1 / 3

ATLAS TAS dismantling and replacement

ATLAS TAS dismantling and replacement. ATLAS TAS Additional information. June 2 nd , 2014. Prepared by Michel RAYMOND. Additional plate on JN. From the TAS installation time, an additional plate has been added.

adelie
Download Presentation

ATLAS TAS dismantling and replacement

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ATLAS TAS dismantling and replacement ATLAS TAS Additional information June 2nd, 2014 Prepared by Michel RAYMOND

  2. Additional plate on JN From the TAS installation time, an additional plate has been added. The purpose is to be interfaced with the vacuum pipe : see drawing LHCVC1J_0010 From the picture, it does not look possible to remove TAS from ATLAS side without removing this large plate

  3. Additional plate on JN • The full assembly as it can see here is detailed is drawing LHCVC1J_0045 • Does a 3D model exist on Catia ??? • Investigation on going • In any case, its removing should be foreseen

More Related