmaterials • Light-weight metals and alloys • Superalloys Advanced metallic materials 2

  3. Metallic materials with superior properties Structuralalloys Mg- and Al-alloys with superior properties, Al-metaglass, foams Superconductive NbTi, Nb3Sn, Nb3Ge Ti-alloys with thermomechanical properties, superalloys, maragingsteels, intermetallides, high-density alloys, shape-memory alloys Neodymium rare-earth magnets (alloysofNd, Fe and B) are strongestknownpermanentmagnets. Sm-Comagnets Amorphousalloyswithchemical and thermalproperties, Ni- and Fe aluminates Biocompatible Ti-alloys Advanced metallic materials Advanced metallic materials 3

  4. Strength groups of materials Classification based on tensilestrength (Rm) of materials • Low-strength (<250 N/mm2) • Mid-strength (250...750 N/mm2) • High-strength (750...1500 N/mm2) • Ultrahigh-strength (<1500 N/mm2) Advanced metallic materials 4

  5. Production technologies of hihg-strength steels and alloys Advanced metallic materials 5

  6. High-strength structural steels • High-performance tool steels • Metallic-ceramicmaterials • Light-weight metals and alloys • Superalloys Advanced metallic materials 6

  7. High-strength steel ...what is it? The end of 1920-s Steel St 52 (S355) for bridge construction  Today S355 is standard grade  Definition for “high-strength” isdependent on level of development. Steel ReH > 355 MPa Advanced metallic materials 7

  8. Alloying of ferrite Hardening Ageing Ageing time, t Alloying elements, % Methods for increasing strength • structure refinement • alloying – B; microalloying elements – Nb, Ti, V and N • low carbon steels  transgranular fracture • two- and multi-phase structures – F+M; F+M+B • dispersion strengthening – micro- and nanosteels • deformation hardening: - low- & high-temperature - isothermal - marforming Advanced metallic materials

  9. Heat treatable boron-steels ≈ 0,003% of B  increased through-hardenability  0,002...0,003% of B in solid solution has the same effect on hardenability than 0,7% Cr; 0,5% Mo or 1% Ni Through-hardenability  diameter up to 200 mm C24CR Rp0,21000; Rm1500; A 7% Advanced metallic materials 9

  10. Low-alloy high-strength steels Also known as HSLA steels • C = 0,2..0,3% ; alloying el: Mn, Si • Micro alloying with Nb, Ti and/or V – dispersion strengthening + grain refinementHX340LADHX460LAD • Rp0,2560; Rm640 N/mm2; A – min 15% Advanced metallic materials 10

  11. Two- and multi-phased steels Also known as duplex (DP) and complex (CP) steels Ultra-High-strength (UHS) ductile steels • Two-phase LITEC DP Rp0,2750 N/mm2; Rm980 N/mm2; A – min 10% Advanced metallic materials 11

  12. - Multi-phase LITEC CP Rp0,2900; Rm980 N/mm2; A – 7% DP-steel CP-steel →good formability and high strength →ability of high energy absorption →high strain-hardening rate →good fatigue strength Advanced metallic materials 12

  13. Maraging (martensite-ageing) steels (1) Martensitic steels ( C%) • low ductility and toughness in case of high Rm • M decomposition, formation of carbide phase  brittleness Maraging steels in 1980 • low C-content (0,03%)  transgranular fraction • alloying el. – Ni (17...25%), Mo + Ti, Al, Ta etc. Quenching  C-free martensite, Ageing  intermetallides (4 – 5) nm, (NiTi, Ni3Ti, NiAl, Ni3Mo etc.) Rm  2000 N/mm2, Rp0,2  1500 N/mm2, A = 10 - 12% Advanced metallic materials 13

  14. Maraging steels (2) Advanced metallic materials 14

  15. Termomechanically processed / deformation hardened high temperature low temperature isothermal marforming Advanced metallic materials 15

  16. Thermomechnical rolling

  17. TRIP-steels (Transformation Induced Plasticity) • Low alloy steels (car industry) 0,2 – 0,3 % C; 1,5 – 2,0 % Mn, Si + Al • High alloy Ni-Cr steeks 0,2 – 0,3 % C; 8 – 32 % Ni; 8 – 14 % Cr+Mn (0,5 – 2,5%), Mo, Si Quenching (985 – 1200 °C) → F, B, A Deformation (< Trecr = 250 – 550 °C), A → M Rm →1700, Rp0,2 → 1550, A =50 – 60 %, ↑KIC, σ-1

  18. Rp0,2 N/mm2 KTMT TMT + def. ageing 2000 Maraging steels (high-alloy) 1000 Low-alloy steels 20 40 60 60 A% Strength-plasticity of high-strength steels TRIP-steels TMT + def. ageing

  19. High-strength structural steels • High-performance tool steels • Metallic-ceramicmaterials • Light-weight metals and alloys • Superalloys Advanced metallic materials 19

  20. Advanced tool steels (1) I generation of high-speed steels (HSS) • carbide temper hardness steels 500 - 650 0C, e.g. HS 6 – 5 – 2 – 5W-Mo -V –Co • Intermetallic temper hardness steels650 - 750 0C, Co7W6, (CoFe)7W6 etc.(11 – 20%)W; 7% Mo; (1-3%)V; (20 – 25%)Co Structure (cast and rolled) Advanced metallic materials 20

  21. Advanced tool steels (2) II generation of high-speed steels – PM steels (PM/HIP) Uddeholmi steels Vanadis 4, 6, 10, 23, 30, 60 (Super Clean) (1,3 - 2,9%) C; → 6,5 W; (1,5 - 7%) Mo; (3,1 - 9,8%) V; → 10,5% Co Structure (PM / HIPed) Advanced metallic materials 21

  22. Advanced tool steels (3) III generation of high-speed steels – Sprayformed, SF + HIP PM steels, Vanadis 4 EXTRA WEARTEC 2,8 C; 8,9 V; 7,0 Cr; 2,3 Mo; Si; Mn ROLTEC 1,4C; 4,6Cr; 3,7 V; 3,2 Mo; Si; Mn TOUGHTEC 1,6C; 7,2V; 5,0 Cr; 2,3 Mo; Si; Mn Advanced metallic materials 22

  23. SF /HIP Similar to PM/HIP, slab formation by spraying methods High-Tech Materials & Technologies 23

  24. TRZ, GPa Diameter of carbide particles, m Strength of high-speed steels Advanced metallic materials 24

  25. High-strength structural steels • High-performance tool steels • Metallic-ceramicmaterials • Light-weight metals and alloys • Superalloys Advanced metallic materials 25

  26. Classification of wear resistant materials depending on volumetric content of hard phase Advanced metallic materials 26

  27. Metallic-ceramic composites Carbide steels and alloys • Ferro-TiC Steel (50 - 70)% -TiC • Double-reinforced MMC (Cr-steel + 20%VC) + 20%WC • Self-fluxing alloys NiCrSiB +  50% (WC-Co) Ceramic/metallic • TiC-NiMo – (50 - 60)% (NiMo)(2:1) 920 – 1620 HV10 • Cr3C2-NiCr – (50 - 60)% NiCr Advanced metallic materials 27

  28. High-strength structural steels • High-performance tool steels • Metallic-ceramicmaterials • Light-weight metals and alloys • Superalloys Advanced metallic materials 28

  29. Light-weight materials – Mg alloys Mg-alloys (Mg:  = 1740 kg/m3, Ts – 649 0C) Alloying elements: Al (3 - 10%); Zn, up to (5 – 6%); Mn; Zr Rm 300 N/mm2 (deformable alloys) Rm/  20 220 N/mm2 (cast alloy) Advanced metallic materials 29

  30. Light-weight materials – Al alloys Al-alloys • Al-Li alloys (Li is only dopant, which  Rm, E, however  = 2500 kg/m3) 2Li, 4Mg,  Rm = 220 – 350; Rp0,2 = 135 – 210 N/mm2 • Powder-aluminum-alloys • dispersion strengthened Al-alloys (SAP-Al2O315%, Al-C-alloys – Al4C3 20 volume%), allowed working temperature up to 550 0C • Foam-aluminum ( ~ 200 kg/m3) Advanced metallic materials 30

  31. High-strength structural steels • High-performance tool steels • Metallic-ceramicmaterials • Light-weight metals and alloys • Superalloys Advanced metallic materials 31

  32. Superalloys …alloys capable of service at high temperatures, usually above 1000 °C → heat-resistant high-temperature strength alloys • Ni-alloys • Co-alloys heat resistance (oxidation resistance > 600°C) refractory steels = heat res. + high temp. strength Advanced metallic materials 32

  33. Ni-alloys Ni uses: ca 60% – stainless steels 12% – Ni-alloys 10% – coatings 10% – alloy steels Heat resistant alloys (superalloys) • wrought (Inconel Ni – 20-23 Cr; Hastelloy Ni- 7-22 Cr-Co) • cast ( polycrystalline, directionally solidified, single crystal) • PM (HIP-ed, IN 100, Rene 95→ gasturbine disk) 718 (cast) Ni – (4,75 – 5,5%) Nb → aerospace, nuclear structural applications (-250 – +700 °C). MA 754 PM/HIP Ni – 1% Y2O3 Advanced metallic materials 33

  34. Co-alloys Co uses: ca 46% – superalloys 15% – steels 10% – cemented carbides Wear resistant alloys • Stellite – Co (10 –30%); Cr (1,5 –22) Ni; up to 15% W; 1 Mo Heat resistant alloys • wrought Co + (20 –30%) Cr; (14 –15%) W • cast Co +(23 –29%) Cr; (1 –10 %) Ni; 7 W Corrosion resistant alloys Ultimet Co + 26Cr; 9Ni; 5Mo; 2W Advanced metallic materials 34

  35. General stress-rupture behaviour of superalloys

  36. Thank you for your attention! TUT materials engineering web-site: www.ttu.ee/mti mti@ttu.ee

More Related